Leanpub Header

Skip to main content

Topics

Robotics

From kinematics, sensors and state estimation to ROS 2, simulation, humanoids in the workplace and robots modelled on animal brains, robotics as the Leanpub books about it set it out in their descriptions, contents and free samples.

Created from the free samples of 8 Leanpub books and the descriptions and tables of contents of 22 more, with every source cited.

Robotics is the design, construction and programming of machines that sense the world around them, decide what to do and then move. The three verbs organise the whole subject, and one reference work in the library is arranged around them, as a catalogue of the algorithms by which robots move, perceive and think.[19] Beneath the algorithms lies mathematics, the geometry of linked bodies and the statistics of uncertain measurement; around them lies engineering, of motors, sensors, software and safety; and beyond both lie the questions of what such machines are for and who pays for them.

The field has long been divided between the industrial robot, bolted down in a factory and repeating one motion, and the research robot, mobile and experimental. The present excitement is about a third kind. A manual on the deployment of humanoid robots opens by saying that they have crossed a threshold, from research platforms and staged demonstrations to machines expected to work for thousands of hours on live sites and to justify their cost.[2] Much of the library's shelf dates from 2026 and reflects that moment, with books on humanoids, on standards for building them and on the economics of owning one, beside older and smaller guides for people wiring their first sensor.

This article follows the subject through its mathematics and control, sensing and perception, software and simulation, humanoid robots, factories, drones and other special machines, robots modelled on animal brains, and robots in society. Its sources are the Leanpub books listed at the end. Free samples are uncommon on this shelf, and several of those that exist show only a preface and a table of contents, so most books are cited for what their public descriptions and contents say. Every claim that rests on a source is cited to it.

Where to start

A programmer with no hardware behind them can begin with Nodebots - Javascript and robotics in the real world (2020), which is for anyone taking first steps in driving a microcontroller board from JavaScript with simple, cheap sensors,[5] or with Using Sensors with the Raspberry Pi Pico (2023), which asks only a basic knowledge of C or Python.[6] Sensed: Accelerometers (2017) is a 26-page introduction to a single sensor.[9]

A student wanting the subject as a whole has Robotics and Automation (2026), a set of introductory notes for engineering students and for software developers moving towards hardware,[14] and Mathematics for Robotics (2025) for the mathematics on its own.[15]

The working engineer is served by A very informal journey through ROS 2 (2026), which is about design choices in ROS 2 and not about first steps,[1] and by Sensor Fusion Made Easy (2026), written for practising engineers and advanced developers.[11] Modern Robot Kinematics and the two volumes of experimental projects say of themselves that they are not for beginners.[18][20] Managers and operators are the readers of Humanoid Robot Deployment Volume One (2026), which assumes technical literacy and no more,[2] and Planet of the Robots (2026) is addressed to any reader at all.[3]

History

The word robot comes from a Czech play of 1920, and the first industrial robot went to work in a car factory in 1961. For half a century the commercial robot was an arm on a production line, while universities built the mobile and legged machines. Cheap sensors and microcontrollers in the 2000s, shared software such as the Robot Operating System, and then machine learning brought the two together, and the 2010s added the drone and the robotic vacuum cleaner to ordinary life.

The books touch this history at several points. Planet of the Robots traces the field from its origins in industrial automation before it turns to the future,[3] and Humanoid Robotics reviews the history and anatomy of the humanoid and draws lessons from industrial robots and from autonomous vehicles.[22] The guide to ROS 2 shows a generation change inside the software, treating some mechanisms once as they were in the first version of the system and again as they are in the second.[1] And the deployment manual dates the humanoid's passage from demonstration to work to the present, with more than a decade of prototypes behind it.[2]

