High-Performance Materials and Coatings for Industry (HPMC4I)

🌍 𝐄𝐑𝐀 𝐓𝐚𝐥𝐞𝐧𝐭𝐬 𝐒𝐡𝐚𝐫𝐞 𝐓𝐡𝐞𝐢𝐫 𝐒𝐞𝐜𝐨𝐧𝐝𝐦𝐞𝐧𝐭 𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞 🎙️ Join us for two short talks by CLiCAM ERA Talents, Dr. Serhy Tkachenko and Assoc. Prof. Ladislav Celko, who will share their experiences from their recent secondments at Zoz GmbH (Germany) and Castolin Eutectic (Poland). These hands-on training experiences took place as part of the international CLiCAM project. 🌐 📍 𝐖𝐡𝐞𝐫𝐞: CEITEC - Central European Institute of Technology, Brno University of Technology, Purkyňova 123, 612 00 Brno, Meeting Room S 📅 𝐃𝐚𝐭𝐞: Thursday, October 15, 2026 🕒 𝐓𝐢𝐦𝐞: 2:00 p.m. 💡 Discover what our ERA Talents worked on, which 𝐭𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐢𝐞𝐬 𝐭𝐡𝐞𝐲 𝐞𝐱𝐩𝐥𝐨𝐫𝐞𝐝, 𝐚𝐧𝐝 𝐰𝐡𝐚𝐭 𝐤𝐧𝐨𝐰𝐥𝐞𝐝𝐠𝐞 𝐚𝐧𝐝 𝐬𝐤𝐢𝐥𝐥𝐬 𝐭𝐡𝐞𝐲 𝐠𝐚𝐢𝐧𝐞𝐝 𝐭𝐡𝐫𝐨𝐮𝐠𝐡 𝐢𝐧𝐭𝐞𝐫𝐧𝐚𝐭𝐢𝐨𝐧𝐚𝐥 𝐜𝐨𝐥𝐥𝐚𝐛𝐨𝐫𝐚𝐭𝐢𝐨𝐧. Beyond technical expertise, the talks will also highlight valuable experience in 𝐩𝐫𝐨𝐣𝐞𝐜𝐭 𝐦𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭, 𝐥𝐞𝐚𝐝𝐞𝐫𝐬𝐡𝐢𝐩, 𝐚𝐧𝐝 𝐜𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧. ✨ Everyone is welcome - we look forward to seeing you there! #CLiCAM #ERATalents #HPMC4I #ProjectManagement #Research #Science #Industry #Leadership #CommunicationSkills #MaterialsScience #InternationalCollaboration

🍂 STÁLE SE MŮŽETE REGISTROVAT NA WORKSHOP! 🍂 Využití metalografie při řešení výrobních problémů! 🔬   📅 13. – 15. 10. 2026 Řešíte ve výrobě problém s materiálem, vadami, opotřebením nebo poškozením součástí? Přineste si vlastní vzorky a konkrétní problém z praxe – společně se na něj podíváme pomocí moderních metalografických metod. Workshop je zaměřený na praktické řešení problémů z průmyslové praxe a na komplexní materiálovou analýzu. Zaměříme se například na: ✅ kvalitu vstupního materiálu ✅ vliv výrobních procesů – lití, tváření, svařování, 3D tisk aj. ✅ tepelné zpracování a povrchové úpravy ✅ vznik a charakter defektů ✅ provozní poškození a opotřebení ✅ vztah mezi mikrostrukturou, vlastnostmi materiálu a životností součástí 🔬 Co si na workshopu prakticky vyzkoušíte? • přípravu vlastních metalografických vzorků • práci s moderními metalografickými přístroji #QATM, #MetalcoTesting • světelnou mikroskopii #Olympus a měření tvrdosti • v případě potřeby také rastrovací elektronovou mikroskopii • vyhodnocení vzorků podle norem a firemních specifikací • interpretaci souvislostí mezi mikrostrukturou, technologií výroby a vlastnostmi materiálu 📌 Registrace a více informací: https://lnkd.in/d5z-2y58 📩 Dotazy: metlab@vut.cz Těšíme se na setkání v říjnu! 🍂🔬 #Metalografie #AnalýzaMateriálů #MateriálovéInženýrství #Průmysl #Workshop #Laboratoř #Mikroskopie #VýrobníProcesy #AnalýzaPoškození #ŘízeníKvality #Struktura #Mikrostruktura #Tvrdost #Kvalita #Poškození

