Note: this project is temporarily on hold because of a Docker bug.
Passenger-docker is a Docker image meant to serve as a good base for Ruby, Python, Node.js and Meteor web app images. In line with Phusion Passenger's goal, passenger-docker's goal is to make Docker image building for web apps much easier and faster.
Why is this image called "passenger"? It's to represent the ease: you just have to sit back and watch most of the heavy lifting being done for you. Passenger-docker is part of a larger and more ambitious project: to make web app deployment ridiculously simple, to heights never achieved before.
Relevant links: Github | Docker registry | Discussion forum | Twitter | Blog
Table of contents
- Why use passenger-docker?
- About passenger-docker
- Inspecting the image
- Using the image as base
- Administering the image's system
- Building the image yourself
- Conclusion
Why use passenger-docker instead of doing everything yourself in Dockerfile?
- Your Dockerfile can be smaller.
- It reduces the time needed to write a correct Dockerfile. You won't have to worry about the base system and the stack, you can focus on just your app.
- It sets up the base system correctly. It's very easy to get the base system wrong, but this image does everything correctly. Learn more.
- It drastically reduces the time needed to run
docker build, allowing you to iterate your Dockerfile more quickly. - It reduces download time during redeploys. Docker only needs to download the base image once: during the first deploy. On every subsequent deploys, only the changes you make on top of the base image are downloaded.
Passenger-docker is built on top of a solid base: baseimage-docker.
Basics (learn more at baseimage-docker):
- Ubuntu 12.04 LTS as base system.
- A correct init process (learn more).
- Fixes APT incompatibilities with Docker.
- syslog-ng.
- The cron daemon.
- The SSH server, so that you can easily login to your container to inspect or administer things.
- Password and challenge-response authentication are disabled by default. Only key authentication is allowed.
- It allows an predefined key by default to make debugging easy. You should replace this ASAP. See instructions.
- Runit for service supervision and management.
Language support:
- Ruby 1.8.7, 1.9.3, 2.0.0 and 2.1.0.
- 2.1.0 is configured as the default.
- Ruby is installed through the Brightbox APT repository. We're not using RVM!
- Python 2.7 and Python 3.0.
- Node.js 0.10, through Chris Lea's Node.js PPA.
- A build system, git, and development headers for many popular libraries, so that the most popular Ruby, Python and Node.js native extensions can be compiled without problems.
Web server and application server:
- Nginx 1.4. Disabled by default.
- Phusion Passenger 4. Disabled by default (because it starts along with Nginx).
- This is a fast and lightweight tool for simplifying web application integration into Nginx.
- It adds many production-grade features, such as process monitoring, administration and status inspection.
- It replaces (G)Unicorn, Thin, Puma, uWSGI.
- Node.js users: watch this 4 minute intro video to learn why it's cool and useful.
Auxiliary services and tools:
- Redis 2.6, through Rowan's Redis PPA. Disabed by default.
- Memcached. Disabled by default.
- Pups, a lightweight tool for bootstrapping images.
Passenger-docker is very lightweight on memory. In its default configuration, it only uses 10 MB of memory (the memory consumed by bash, runit, sshd, syslog-ng, etc).
Passenger-docker consists of several images, each one tailor made for a specific user group.
Ruby images
phusion/passenger-ruby18- Ruby 1.8.phusion/passenger-ruby19- Ruby 1.9.phusion/passenger-ruby20- Ruby 2.0.phusion/passenger-ruby21- Ruby 2.1.
Node.js and Meteor images
phusion/passenger-nodejs- Node.js 0.11.
Other images
phusion/passenger-full- Contains everything in the above images. Ruby, Python, Node.js, all in a single image for your convenience.phusion/passenger-customizable- Contains only the base system, as described in "What's included?". Ruby, Python and Node.js are not preinstalled. This image is meant to be further customized through your Dockerfile. For example, using this image you can create a custom image that contains only Ruby 2.0, Ruby 2.1 and Node.js.
In the rest of this document we're going to assume that the reader will be using phusion/passenger-full, unless otherwise stated. Simply substitute the name if you wish to use another image.