Mathematics, kinematics and control

A robot arm is a chain of rigid links, and kinematics is the mathematics of where the end of the chain is when the joints are set, and of how to set the joints to put it somewhere. Modern Robot Kinematics (2026) develops this formally, from the transformations of rigid bodies and the standard convention for describing links, through forward and inverse kinematics, to the Jacobian that relates joint motion to motion of the hand and the singular configurations in which control is lost. It then applies the same treatment well beyond the serial arm: to parallel mechanisms such as platforms and cable-driven systems, to wheeled and legged machines, to continuum robots, and to vehicles in the air and under water.[18]

Mathematics for Robotics is broader and shallower, running from coordinate geometry and vector calculus to probability and control theory and pairing each topic with its use.[15] A two-volume textbook takes the classical sequence and adds to each step a variant from artificial intelligence. Its first volume covers transformations, kinematics, dynamics, control design, stability and path planning, with neural networks, fuzzy logic and genetic algorithms offered where the exact solution is too hard;[16] its second goes on to trajectory generation, machine learning, vision, mapping and the main kinds of robot.[17]

Control is the question of what commands to send. Model Predictive Control Made Easy (2026) introduces model predictive control, in which a controller repeatedly plans a short way ahead within stated limits, starting from the analogy of driving a car and going on to prediction models, horizons, the tuning of costs and the limits that keep real actuators safe.[12] For looking up a method by name there is Robotics Algorithms (2026), a reference in glossary form across planning, estimation, mapping, control, manipulation and multi-robot systems, whose description presents it as one of a line of editions crafted by AI.[19]

Sensing, estimation and perception

A robot knows the world only through sensors, and the first lesson is how little a sensor says. Sensed: Accelerometers teaches it with one device, using data recorded in simple experiments to show what an accelerometer measures, where its errors come from, how filtering helps, and why the common belief that it yields velocity and position is mistaken; its worked application is the calculation of tilt.[9] Using Sensors with the Raspberry Pi Pico generalises, explaining the ways in which sensors send data to a microcontroller and the strategies for getting readings that are reliable and timely, on one inexpensive board in three programming environments, with an overview of the analogue and digital interfaces and the serial buses before the individual sensors. Its author explains the workings of each sensor on the grounds that new ones appear daily and the principle is what transfers.[6]

Estimation is the art of combining such readings. Kalman Filters Made Easy (2026) starts from the sources of uncertainty, noise in the sensor, interference, jitter in timing and imperfection in the model, and explains why measurements alone cannot be trusted and models alone drift, which is the problem the Kalman filter solves.[10] Sensor Fusion Made Easy, by the same author, carries the idea to practice: filters built from first principles for linear systems, the extended and unscented forms for nonlinear ones, complementary filters for small processors, and the fusing of inertial units, satellite positioning, cameras and laser scanners.[11] Integrating Data Fusion and Cognitive Architectures is more ambitious, joining a long-established model of the levels of data fusion to the cognitive architectures of artificial intelligence, and mapping the result on to the nodes and messages of a ROS 2 system.[13]

Vision is the richest sense and has a literature of its own. Fundamentals of Computer Vision (2020), written as a companion to graduate courses, covers the classical methods, from the filtering of images through tracking, and says plainly that it leaves out deep learning, on the ground that the older ideas are still the backbone of perception problems that are not classification. Its chapter on tracking, which is in the sample, uses the same Kalman and particle filters as the books on estimation, applied to objects moving through a sequence of images.[7]

Software and simulation

Most robots today are programmed on ROS 2, a framework in which a robot's software is a set of communicating nodes. A very informal journey through ROS 2 is a guide to using it well, and its table of contents is a list of the decisions a team must make. It covers how to create nodes and when to compose them; callbacks and the executors that run them, with a section on avoiding multithreading and another on deterministic execution; and the three kinds of interface, with a section for each on when a topic, a service or an action is the right choice, and with the quality-of-service policies that must be compatible at both ends and the ways of sharing memory without copying messages. A chapter on organising tasks sets sequential code beside state machines, behaviour trees and planning frameworks and ends by asking which is right for a project; the chapter on controllers begins from what it calls their biggest enemy, delay, asks whether a given system needs deterministic timing at all, and then places the standard control framework beside the specialised ones for navigation and for manipulation; and the chapter on testing proceeds from unit tests through tests of components and of integration to tests in simulation and on hardware.[1]