🇮🇹 ESCC 2026 | Naples, Italy Four days of 𝐩𝐨𝐰𝐝𝐞𝐫 𝐭𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲, 𝐦𝐞𝐜𝐡𝐚𝐧𝐨𝐜𝐡𝐞𝐦𝐢𝐬𝐭𝐫𝐲, 𝐦𝐢𝐥𝐥𝐢𝐧𝐠 𝐭𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲, 𝐦𝐨𝐝𝐞𝐥𝐥𝐢𝐧𝐠 𝐨𝐟 𝐩𝐨𝐰𝐝𝐞𝐫 𝐩𝐫𝐨𝐜𝐞𝐬𝐬𝐢𝐧𝐠, 𝐢𝐧𝐬𝐩𝐢𝐫𝐢𝐧𝐠 𝐝𝐢𝐬𝐜𝐮𝐬𝐬𝐢𝐨𝐧𝐬, 𝐚𝐧𝐝 𝐧𝐞𝐰 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧𝐬 at #ESCC2026! ⚙️🔬 From 27–30 September 2026, members of the #HPMC4I research group participated in the 19th European Symposium on Comminution & Classification (ESCC 2026), hosted by the University of Naples Federico II. 🎤 Oral presentations: 🔹 Ladislav Celko – 𝘔𝘰𝘥𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘔𝘢𝘨𝘯𝘦𝘴𝘪𝘶𝘮-𝘈𝘭𝘶𝘮𝘪𝘯𝘢𝘵𝘦 𝘚𝘱𝘪𝘯𝘦𝘭 𝘗𝘰𝘸𝘥𝘦𝘳 𝘧𝘰𝘳 𝘛𝘩𝘦𝘳𝘮𝘢𝘭 𝘚𝘱𝘳𝘢𝘺 𝘈𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 🔹 Serhy Tkachenko – 𝘌𝘧𝘧𝘦𝘤𝘵𝘴 𝘰𝘧 𝘏𝘪𝘨𝘩-𝘌𝘯𝘦𝘳𝘨𝘺 𝘒𝘪𝘯𝘦𝘵𝘪𝘤 𝘔𝘪𝘭𝘭𝘪𝘯𝘨 𝘊𝘰𝘯𝘥𝘪𝘵𝘪𝘰𝘯𝘴 𝘰𝘯 𝘵𝘩𝘦 𝘔𝘦𝘤𝘩𝘢𝘯𝘰𝘤𝘩𝘦𝘮𝘪𝘤𝘢𝘭𝘭𝘺 𝘈𝘴𝘴𝘪𝘴𝘵𝘦𝘥 𝘚𝘺𝘯𝘵𝘩𝘦𝘴𝘪𝘴 𝘰𝘧 𝘓𝘢𝘯𝘵𝘩𝘢𝘯𝘶𝘮 𝘊𝘰𝘣𝘢𝘭𝘵 𝘖𝘹𝘪𝘥𝘦 📊 Poster presentations: 🔹 Michaela Remešová – 𝘛𝘩𝘦 𝘙𝘰𝘭𝘦 𝘰𝘧 𝘗𝘰𝘸𝘥𝘦𝘳 𝘚𝘪𝘻𝘦 𝘋𝘪𝘴𝘵𝘳𝘪𝘣𝘶𝘵𝘪𝘰𝘯 𝘰𝘯 𝘵𝘩𝘦 𝘍𝘭𝘰𝘸𝘢𝘣𝘪𝘭𝘪𝘵𝘺 𝘰𝘧 𝘊𝘦𝘳𝘢𝘮𝘪𝘤 𝘛𝘩𝘦𝘳𝘮𝘢𝘭 𝘚𝘱𝘳𝘢𝘺 𝘗𝘰𝘸𝘥𝘦𝘳𝘴 🔹 Vendula Bednaříková – 𝘖𝘱𝘵𝘪𝘮𝘪𝘻𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘏𝘺𝘥𝘳𝘰𝘵𝘩𝘦𝘳𝘮𝘢𝘭 𝘚𝘺𝘯𝘵𝘩𝘦𝘴𝘪𝘴 𝘰𝘧 𝘓𝘢𝘯𝘵𝘩𝘢𝘯𝘶𝘮-𝘊𝘰𝘣𝘢𝘭𝘵 𝘗𝘦𝘳𝘰𝘷𝘴𝘬𝘪𝘵𝘦 (𝘓𝘢𝘊𝘰𝘖₃): 𝘐𝘯𝘧𝘭𝘶𝘦𝘯𝘤𝘦 𝘰𝘧 𝘱𝘏, 𝘚𝘵𝘰𝘪𝘤𝘩𝘪𝘰𝘮𝘦𝘵𝘳𝘺, 𝘢𝘯𝘥 𝘚𝘪𝘯𝘵𝘦𝘳𝘪𝘯𝘨 𝘛𝘦𝘮𝘱𝘦𝘳𝘢𝘵𝘶𝘳𝘦 🤝 Beyond presenting our research, #ESCC2026 was a great opportunity to exchange ideas, strengthen international connections, and explore new research collaborations. ⚙️ A special highlight was our meeting with Leos Benes from FRITSCH Milling and Sizing, where we discussed new opportunities for cooperation in powder processing and characterisation. 🙏 Many thanks to the organisers especially Prof. Fabio Montagnaro and his team, Dr. Marco Balsamo, Roberto Solimene, colleagues, and partners for the inspiring discussions and new connections! 💡 We gratefully acknowledge the financial support of #GACR (No. 25-17855K) and CLiCAM. Also, #TACR and GlaCerHub for their support of our research activities.   #ESCC2026 #PowderTechnology #MaterialsScience #Mechanochemistry #ThermalSpray #MillingTechnology #ChemicalSynthesis #Characterisation #Powders #ThermalSpray #Research #Collaboration #Comminution #Classification #Recycling #EnvironmentalApplications #RenewableEnergy #CLiCAM #GLACERHUB #CEITECScience #TREIBACHER #AIDIC #FunGlass #ZozGmbH

