{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2026,5,15]],"date-time":"2026-05-15T01:29:55Z","timestamp":1778808595596,"version":"3.51.4"},"reference-count":26,"publisher":"MDPI AG","issue":"1","license":[{"start":{"date-parts":[[2018,12,24]],"date-time":"2018-12-24T00:00:00Z","timestamp":1545609600000},"content-version":"vor","delay-in-days":0,"URL":"https:\/\/2.zoppoz.workers.dev:443\/https\/creativecommons.org\/licenses\/by\/4.0\/"}],"content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Sensors"],"abstract":"<jats:p>Turbine tip clearance of aero-engine is important to engine performance. Proper control of rotor tip clearance contributes to engine efficiency improvement and fuel consumption reduction. Therefore, accurate tip clearance measurement is essential. The inductive measurement method is one of the non-contact distance measurement methods, which has the characteristics of high sensitivity, fast response speed and strong anti-interference ability. Based on the principle of inductive sensor measuring tip clearance, the ambient temperature change will cause the material electromagnetic performance change for the conductivity and permeability varies with temperature. The calibration experiment was conducted to obtain the sensor resolution and sensing range. The effect of temperature on sensor parameters was extracted from high temperature experiment data. Results show the resolution of planar coil made of platinum wire can be 10 \u03bcm and the maximum sensing range can reach 5 mm. At temperature from 500 \u2103 to 1100 \u2103, coil inductance almost does not change with temperature while coil resistance varies exponentially with temperature, that means the coil inductance variation can reflect the tip clearance change and resistance can indicate the measuring temperature.<\/jats:p>","DOI":"10.3390\/s19010061","type":"journal-article","created":{"date-parts":[[2018,12,24]],"date-time":"2018-12-24T10:37:49Z","timestamp":1545647869000},"page":"61","update-policy":"https:\/\/2.zoppoz.workers.dev:443\/https\/doi.org\/10.3390\/mdpi_crossmark_policy","source":"Crossref","is-referenced-by-count":19,"title":["Experimental Investigation of High Temperature-Resistant Inductive Sensor for Blade Tip Clearance Measurement"],"prefix":"10.3390","volume":"19","author":[{"ORCID":"https:\/\/2.zoppoz.workers.dev:443\/https\/orcid.org\/0000-0002-5239-3323","authenticated-orcid":false,"given":"Ziyu","family":"Zhao","sequence":"first","affiliation":[{"name":"School of Power and Energy, Northwestern Polytechnical University, Youyi West Road 127#, Xi\u2019an 710054, China"}],"role":[{"role":"author","vocabulary":"crossref"}]},{"given":"Zhenxia","family":"Liu","sequence":"additional","affiliation":[{"name":"School of Power and Energy, Northwestern Polytechnical University, Youyi West Road 127#, Xi\u2019an 710054, China"}],"role":[{"role":"author","vocabulary":"crossref"}]},{"given":"Yaguo","family":"Lyu","sequence":"additional","affiliation":[{"name":"School of Power and Energy, Northwestern Polytechnical University, Youyi West Road 127#, Xi\u2019an 710054, China"}],"role":[{"role":"author","vocabulary":"crossref"}]},{"given":"Yajun","family":"Gao","sequence":"additional","affiliation":[{"name":"School of Power and Energy, Northwestern Polytechnical University, Youyi West Road 127#, Xi\u2019an 710054, China"}],"role":[{"role":"author","vocabulary":"crossref"}]}],"member":"1968","published-online":{"date-parts":[[2018,12,24]]},"reference":[{"key":"ref_1","unstructured":"Scott, B.L., and Bruce, M.S. (2002, January 7\u201310). Turbine engine clearance control systems: Current practices and future directions. Proceedings of the 38th AIAA\/ASME\/SAE\/ASEE Joint Propulsion Conference and Exhibit, Indianapolis, IN, USA."