| Age | Commit message (Collapse) | Author |
|---|
|
This could result in the error context misidentifying where the error
actually occurred.
Craig Ringer
|
|
Previously the "sent" field would be set to 0 and all other xlog
pointers be set to NULL if there were no valid values (such as when
in a backup sending walsender).
|
|
These would leak random xlog positions if a walsender used for backup would
a walsender slot previously used by a replication walsender.
In passing also fix a couple of cases where the xlog pointer is directly
compared to zero instead of using XLogRecPtrIsInvalid, noted by
Michael Paquier.
|
|
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
|
|
By accident the replication origin was not set properly in
DecodeCommit(). That's bad because the origin is passed to the output
plugins origin filter, and accessible from the output plugin via
ReorderBufferTXN->origin_id. Accessing the origin of individual changes
worked before the fix, which is why this wasn't notices earlier.
Reported-By: Craig Ringer
Author: Craig Ringer
Discussion: CAMsr+YFhBJLp=qfSz3-J+0P1zLkE8zNXM2otycn20QRMx380gw@mail.gmail.com
Backpatch: 9.5, where replication origins where introduced
|
|
Message style, plurals, quoting, spelling, consistency with similar
messages
|
|
Bernd Helmle complained that CreateReplicationSlot() was assigning the
same value to the same variable twice, so we could remove one of them.
Code inspection reveals that we can actually remove both assignments:
according to the author the assignment was there for beauty of the
strlen line only, and another possible fix to that is to put the strlen
in its own line, so do that.
To be consistent within the file, refactor all duplicated strlen()
calls, which is what we do elsewhere in the backend anyway. In
basebackup.c, snprintf already returns the right length; no need for
strlen afterwards.
Backpatch to 9.4, where replication slots were introduced, to keep code
identical. Some of this is older, but the patch doesn't apply cleanly
and it's only of cosmetic value anyway.
Discussion: http://www.postgresql.org/message-id/[email protected]
|
|
Prior to commit 0709b7ee72e4bc71ad07b7120acd117265ab51d0, access to
variables within a spinlock-protected critical section had to be done
through a volatile pointer, but that should no longer be necessary.
This continues work begun in df4077cda2eae3eb4a5cf387da0c1e7616e73204
and 6ba4ecbf477e0b25dd7bde1b0c4e07fc2da19348.
Thomas Munro and Michael Paquier
|
|
The existing hint talked about "may only contain letters", but the
actual requirement is more strict: only lower case letters are allowed.
Reported-By: Rushabh Lathia
Author: Rushabh Lathia
Discussion: AGPqQf2x50qcwbYOBKzb4x75sO_V3g81ZsA8+Ji9iN5t_khFhQ@mail.gmail.com
Backpatch: 9.4-, where replication slots were added
|
|
It was introduced alongside replication origins, by commit
5aa2350426c, so backpatch to 9.5.
Pointed out by Fujii Masao
|
|
Since 6fcd885 it is possible to immediately reserve WAL when creating a
slot via pg_create_physical_replication_slot(). Extend the replication
protocol to allow that as well.
Although, in contrast to the SQL interface, it is possible to update the
reserved location via the replication interface, it is still useful
being able to reserve upon creation there. Otherwise the logic in
ReplicationSlotReserveWal() has to be repeated in slot employing
clients.
Author: Michael Paquier
Discussion: CAB7nPqT0Wc1W5mdYGeJ_wbutbwNN+3qgrFR64avXaQCiJMGaYA@mail.gmail.com
|
|
Oskari Saarenmaa. Backpatch to stable branches where applicable.
|
|
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
|
|
Reported-By: Gurjeet Singh
|
|
Trivial change to reduce exposure of rel.h.
|
|
When creating a physical slot it's often useful to immediately reserve
the current WAL position instead of only doing after the first feedback
message arrives. That e.g. allows slots to guarantee that all the WAL
for a base backup will be available afterwards.
Logical slots already have to reserve WAL during creation, so generalize
that logic into being usable for both physical and logical slots.
Catversion bump because of the new parameter.
Author: Gurjeet Singh
Reviewed-By: Andres Freund
Discussion: CABwTF4Wh_dBCzTU=49pFXR6coR4NW1ynb+vBqT+Po=7fuq5iCw@mail.gmail.com
|
|
These make the code a bit easier to read, and make it easier to add a
more explicit notion of a slot's type at some point in the future.
Author: Gurjeet Singh
Discussion: CABwTF4Wh_dBCzTU=49pFXR6coR4NW1ynb+vBqT+Po=7fuq5iCw@mail.gmail.com
|
|
Fix a bunch of typos, and remove two superflous includes.