🎉 𝐍𝐞𝐰 𝐩𝐮𝐛𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐟𝐫𝐨𝐦 𝐨𝐮𝐫 𝐠𝐫𝐨𝐮𝐩 𝐢𝐧 𝐭𝐡𝐞 𝐉𝐨𝐮𝐫𝐧𝐚𝐥 𝐨𝐟 𝐭𝐡𝐞 𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥 𝐁𝐞𝐡𝐚𝐯𝐢𝐨𝐫 𝐨𝐟 𝐁𝐢𝐨𝐦𝐞𝐝𝐢𝐜𝐚𝐥 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 How does low-temperature gas nitriding affect the mechanical behaviour of porous titanium scaffolds under cyclic loading?   Our latest study, “𝐒𝐭𝐚𝐢𝐫𝐜𝐚𝐬𝐞 𝐛𝐥𝐨𝐜𝐤-𝐜𝐲𝐜𝐥𝐢𝐧𝐠 𝐜𝐨𝐦𝐩𝐫𝐞𝐬𝐬𝐢𝐨𝐧 𝐨𝐟 𝐡𝐢𝐞𝐫𝐚𝐫𝐜𝐡𝐢𝐜𝐚𝐥𝐥𝐲 𝐩𝐨𝐫𝐨𝐮𝐬 𝐃𝐈𝐖 𝐭𝐢𝐭𝐚𝐧𝐢𝐮𝐦 𝐬𝐜𝐚𝐟𝐟𝐨𝐥𝐝𝐬: 𝐄𝐟𝐟𝐞𝐜𝐭 𝐨𝐟 𝐥𝐨𝐰-𝐭𝐞𝐦𝐩𝐞𝐫𝐚𝐭𝐮𝐫𝐞 𝐠𝐚𝐬 𝐧𝐢𝐭𝐫𝐢𝐝𝐢𝐧𝐠,” explores this question in hierarchically porous titanium scaffolds produced by Direct Ink Writing (DIW).   Understanding how these structures respond to cyclic loading is an important step towards designing more reliable and durable next-generation porous titanium implants.   👏 Congratulations to Karel Slámečka and all co-authors on this achievement!   We gratefully acknowledge the support of the Czech Science Foundation (GAČR) under project No. 23-07879S.   🔗 Read the article: https://lnkd.in/duVtmju7   #NewPublication #Biomaterials #Titanium #AdditiveManufacturing #DIW #SurfaceEngineering #Nitriding #HPMC4I #Research #CEITECScience #GACR #JMBBM