Simulation is the subject of a two-volume work. Experimental Robotics Projects Volume One treats a simulator as a scientific instrument and not as a place for demonstrations: its projects, in estimation, planning, control, learning and multi-robot systems, are controlled experiments designed to detect drift, instability and divergence early.[20] Experimental Robotics Projects Volume Two turns to what it says most books avoid, interaction with people under uncertainty and manipulation in which the robot is in contact with things, and it compares the physics engines themselves, their solvers and their handling of contact, since a result that holds in one simulator may not hold in another.[21]

The discipline of software reaches the hobbyist too. Nodebots - Javascript and robotics in the real world, the shelf's most widely read book, spends much of its length on unit tests, coverage and continuous integration for small hardware projects, on the view that these practices are poorly demonstrated elsewhere on the subject.[5]

Humanoid robots

Five books concern the humanoid, and none is about how to build one. Humanoid Robot Deployment Volume One states its premise in its preface: putting humanoids to work is less a problem of robotics than of systems engineering, operations and the management of risk. Early failures, it says, have come from badly prepared sites, unrealistic choices of task, underestimated maintenance and incomplete integration, and not from weak algorithms. It promises clear distinctions between controlled, variable and unstructured environments, an honest account of what a humanoid can sustain in continuous operation and what it cannot, and failure treated with the same rigour as success. The book follows the life of a deployment, from the assessment of a site and the design of a pilot with criteria for going on or stopping, through integration with a company's other systems, to operations, maintenance and scaling, and it compares the pace of deployment in China with that in North America and Europe.[2]

Two books argue that the industry needs shared standards. Humanoid Robotics compares the humanoid to the personal computer before common standards opened its market, and proposes physical, electrical and software standards with an account of the economic, ethical and regulatory questions.[22] Modular Standardization for Robotics is the fuller reference, on mechanical couplers, power and signal interfaces, software interfaces, security, testing and certification, with lessons from computers, phones, cars and aircraft and a roadmap to 2035.[23]

Humanoid Robotics in China 2026 Edition is a catalogue of one country's industry, arranged by the cities in which it clusters, with profiles of companies, specifications of their robots and comparisons of actuators, sensors, batteries and control architectures; it goes on to deployments in logistics, retail, hospitality and the care of the elderly, and to a roadmap that runs to 2035.[24] And CASHBOT: If You Buy a Humanoid Robot, How Much Money Could You Make? (2026) asks the owner's question: if such a robot could be bought, could it earn its keep in a small business? Its first chapter insists that a machine earns money only when someone pays for its output, that the robot is a tool inside a business model and not the business, and that new technology invites inflated expectations of utilisation and price. The questions it would have an owner ask are how many paid hours a week the machine can really produce, how much supervision it needs, what will break, what insurance will cost and what margin is left afterwards, and its comparison is with equipment that small businesses already buy, the driver's car and the landscaper's mowers. The chapters that follow test one service after another, from moving help and cleaning to restocking and security rounds, against supervision, downtime and cost.[4]

Factories, drones and special machines

In industry the robot is one layer of a larger system. The two volumes of Robotic Factory Design design an automated factory from the layout and the selection of robots through motion control, industrial networks and the software that schedules production, with digital twins and machine vision,[25] and then, in Robotic Factory Design, through predictive maintenance, functional safety, cybersecurity, commissioning and the application of software delivery practices to automation code.[26]

Drone Development from Concept to Flight (2024) follows one kind of robot through its whole development, from the principles of flight and the design of propulsion, through assembly, wiring, firmware and ground control software, to a first flight and the analysis of its logs, and ends by building a survey drone with an hour's endurance, a range of ten kilometres and a live video feed.[27] At the other extreme of scale, Snow plow robot designs (2023) takes a single chore, the clearing of snow, and sketches six machines for it.[8]