Author: Gurjeet Singh
Discussion: CABwTF4Wh_dBCzTU=49pFXR6coR4NW1ynb+vBqT+Po=7fuq5iCw@mail.gmail.com
Backpatch: 9.4
|
|
There's no reason not to expose both restart_lsn and confirmed_flush
since they have rather distinct meanings. The former is the oldest WAL
still required and valid for both physical and logical slots, whereas
the latter is the location up to which a logical slot's consumer has
confirmed receiving data. Most of the time a slot will require older
WAL (i.e. restart_lsn) than the confirmed
position (i.e. confirmed_flush_lsn).
Author: Marko Tiikkaja, editorialized by me
Discussion: [email protected]
|
|
XLogRecPtr was compared with InvalidTransactionId instead of
InvalidXLogRecPtr. As both are defined to the same value this doesn't
cause any actual problems, but it's still wrong.
Backpatch: 9.4-master, bug was introduced in 9.4
|
|
Amit reviewed the replication origins patch and made some good
points. Address them. This fixes typos in error messages, docs and
comments and adds a missing error check (although in a
should-never-happen scenario).
Discussion: CAA4eK1JqUBVeWWKwUmBPryFaje4190ug0y-OAUHWQ6tD83V4xg@mail.gmail.com
Backpatch: 9.5, where replication origins were introduced.
|
|
Previously the message erroneously printed the same LSN twice as the
assignment to the start_lsn variable was before the message. Correct
that.
Reported-By: Marko Tiikkaja
Author: Marko Tiikkaja
Backpatch: 9.5, where logical decoding was introduced
|
|
When spilling transaction data to disk a simple typo caused the output
file to be closed and reopened for every serialized change. That happens
to not have a huge impact on linux, which is why it probably wasn't
noticed so far, but on windows that appears to trigger actual disk
writes after every change. Not fun.
The bug fortunately does not have any impact besides speed. A change
could end up being in the wrong segment (last instead of next), but
since we read all files to the end, that's just ugly, not really
problematic. It's not a problem to upgrade, since transaction spill
files do not persist across restarts.
Bug: #13484
Reported-By: Olivier Gosseaume
Discussion: [email protected]
Backpatch to 9.4, where logical decoding was added.
|
|
|
|
Ensure that we null-terminate the result string (one place in pg_rewind).
Be paranoid about out-of-range results from readlink() (should not happen,
but there is no good reason for some call sites to be careful about it and
others not). Consistently use the whole buffer, not sometimes one byte
less. Ensure we emit an appropriate errcode() in all cases. Spell the
error messages the same way.
The only serious bug here is the missing null-termination in pg_rewind,
which is new code, so no need for a back-patch.
Abhijit Menon-Sen and Tom Lane
|
|
|
|
Patch by CharSyam, plus a few more I spotted with grep.
|
|
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
|
|
Dmitriy Olshevskiy
|
|
In 'always' mode, the standby independently archives all files it receives
from the primary.
Original patch by Fujii Masao, docs and review by me.
|
|
Windows can't reliably restore symbolic links from a tar format, so
instead during backup start we create a tablespace_map file, which is
used by the restoring postgres to create the correct links in pg_tblspc.
The backup protocol also now has an option to request this file to be
included in the backup stream, and this is used by pg_basebackup when
operating in tar mode.
This is done on all platforms, not just Windows.
This means that pg_basebackup will not not work in tar mode against 9.4
and older servers, as this protocol option isn't implemented there.
Amit Kapila, reviewed by Dilip Kumar, with a little editing from me.
|
|
We had many instances of the strlen + strspn combination to check for that.
This makes the code a bit easier to read.
|
|
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
|
|
Author: Erik Rijkers <[email protected]>
|
|
Michael Paquier and myself.
|
|
We can't rely on UINT16_MAX being present, which is why we introduced
PG_UINT16_MAX...
Buildfarm animal bowerbird via Andrew Gierth.
|
|
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: [email protected],
[email protected],
[email protected]
|
|
Some operating systems, including the reporter's windows, return EBADFD
or similar when fsync() is invoked on a O_RDONLY file descriptor.
Unfortunately RestoreSlotFromDisk() does exactly that; which causes
failures after restarts in at least some scenarios.
If you hit the bug the error message will be something like
ERROR: could not fsync file "pg_replslot/$name/state": Bad file descriptor
Simply use O_RDWR instead of O_RDONLY when opening the relevant file
descriptor to fix the bug. Unfortunately I have no way of verifying the
fix, but we've seen similar problems in the past.
This bug goes back to 9.4 where slots were introduced. Backpatch
accordingly.