Edu-GArD3n at the Shaping 10!🏛️✨   Last week, our researcher, Carolina Oliver, and our colleagues, Giulia Verlato and Hamada E., represented the Edu-GArD3n Erasmus+ Project at the #Shaping10 conference in Padua, Italy. #Shaping10 was co-organised by the EUROPEAN CERAMIC SOCIETY, the Italian Ceramic Society, and the Università degli Studi di Padova (UNIPD) / University of Padua, bringing together researchers and experts from across the scientific community.   Through posters, presentations and promotional materials, our team showcased the Edu-GArD3n vision:    🌱 Sustainable and green additive manufacturing  📚 Eco-conscious approaches to modern education  💡 Innovative learning tools for the future   A huge thank you to the organisers for this wonderful opportunity to exchange ideas, build connections, and share our work with the wider scientific community.   Congratulations to our valued project partners at the University of Padova for hosting such a fantastic event!   Curious about how Edu-GArD3n Erasmus+ Project is shaping the future of sustainable manufacturing education?   🔗 Explore the project: edu-gard3n.eu   #EduGArD3n #Shaping10 #AdditiveManufacturing #GreenManufacturing #Sustainability #ErasmusPlus #Biomaterials #ResearchImpact #CEITECScience #HPMC4I

𝐆𝐫𝐞𝐚𝐭 𝐧𝐞𝐰𝐬 𝐟𝐨𝐫 𝐨𝐮𝐫 𝐫𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐭𝐞𝐚𝐦 🌟   Huge congratulations to Carolina Oliver and 𝐄𝐝𝐠𝐚𝐫 𝐌𝐨𝐧𝐭𝐮𝐟𝐚𝐫, who have received official recognition as members of Mexico's SNII (Sistema Nacional de Investigadoras e Investigadores). A prestigious national peer-reviewed ranking and distinction system recognising outstanding scientific achievements, research excellence and academic contributions. 🎉   The SNII distinction, administered by SECIHTI (Secretaría de Ciencia, Humanidades, Tecnología e Innovación Secihti), is an important recognition of their scientific work and continued contribution to their respective research fields.   We are delighted to have such dedicated colleagues in our team, driving research and innovation and bringing their international expertise to #Brno and CEITEC - Central European Institute of Technology, Vysoké učení technické v Brně. 🚀🧪   Congratulations, Carolina Oliver and 𝐄𝐝𝐠𝐚𝐫 𝐌𝐨𝐧𝐭𝐮𝐟𝐚𝐫, on this well-deserved achievement! 👏   #CEITECScience #ScientificExcellence #Research #SNII #AcademicAchievement #Science #MaterialsScience #ProudTeam

🔬🎓 𝐑𝐞𝐜𝐨𝐠𝐧𝐢𝐬𝐢𝐧𝐠 𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐜𝐞 𝐢𝐧 𝐏𝐡𝐃 𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 The #HPMC4I research group congratulate our colleague Lenka Drotárová on winning the prestigious 𝐑𝐞𝐜𝐭𝐨𝐫'𝐬 𝐀𝐰𝐚𝐫𝐝 at Vysoké učení technické v Brně for her outstanding PhD thesis! 🏆 Her thesis, entitled "In vitro reconstruction of the bone marrow microenvironment by modular integration of additively manufactured scaffolds and interpenetrating polymer networks", is the result of many years of hard work, academic rigour, and determination to push the boundaries of research in biomaterials and additive manufacturing. 🔬 Lenka Drotárová, congratulations on this well-deserved achievement! We are incredibly proud of you and this phenomenal milestone! 🚀✨ More information: https://lnkd.in/dZjvtRFw #BUT #Award #PhDExcellence #AcademicAchievement #AdditiveManufacturing #Biomaterials #ResearchImpact #CEITECScience #WomenInScience

🤝 Moving NIR-CURATOR forward! It was a pleasure to welcome Prof. Vignesh Kumaravel and his team - Dr. Agnieszka Krzemińska, Dr. Oumayma Abdessadak, and Arghyadeep Mayur - from Lodz University of Technology / ICRI-BioM, Poland. Their visit took place as part of the NIR-CURATOR project, funded by the GACR (GA 26-19991L) and the National Science Centre, Poland, under the Lead Agency programme. 🔬 This productive visit enabled the #NIRCURATOR project consortium to review the project progress, reach key scientific agreements, confirm the timeline, and outline activities for the next six months. 🤝We are grateful to our Polish colleagues for the great discussions, fruitful discussions, clearly defined goals, and strong international collaboration! #CEITECScience #NIRCURATOR #ResearchCollaboration #InternationalCollaboration #TitaniumAlloys #Biomaterials #GACR #NCN #AdditiveManufacturing #HPMC4I

