This repository was archived by the owner on Mar 2, 2023. It is now read-only.

Name		Name	Last commit message	Last commit date
parent directory ..
cmsis		cmsis
lufa		lufa
xmclib		xmclib
Makefile		Makefile
README.md		README.md
frozentest.mpy		frozentest.mpy
frozentest.py		frozentest.py
main.c		main.c
mpconfigport.h		mpconfigport.h
mphalport.h		mphalport.h
qstrdefsport.h		qstrdefsport.h
startup_XMC4700.S		startup_XMC4700.S
system_XMC4700.c		system_XMC4700.c
uart_core.c		uart_core.c
uart_extra.c		uart_extra.c
xmc4700.ld		xmc4700.ld

README.md

The XMC port

This is a MicroPython port that runs on the Infineon XMC4700 Relax Kit.

Building

$ make

Starting J-Link GDB Server

For the On-Chip Debugger you will need to install the J-Link Software and Documentation Pack. Connect USB cable to the debugger connection X101.

To start:

$ JLinkGDBServer -Device XMC4700-2048 -if SWD

Running

Once the J-Link GDB Server runs, you can load the code on the board and start the GDB session using:

$ make install