},{"key":"ref_2","unstructured":"Scott, B.L., Bruce, M.S., and Robbie, M.G. (2003, January 5). Test rig for evaluating active turbine tip clearance control concepts. Proceedings of the NASA Seal\/Secondary Air System Workshop, Cleveland, OH, USA."},{"key":"ref_3","unstructured":"Weimer, M. (2002, January 7\u201310). Design and test of an active tip clearance system for centrifugal compressors. Proceedings of the 38th AIAA\/ASME\/SAE\/ASEE Joint Propulsion Conference and Exhibit, Indianapolis, IN, USA."},{"key":"ref_4","unstructured":"Mark, R.W., James, W.R., Christopher, E.H., and Timothy, J.B. (2009, January 5\u20138). Testing of a microwave blade tip clearance sensor at the NASA Glenn Research Center. Proceedings of the 47th AIAA Aerospace Science Meeting, Orlando, FL, USA."},{"key":"ref_5","unstructured":"Mark, R.W., Ali, A.A., and Timothy, J.B. (2010, January 20\u201322). A Microwave Blade Tip Clearance Sensor for Propulsion Health Monitoring. Proceedings of the AIAA Infotech@Aerospace, Atlanta, GA, USA."},{"key":"ref_6","unstructured":"(2018, March 23). Scientific and Technical Information Program, Available online: https:\/\/2.zoppoz.workers.dev:443\/https\/ntrs.nasa.gov\/search.jsp?R=20140009171."},{"key":"ref_7","doi-asserted-by":"crossref","unstructured":"Poppe, G.L., Marple, D.T.F., and Baumbick, R.J. (1982, January 21\u201323). Optical Tip Clearance Sensor for Aircraft Engine Controls. Proceedings of the AIAA\/SAE\/ASME 18th Joint Propulsion Conference, Cleveland, OH, USA.","DOI":"10.2514\/6.1982-1131"},{"key":"ref_8","doi-asserted-by":"crossref","first-page":"7385","DOI":"10.3390\/s130607385","article-title":"An Optical Fiber Bundle Sensor for Tip Clearance and Tip Timing Measurements in a Turbine Rig","volume":"13","author":"Beloki","year":"2013","journal-title":"Sensors"},{"key":"ref_9","first-page":"2663","article-title":"Different Configurations of a Reflective Intensity-Modulated Optical Sensor to Avoid Modal Noise in Tip-Clearance Measurements","volume":"12","author":"Zubia","year":"2015","journal-title":"J. Lightw. Tech."},{"key":"ref_10","doi-asserted-by":"crossref","unstructured":"Garc\u00eda, I., Przysowa, R., Amorebieta, J., and Joseba, Z. (2016). Tip-Clearance Measurement in the First Stage of the Compressor of an Aircraft Engine. Sensors, 16.","DOI":"10.3390\/s16111897"},{"key":"ref_11","doi-asserted-by":"crossref","unstructured":"Gil-Garc\u00eda, J.M., Sol\u00eds, A., and Aranguren, G. (2017). An Architecture for On-Line Measurement of the Tip Clearance and Time of Arrival of a Bladed Disk of an Aircraft Engine. Sensors, 17.","DOI":"10.3390\/s17102162"},{"key":"ref_12","doi-asserted-by":"crossref","unstructured":"Durana, G., Amorebieta, J., and Fernandez, R. (2018). Design, Fabrication and Testing of a High-Sensitive Fibre Sensor for Tip Clearance Measurements. Sensors, 18.","DOI":"10.3390\/s18082610"},{"key":"ref_13","unstructured":"Andreas, K., Stefan, S., Thomas, R., and Ken, H. (2006, January 26\u201329). Spatial and temporal high-resolution optical tip-clearance probe for harsh environments. Proceedings of the 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal."},{"key":"ref_14","first-page":"377","article-title":"The measurement of blade-tip clearances in aircraft turbines by a capacitance method","volume":"100","author":"Mossop","year":"1953","journal-title":"Proc. Ins. Elec. Eng."