To look around in the image, run:
docker run -rm -t -i phusion/passenger-full bash -l
You don't have to download anything manually. The above command will automatically pull the passenger-docker image from the Docker registry.
There are several images, e.g. phusion/passenger-ruby21 and phusion/passenger-nodejs. Choose the one you want. See Image variants.
By default, it allows SSH access for the key in image/insecure_key. This makes it easy for you to login to the container, but you should replace this key as soon as possible.
So put the following in your Dockerfile:
# Use phusion/passenger-full as base image. To make your builds reproducible, make
# sure you lock down to a specific version, not to `latest`!
# See https://github.com/phusion/passenger-docker/blob/master/Changelog.md for
# a list of version numbers.
FROM phusion/passenger-full:<VERSION>
# Or, instead of the 'full' variant, use one of these:
#FROM phusion/passenger-ruby18:<VERSION>
#FROM phusion/passenger-ruby19:<VERSION>
#FROM phusion/passenger-ruby20:<VERSION>
#FROM phusion/passenger-ruby21:<VERSION>
#FROM phusion/passenger-nodejs:<VERSION>
#FROM phusion/passenger-customizable:<VERSION>
# Set correct environment variables.
ENV HOME /root
# Remove authentication rights for insecure_key.
RUN rm -f /root/.ssh/authorized_keys /home/*/.ssh/authorized_keys
# Use baseimage-docker's init process.
CMD ["/sbin/my_init"]
# If you're using the 'customizable' variant, you need to explicitly opt-in
# for features. Uncomment the features you want:
#
# Build system and git.
#/build/utilities.sh
# Ruby support.
#/build/ruby1.8.sh
#/build/ruby1.9.sh
#/build/ruby2.0.sh
#/build/ruby2.1.sh
# Common development headers necessary for many Ruby gems,
# e.g. libxml for Nokogiri.
#/build/devheaders.sh
# Python support.
#/build/python.sh
# Node.js and Meteor support.
#/build/nodejs.sh
# ...put your own build instructions here...
# Clean up APT when done.
RUN apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
The image has an app user with UID 9999 and home directory /home/app. Your application is supposed to run as this user. Even though Docker itself provides some isolation from the host OS, running applications without root privileges is good security practice.
Your application should be placed inside /home/app.
Enable Nginx and Passenger:
RUN rm -f /etc/service/nginx/down
You can add a virtual host entry (server block) by placing a file in the directory /etc/nginx/sites-enabled. You can modify Nginx http block settings by placing a file in the directory /etc/nginx/conf.d.
For example:
# webapp.conf:
server {
listen 80;
server_name www.webapp.com;
root /home/app/webapp/public;
# The following deploys your Ruby/Python/Node.js/Meteor app on Passenger.
# Not familiar with Passenger, and used (G)Unicorn/Thin/Puma/pure Node before?
# Yes, this is all you need to deploy on Passenger! All the reverse proxying,
# socket setup, process management, etc are all taken care automatically for
# you! Learn more at https://www.phusionpassenger.com/.
passenger_enabled on;
passenger_user app;
# If this is a Ruby app, specify a Ruby version:
passenger_ruby /usr/bin/ruby2.0;
# For Ruby 1.9.3 (you can ignore the "1.9.1" suffix)
#passenger_ruby /usr/bin/ruby1.9.1;
# For Ruby 1.8.7
#passenger_ruby /usr/bin/ruby1.8;
}
# Dockerfile:
ADD webapp.conf /etc/nginx/sites-enabled/webapp.conf
RUN mkdir /home/app/webapp
RUN ...commands to place your web app in /home/app/webapp...
Install and enable Redis:
# Opt-in for Redis if you're using the 'minimal' image.
#RUN /build/redis.sh
# Enable the Redis service.
RUN rm -f /etc/service/redis/down
The configuration file is in /etc/redis/redis.conf. Modify it as you see fit, but make sure daemonize no is set.