Reported-By: Patrice Drolet
Bug: #13143:
Discussion: [email protected]
|
|
Author: Dmitriy Olshevskiy
Discussion: [email protected]
|
|
Right now it is visible whether a replication slot is active in any
session, but not in which. Adding the active_in column, containing the
pid of the backend having acquired the slot, makes it much easier to
associate pg_replication_slots entries with the corresponding
pg_stat_replication/pg_stat_activity row.
This should have been done from the start, but I (Andres) dropped the
ball there somehow.
Author: Craig Ringer, revised by me Discussion:
CAMsr+YFKgZca5_7_ouaMWxA5PneJC9LNViPzpDHusaPhU9pA7g@mail.gmail.com
|
|
Logical decoding set SnapshotData's regd_count field to avoid the
snapshot manager from prematurely freeing snapshots that are generated
by the decoding system. That was always an abuse of the field, as it was
never supposed to be used outside the snapshot manager. Commit 94028691
made snapshot manager's tracking of the snapshots smarter, and that scheme
fell apart. The snapshot manager got confused and hit the assertion, when
a snapshot that was marked with regd_count==1 was not found in the heap,
where the snapshot manager tracks registered the snapshots.
To fix, don't abuse the regd_count field like that. Logical decoding still
abuses the active_count field for similar purposes, but that's currently
harmless.
The assertion failure was first reported by Michael Paquier
|
|
Now that we use CRC-32C in WAL and the control file, the "traditional" and
"legacy" CRC-32 variants are not used in any frontend programs anymore.
Move the code for those back from src/common to src/backend/utils/hash.
Also move the slicing-by-8 implementation (back) to src/port. This is in
preparation for next patch that will add another implementation that uses
Intel SSE 4.2 instructions to calculate CRC-32C, where available.
|
|
David Rowley
|
|
Similarly to previous fix 9b8d478, commit 2c03216 has switched
XLogReaderAllocate() to use a set of palloc calls instead of malloc,
causing any callers of this function to fail with an error instead of
receiving a NULL pointer in case of out-of-memory error. Fix this by
using palloc_extended with MCXT_ALLOC_NO_OOM that will safely return
NULL in case of an OOM.
Michael Paquier, slightly modified by me.
|
|
|
|
Petr Jelinek
|
|
This improves on commit bbfd7edae5aa5ad5553d3c7e102f2e450d4380d4 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
|
|
It is only used in src/backend/replication/syncrep.c.
Back-patch to all supported branches except 9.1 which declares the
function as static.
|
|
Since 465883b0a two versions of commit records have existed. A compact
version that was used when no cache invalidations, smgr unlinks and
similar were needed, and a full version that could deal with all
that. Additionally the full version was embedded into twophase commit
records.
That resulted in a measurable reduction in the size of the logged WAL in
some workloads. But more recently additions like logical decoding, which
e.g. needs information about the database something was executed on,
made it applicable in fewer situations. The static split generally made
it hard to expand the commit record, because concerns over the size made
it hard to add anything to the compact version.
Additionally it's not particularly pretty to have twophase.c insert
RM_XACT records.
Rejigger things so that the commit and abort records only have one form
each, including the twophase equivalents. The presence of the various
optional (in the sense of not being in every record) pieces is indicated
by a bits in the 'xinfo' flag. That flag previously was not included in
compact commit records. To prevent an increase in size due to its
presence, it's only included if necessary; signalled by a bit in the
xl_info bits available for xact.c, similar to heapam.c's
XLOG_HEAP_OPMASK/XLOG_HEAP_INIT_PAGE.
Twophase commit/aborts are now the same as their normal
counterparts. The original transaction's xid is included in an optional
data field.
This means that commit records generally are smaller, except in the case
of a transaction with subtransactions, but no other special cases; the
increase there is four bytes, which seems acceptable given that the more
common case of not having subtransactions shrank. The savings are
especially measurable for twophase commits, which previously always used
the full version; but will in practice only infrequently have required
that.
The motivation for this work are not the space savings and and
deduplication though; it's that it makes it easier to extend commit
records with additional information. That's just a few lines of code
now; without impacting the common case where that information is not
needed.
Discussion: [email protected],
235610.92468.qm%40web29004.mail.ird.yahoo.com
Reviewed-By: Heikki Linnakangas, Simon Riggs
|
|
The message tries to tell the replication apply delay which fails if
the first WAL record is not applied yet. Fix is, instead of telling
overflowed minus numeric, showing "N/A" which indicates that the delay
data is not yet available. Problem reported by me and patch by
FabrÃzio de Royes Mello.
Back patched to 9.4, 9.3 and 9.2 stable branches (9.1 and 9.0 do not
have the debug message).
|
