# serializes consistent snapshots to the disk at LSNs where are before
# s0-transaction's commit. After s0-transaction commits, "s1_init" resumes but
# must not restore any serialized snapshots and will reach the consistent state
-# when decoding a RUNNING_XACT record generated after s0-transaction's commit.
+# when decoding a RUNNING_XACTS record generated after s0-transaction's commit.
# We check if the get_changes on 'slot1' will not return any s0-transaction's
# changes as its confirmed_flush_lsn will be after the s0-transaction's commit
# record.
it with <literal>pgstat_register_kind</literal> and a unique ID used to
store the entries related to this type of statistics:
<programlisting>
-extern PgStat_Kind pgstat_add_kind(PgStat_Kind kind,
- const PgStat_KindInfo *kind_info);
+extern PgStat_Kind pgstat_register_kind(PgStat_Kind kind,
+ const PgStat_KindInfo *kind_info);
</programlisting>
While developing a new extension, use
<literal>PGSTAT_KIND_EXPERIMENTAL</literal> for
}
/*
- * GUC check_hook for multixact_member_buffer
+ * GUC check_hook for multixact_member_buffers
*/
bool
check_multixact_member_buffers(int *newval, void **extra, GucSource source)
* command tag is left false in cmdtaglist.h. Otherwise, the change of
* completion tag output might break applications using it.
*
- * When called from CREATE MATERIALIZED VIEW comand, the rowcount is
+ * When called from CREATE MATERIALIZED VIEW command, the rowcount is
* displayed with the command tag CMDTAG_SELECT.
*/
if (qc)
*/
InvalidateCatalogSnapshot();
- /* Give up if there is still an active or registered sanpshot. */
+ /* Give up if there is still an active or registered snapshot. */
if (GetOldestSnapshot())
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
EEO_CASE(EEOP_PARAM_SET)
{
- /* out of line, unlikely to matter performancewise */
+ /* out of line, unlikely to matter performance-wise */
ExecEvalParamSet(state, op, econtext);
EEO_NEXT();
}
if (SOFT_ERROR_OCCURRED(&jsestate->escontext))
{
/*
- * jsestate->error or jsetate->empty being set means that the error
+ * jsestate->error or jsestate->empty being set means that the error
* occurred when coercing the JsonBehavior value. Throw the error in
* that case with the actual coercion error message shown in the
* DETAIL part.
BackgroundWorkerStopNotifications(bp->pid);
/*
- * If it was a background worker, also update its RegisteredWorker entry.
+ * If it was a background worker, also update its RegisteredBgWorker
+ * entry.
*/
if (bp->bkend_type == BACKEND_TYPE_BGWORKER)
{
* this flag is set. Note that we don't need to reset this variable as after
* promotion the slot sync worker won't be restarted because the pmState
* changes to PM_RUN from PM_HOT_STANDBY and we don't support demoting
- * primary without restarting the server. See MaybeStartSlotSyncWorker.
+ * primary without restarting the server. See LaunchMissingBackgroundProcesses.
*
* The 'syncing' flag is needed to prevent concurrent slot syncs to avoid slot
* overwrites.
queue_size = max_pinned_buffers + 1;
/*
- * Allocate the object, the buffers, the ios and per_data_data space in
+ * Allocate the object, the buffers, the ios and per_buffer_data space in
* one big chunk. Though we have queue_size buffers, we want to be able
* to assume that all the buffers for a single read are contiguous (i.e.
* don't wrap around halfway through), so we allow temporary overflows of
/*
* Compute init/max size to request for lock hashtables. Note these
- * calculations must agree with LockShmemSize!
+ * calculations must agree with LockManagerShmemSize!
*/
max_table_size = NLOCKENTS();
init_table_size = max_table_size / 2;
ctl.entrysize = sizeof(TypeCacheEntry);
/*
- * TypeEntry takes hash value from the system cache. For TypeCacheHash
- * we use the same hash in order to speedup search by hash value. This
- * is used by hash_seq_init_with_hash_value().
+ * TypeCacheEntry takes hash value from the system cache. For
+ * TypeCacheHash we use the same hash in order to speedup search by
+ * hash value. This is used by hash_seq_init_with_hash_value().
*/
ctl.hash = type_cache_syshash;
EOM
$node2->start();
-# Wait until recoveery pauses, then promote.
+# Wait until recovery pauses, then promote.
$node2->poll_query_until('postgres', "SELECT pg_get_wal_replay_pause_state() = 'paused';");
$node2->safe_psql('postgres', "SELECT pg_promote()");
EOM
# Now take an incremental backup. If WAL summarization didn't follow the
-# timeline cange correctly, something should break at this point.
+# timeline change correctly, something should break at this point.
my $backup2path = $node1->backup_dir . '/backup2';
$node2->command_ok(
[ 'pg_basebackup', '-D', $backup2path, '--no-sync', '-cfast',
{
/*
* Display the current chunk of results, unless the output
- * stream stopped working or we got cancelled. We skip use of
+ * stream stopped working or we got canceled. We skip use of
* PrintQueryResult and go directly to printQuery, so that we
* can pass the correct is_pager value and because we don't
* want PrintQueryStatus to happen yet. Above, we rejected
* taken here is less flexible, because a writer can only write to a file,
* while a compressor can write to a subsequent astreamer which is free
* to do whatever it likes. The reason it's like this is because this
- * code was adapated from old, less-modular pg_basebackup code that used
+ * code was adapted from old, less-modular pg_basebackup code that used
* the same APIs that astreamer_gzip_writer now uses, and it didn't seem
* necessary to change anything at the time.
*
ReadStreamBlockNumberCB callback,
void *callback_private_data,
size_t per_buffer_data_size);
-extern Buffer read_stream_next_buffer(ReadStream *stream, void **per_buffer_private);
extern void read_stream_reset(ReadStream *stream);
extern void read_stream_end(ReadStream *stream);
#define INJECTION_POINT_H
/*
- * Injections points require --enable-injection-points.
+ * Injection points require --enable-injection-points.
*/
#ifdef USE_INJECTION_POINTS
#define INJECTION_POINT_LOAD(name) InjectionPointLoad(name)
* Copy over option values from srcConn to dstConn
*
* Don't put anything cute here --- intelligence should be in
- * connectOptions2 ...
+ * pqConnectOptions2 ...
*
* Returns true on success. On failure, returns false and sets error message of
* dstConn.
my $offset = -s $node->logfile;
-# Role with pg_signal_autovacuum can terminate autovacuum worker.
+# Role with pg_signal_autovacuum_worker can terminate autovacuum worker.
my $terminate_with_pg_signal_av = $node->psql(
'postgres', qq(
SET ROLE regress_worker_role;
INSERT INTO tab_full VALUES (11);
PREPARE TRANSACTION 'test_prepared_tab_full';");
-# Confirm the ERROR is reported becasue max_prepared_transactions is zero
+# Confirm the ERROR is reported because max_prepared_transactions is zero
$node_subscriber->wait_for_log(
qr/ERROR: ( [A-Z0-9]+:)? prepared transactions are disabled/);
projects / postgresql.git / commitdiff