Install and enable memcached:
# Opt-in for Memcached if you're using the 'minimal' image.
#RUN /build/memcached.sh
# Enable the memcached service.
RUN rm -f /etc/service/memcached/down
The configuration file is in /etc/memcached.conf. Note that it does not follow the Debian/Ubuntu format, but our own, in order to make it work well with runit. The default contents are:
# These arguments are passed to the memcached daemon.
MEMCACHED_OPTS="-l 127.0.0.1"
You can add additional daemons to the image by creating runit entries. You only have to write a small shell script which runs your daemon, and runit will keep it up and running for you, restarting it when it crashes, etc.
The shell script must be called run, must be executable, and is to be placed in the directory /etc/service/<NAME>.
Here's an example showing you how to a memached server runit entry can be made.
### In memcached.sh (make sure this file is chmod +x):
#!/bin/sh
# `chpst` is part of running. `chpst -u memcache` runs the given command
# as the user `memcache`. If you omit this, the command will be run as root.
exec chpst -u memcache /usr/bin/memcached >>/var/log/memcached.log 2>&1
### In Dockerfile:
RUN mkdir /etc/service/memcached
ADD memcached.sh /etc/service/memcached/run
Note that the shell script must run the daemon without letting it daemonize/fork it. Usually, daemons provide a command line flag or a config file option for that.
Tip: If you're thinking about running your web app, consider deploying it on Passenger instead of on runit. Passenger relieves you from even having to write a shell script, and adds all sorts of useful production features like process scaling, introspection, etc. These are not available when you're only using runit.
The default Ruby (what the /usr/bin/ruby command executes) is the latest Ruby version that you've chosen to install. You can use ruby-switch to select a different version as default.
# Ruby 1.8.7
RUN ruby-switch --set 1.8
# Ruby 1.9.3 (you can ignore the "1.9.1" suffix)
RUN ruby-switch --set 1.9.1
# Ruby 2.0.0
RUN ruby-switch --set 2.0
# Ruby 2.1.0
RUN ruby-switch --set 2.1
passenger-docker uses the baseimage-docker init system, /sbin/my_init. This init system runs the following scripts during startup, in the following order:
- All executable scripts in
/etc/my_init.d, if this directory exists. The scripts are run during in lexicographic order. - The script
/etc/rc.local, if this file exists.
All scripts must exit correctly, e.g. with exit code 0. If any script exits with a non-zero exit code, the booting will fail.
The following example shows how you can add a startup script. This script simply logs the time of boot to the file /tmp/boottime.txt.
### In logtime.sh (make sure this file is chmod +x):
#!/bin/sh
date > /tmp/boottime.txt
### In Dockerfile:
RUN mkdir -p /etc/my_init.d
ADD logtime.sh /etc/my_init.d/logtime.sh
You can use SSH to administer any container that is based on passenger-docker.
Start a container based on passenger-docker (or a container based on an image based on passenger-docker):
docker run [options] phusion/passenger-full [more options]
Find out the ID of the container that you just ran:
docker ps
Once you have the ID, look for its IP address with:
docker inspect <ID> | grep IPAddress
Now SSH into the container. In this example we're using the default insecure key, but if you're followed the instructions well then you've already replaced that with your own key. You did replace the key, didn't you?
ssh -i insecure_key root@<IP address>
If you use Passenger to deploy your web app, run:
passenger-status
passenger-memory-stats
If anything goes wrong, consult the log files in /var/log. The following log files are especially important:
- /var/log/nginx/error.log
- /var/log/syslog
- Your app's log file in /home/app.
If for whatever reason you want to build the image yourself instead of downloading it from the Docker registry, follow these instructions.
Clone this repository:
git clone https://github.com/phusion/passenger-docker.git
cd passenger-docker
Start a virtual machine with Docker in it. You can use the Vagrantfile that we've already provided.
vagrant up
vagrant ssh
cd /vagrant
Build one of the images:
make build_ruby18
make build_ruby19
make build_ruby20
make build_ruby21
make build_nodejs
make build_customizable
make build_full
If you want to call the resulting image something else, pass the NAME variable, like this:
make build NAME=joe/passenger
- Using passenger-docker? Tweet about us or follow us on Twitter.
- Having problems? Please post a message at the discussion forum.
- Looking for a minimal image containing only a correct base system? Take a look at baseimage-docker.
Please enjoy passenger-docker, a product by Phusion. :-)