🔬 HPMC4I at COMAT 2026!   We are pleased to share our participation in #COMAT2026 conference - 𝐑𝐞𝐜𝐞𝐧𝐭 𝐓𝐫𝐞𝐧𝐝𝐬 𝐢𝐧 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬, organised by the COMTES FHT a.s. Research Center in Pilsen.   🧪Our team extensively contributed to the scientific programme:   🎤 Dr. 𝐄𝐝𝐠𝐚𝐫 𝐌𝐨𝐧𝐭𝐮𝐟𝐚𝐫 delivered the lecture “𝘍𝘢𝘵𝘪𝘨𝘶𝘦 𝘉𝘦𝘩𝘢𝘷𝘪𝘰𝘶𝘳 𝘢𝘯𝘥 𝘉𝘪𝘰𝘭𝘰𝘨𝘪𝘤𝘢𝘭 𝘗𝘳𝘰𝘱𝘦𝘳𝘵𝘪𝘦𝘴 𝘰𝘧 𝘗𝘰𝘳𝘰𝘶𝘴 𝘗𝘶𝘳𝘦 𝘛𝘪𝘵𝘢𝘯𝘪𝘶𝘮 𝘗𝘳𝘰𝘥𝘶𝘤𝘦𝘥 𝘣𝘺 𝘌𝘹𝘵𝘳𝘶𝘴𝘪𝘰𝘯 𝘈𝘥𝘥𝘪𝘵𝘪𝘷𝘦 𝘔𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨”   🎤Dr. Serhy Tkachenko presented results on “𝘈𝘥𝘷𝘢𝘯𝘤𝘦𝘥 𝘚𝘺𝘯𝘵𝘩𝘦𝘴𝘪𝘴 𝘢𝘯𝘥 𝘋𝘪𝘳𝘦𝘤𝘵 𝘐𝘯𝘬 𝘞𝘳𝘪𝘵𝘪𝘯𝘨 𝘰𝘧 𝘔𝘰𝘭𝘺𝘣𝘥𝘦𝘯𝘶𝘮-𝘉𝘢𝘴𝘦𝘥 𝘊𝘰𝘮𝘱𝘰𝘴𝘪𝘵𝘦 𝘗𝘰𝘸𝘥𝘦𝘳𝘴”   💡The conference also hosted the workshop “𝑩𝒊𝒐𝒊𝒏𝒔𝒑𝒊𝒓𝒆𝒅 𝒄𝒆𝒍𝒍𝒖𝒍𝒂𝒓 𝒂𝒄𝒕𝒖𝒂𝒕𝒐𝒓𝒔 – 𝒂𝒅𝒅𝒊𝒕𝒊𝒗𝒆 𝒎𝒂𝒏𝒖𝒇𝒂𝒄𝒕𝒖𝒓𝒊𝒏𝒈 𝒐𝒇 𝒎𝒖𝒍𝒕𝒊-𝒎𝒂𝒕𝒆𝒓𝒊𝒂𝒍𝒔,” organised within the framework of the BiCeps Project.   🤝The workshop brought together partners from the #BiCeps consortium - Vysoké učení technické v Brně (CEITEC - Central European Institute of Technology), COMTES FHT a.s., České vysoké učení technické v Praze Trencianska univerzita Alexandra Dubceka v Trencíne (FunGlass - Centre for Functional and Surface Functionalized Glass) and Lithoz - as well as conference participants to exchange knowledge, discuss innovative additive manufacturing technologies and explore future challenges in the field.   A big thank you to the #COMAT2026 organisers and our #BiCeps partners for the excellent collaboration, insightful discussions, and inspiring ideas!   💙We gratefully acknowledge the EIC Pathfinder BiCeps Project for supporting our participation in #COMAT2026. #CEITECScience #COMAT2026 #BiCeps #AdditiveManufacturing #MaterialsScience #AdvancedMaterials #Research #Innovation