Brains as blueprints

Three volumes by one author look to animals for the organisation of a robot's control. Insect Cognitive Architecture for Robotics goes from the biology of insects, their vision, smell, touch, learning and navigation, to implementation, taking particular structures of the insect brain as templates for architectures that are robust and economical with energy.[28] Reptilian Cognitive Architecture for Robotics makes the case for the reptile, for decision by instinct with minimal computation in robots meant for harsh and unpredictable places.[29] Mammalian Cognitive Architecture for Robotics takes the most elaborate model, pairing the layered cortex, memory, attention and emotion with counterparts in a machine, and includes case studies drawn from particular species, among them a model of tool use in chimpanzees and an architecture for maze navigation taken from rodents.[30] In all three, to judge by their contents, about half the chapters are biology.

Robots and society

Planet of the Robots is the shelf's speculative book. Its preface presents societies of robots as a hopeful prospect and not a dystopia, and poses its questions directly: what happens when machines are more capable and more collaborative than people, how their societies would reshape cities, industry and the settlement of space, and whether humans can coexist with machines that are no longer only tools. Its range, by its description and contents, is from the collective intelligence of swarms and the biological models for robot societies to robot cities, governance and a timeline that runs centuries ahead.[3] The books on standards raise the nearer questions of ethics and regulation,[22] and the deployment manual counts the transition of a workforce, safety, compliance and liability among the practical tasks of putting a robot on a site.[2] The soberest note is the economic one: the book on owning a robot warns that because a humanoid machine feels extraordinary, people will assume it deserves extraordinary economics, and that usually it will not.[4]

Sources

Every source is a Leanpub book. The note after each says which part of it was read; where no sample was available, only the public description and table of contents were used.