},{"key":"ref_15","doi-asserted-by":"crossref","unstructured":"Muller, D., Shear, A.G., Mozumdar, S., and Johann, E. (1996, January 10\u201313). Capacitive measurement of compressor and turbine blade tip to casing running clearance. Proceedings of the International Gas Turbine and Aeroengine Congress & Exhibition, Birmingham, UK.","DOI":"10.1115\/96-GT-349"},{"key":"ref_16","doi-asserted-by":"crossref","unstructured":"Chana, K.S., Cardwell, M.T., and Sullivan, J.S. (2013, January 3\u20137). The development of a hot section eddy current sensor for turbine tip clearance measurement. Proceedings of the ASME Turbo Expo, San Antonio, TX, USA.","DOI":"10.1115\/GT2013-94104"},{"key":"ref_17","doi-asserted-by":"crossref","unstructured":"Chana, K.S., Sridhar, V., and Singh, D. (2016, January 13\u201317). The use of eddy current sensors for the measurement of rotor blade Tip timing: Development of a new method based on integration. Proceedings of the ASME Turbo Expo, Seoul, Korea.","DOI":"10.1115\/GT2016-57368"},{"key":"ref_18","doi-asserted-by":"crossref","unstructured":"Sridhar, V., and Chana, K.S. (2017, January 26\u201330). Tip-clearnce measurement on an engine high pressure turbine using an eddy current sensor. Proceedings of the ASME Turbo Expo, Charlotte, NC, USA.","DOI":"10.1115\/GT2017-63803"},{"key":"ref_19","doi-asserted-by":"crossref","unstructured":"Sridhar, V., and Chana, K.S. (2017, January 26\u201330). Development of a combined eddy current and pressure sensor for gas turbine blade health monitoring. Proceedings of the ASME Turbo Expo, Charlotte, NC, USA.","DOI":"10.1115\/GT2017-63807"},{"key":"ref_20","doi-asserted-by":"crossref","first-page":"065018","DOI":"10.1088\/0964-1726\/23\/6\/065018","article-title":"A high sensitivity inductive sensor for blade tip clearance measurement","volume":"6","author":"Du","year":"2014","journal-title":"Smart Mater. Struct."},{"key":"ref_21","doi-asserted-by":"crossref","unstructured":"Han, Y., Zhong, C., Zhu, X.L., and Zhe, J. (2018). Online monitoring of dynamic tip clearance of turbine blades in high temperature environments. Meas. Sci. Technol., accepted.","DOI":"10.1088\/1361-6501\/aa912e"},{"key":"ref_22","first-page":"749","article-title":"High temperature eddy current displacement sensor based on temperature drift compensation","volume":"4","author":"Lv","year":"2015","journal-title":"J. Zhejiang Univ. (Eng. Sci.)"},{"key":"ref_23","doi-asserted-by":"crossref","first-page":"362","DOI":"10.1016\/j.sna.2013.09.016","article-title":"Ultrastable and highly sensitive eddy current displacement sensor using self-temperature compensation","volume":"203","author":"Wang","year":"2013","journal-title":"Sens. Actuators"},{"key":"ref_24","first-page":"1398","article-title":"Simple inductance formulas for radio coils","volume":"16","author":"Wheeler","year":"1928","journal-title":"Proc. Inst. Radio Eng."},{"key":"ref_25","doi-asserted-by":"crossref","unstructured":"Zhao, Z.Y., Liu, Z.X., Lyu, Y.G., and Xu, X.X. (2018, January 11\u201315). Verification and design of high precision eddy current sensor for tip clearance measurement. Proceedings of the ASME Turbo Expo, Oslo, Norway.","DOI":"10.1115\/GT2018-75643"},{"key":"ref_26","first-page":"132","article-title":"Design and verification of high resolution eddy current sensor for blade tip clearance measurement","volume":"6","author":"Zhao","year":"2018","journal-title":"Chin. J. Sci. Inst."}],"container-title":["Sensors"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/2.zoppoz.workers.dev:443\/https\/www.mdpi.com\/1424-8220\/19\/1\/61\/pdf","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2025,10,11]],"date-time":"2025-10-11T15:35:56Z","timestamp":1760196956000},"score":1,"resource":{"primary":{"URL":"https:\/\/2.zoppoz.workers.dev:443\/https\/www.mdpi.com\/1424-8220\/19\/1\/61"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2018,12,24]]},"references-count":26,"journal-issue":{"issue":"1","published-online":{"date-parts":[[2019,1]]}},"alternative-id":["s19010061"],"URL":"https:\/\/2.zoppoz.workers.dev:443\/https\/doi.org\/10.3390\/s19010061","relation":{},"ISSN":["1424-8220"],"issn-type":[{"value":"1424-8220","type":"electronic"}],"subject":[],"published":{"date-parts":[[2018,12,24]]}}}