  1. 1.
    A very informal journey through ROS 2, Marco Matteo Bassa: patterns, anti-patterns, frameworks and best practices Free sample: the front matter and the detailed table of contents; no chapter text. 2026. Free sample: PDF
  2. 2.
    Humanoid Robot Deployment Volume One, gareth thomas: Scaling to Production Systems and Real World Environments Free sample: the preface and the opening of the table of contents. 2026. Free sample: PDF
  3. 3.
    Planet of the Robots, gareth thomas: The Emergence of a Robotic Civilization Free sample: the preface and the table of contents. 2026. Free sample: PDF
  4. 4.
    CASHBOT: If You Buy a Humanoid Robot, How Much Money Could You Make?, Finxter: The Small-Business Playbook for Tesla Optimus and the First Real Robot Service Businesses Free sample: the table of contents and the first chapter, on the robot as a small-business asset. 2026. Free sample: PDF
  5. 5.
    Nodebots - Javascript and robotics in the real world, Wilson Mendes Free sample: the introduction and a chapter on continuous integration. 2020. Free sample: PDF · EPUB
  6. 6.
    Using Sensors with the Raspberry Pi Pico, Daniel Quadros Free sample: the introduction and the opening chapters on sensors and interfaces. 2023. Free sample: PDF · EPUB
  7. 7.
    Fundamentals of Computer Vision, George K: A gentle, accessible introduction to foundational concepts in computer vision and computational perception. Free sample: the opening note and the table of contents. 2020. Free sample: PDF
  8. 8.
    Snow plow robot designs, Sergio Adrian Martin Free sample: a short personal introduction; the designs are known from the description. 2023. Free sample: PDF
  9. 9.
    Sensed: Accelerometers, Hamid Mokhtarzadeh: An Understanding for Farms, Phones, and Drones No sample: from the description and table of contents. 2017.
  10. 10.
    Kalman Filters Made Easy, Alex Morgan: A Practical, Intuitive Guide to Noise, Uncertainty, and Sensor Fusion for Engineers, Makers, and Robotics Developers No sample: from the description alone. 2026.
  11. 11.
    Sensor Fusion Made Easy, Alex Morgan : A Practical Engineer's Guide to Combining Sensors, Estimating State, and Building Reliable Fusion Pipelines No sample: from the description alone. 2026.
  12. 12.
    Model Predictive Control Made Easy, Alex Morgan: A Practical Guide to Models, Horizons, Constraints, and Real‑Time Optimization No sample: from the description alone. 2026.
  13. 13.
    Integrating Data Fusion and Cognitive Architectures, gareth thomas: Volume 1 Foundations and Mechanisms No sample: from the description and table of contents. 2026.
  14. 14.
    Robotics and Automation, Rahul Basu No sample: from the description alone. 2026.
  15. 15.
    Mathematics for Robotics, Satyam Mishra: Learn All the Math You Need to Excel in Robotics No sample: from the description alone. 2025.
  16. 16.
    Mathematical Modeling in Robotics and Artificial Intelligenc VOL-1, Anshuman Mishra No sample: from the description and table of contents. 2026.
  17. 17.
    Mathematical Modeling in Robotics and Artificial Intelligenc VOL-2, Anshuman Mishra No sample: from the description and table of contents. 2026.
  18. 18.
    Modern Robot Kinematics, gareth thomas: Serial Parallel, and Mobile Systems No sample: from the description and table of contents. 2026.
  19. 19.
    Robotics Algorithms, gareth thomas: Optimizing Motion Perception, and Control in Autonomous Systems No sample: from the description and table of contents. 2026.
  20. 20.
    Experimental Robotics Projects Volume One, gareth thomas: Simulation-Based Design Analysis, and Evaluation of Robotic Systems No sample: from the description and table of contents. 2026.
  21. 21.
    Experimental Robotics Projects Volume Two, gareth thomas: Interaction Embodiment, and Large-Scale Simulation Systems No sample: from the description and table of contents. 2026.
  22. 22.
    Humanoid Robotics, gareth thomas: Standards Innovation, and the Path to a Modular Future No sample: from the description and table of contents. 2026.
  23. 23.
    Modular Standardization for Robotics, gareth thomas: Mechanical Electrical, and Software Interoperability in Robotics No sample: from the description and table of contents. 2026.
  24. 24.
    Humanoid Robotics in China 2026 Edition, gareth thomas: A Complete Industry Catalog and Technical Atlas No sample: from the description and table of contents. 2026.
  25. 25.
    Robotic Factory Design, gareth thomas: Volume I Smart Factory Foundations: Factory Architecture Robotics, PLCs, Control Systems and Simulation No sample: from the description and table of contents. 2026.
  26. 26.
    Robotic Factory Design, gareth thomas: Volume II Smart Factory Applications: AI, IIoT, Safety, Cybersecurity, Commissioning and Case Studies No sample: from the description and table of contents. 2026.
  27. 27.
    Drone Development from Concept to Flight, Packt Publishing Ltd: Design, assemble, and discover the applications of unmanned aerial vehicles No sample: from the description and table of contents. 2024.
  28. 28.
    Insect Cognitive Architecture for Robotics, gareth thomas: Modeling Neural Circuits for Intelligent Machines No sample: from the description and table of contents. 2026.
  29. 29.
    Reptilian Cognitive Architecture for Robotics, gareth thomas: Modeling Primitive Neural Systems for Robust Autonomous Machines No sample: from the description and table of contents. 2026.
  30. 30.
    Mammalian Cognitive Architecture for Robotics, gareth thomas: Modeling Advanced Neural Systems for Sophisticated Autonomous Agents No sample: from the description and table of contents. 2026.

Further reading

Other books in the library on neighbouring ground, not cited above.

This is an article created from the free samples of 8 Leanpub books and the descriptions and tables of contents of 22 more. We're building these articles to provide you, the Leanpub reader, with a good jumping-off point to discover more Leanpub books that are interesting and relevant to you. We never use material which is paid-only when building these articles: we only use material which is already free on Leanpub. However, Leanpub authors can opt out from inclusion in articles from their book settings page.

Updated November 2026.

In the Leanpub store: 54 books in the Robotics category

All topics