Open Source Server Operating Systems IoT Software

MAX home automation is a GTK+ application to manage ELV/eQ-3 MAX! cubes. A cube is a gateway to a network of radiator thermostats, shutter contacts etc. Radiator and wall-mounted thermostat schedule can be edited uploaded, stored into a file and restored from there. Wall-mounted thermostat temperature graphs are indicated on a separate page sorted by the installation room. HTTP server is provided for integration with HTTP-enabled controls. E.g. thermostats can be queried and controlled remotely via HTTP GET-queries.

Firmware for hardware which may communicate with the "Brick Daemon" ( http://github.com/Tinkerforge/brickd )

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other boot crashes.

ACME client library for ESP32 Copyright © 2019, 2020, 2021, 2023, 2024 by Danny Backx ACME is a protocol (see https://tools.ietf.org/html/rfc8555 for automatic certificate management. Sites such as letsencrypt.org allow you to obtain free (no charge) certificates in an automated way using the ACME protocol. This library allows you to get certificates for IoT devices based on the ESP32. More info in https://sourceforge.net/p/esp32-acme-client/code/HEAD/tree/trunk/Readme.md. Specific configuration examples and technology overview is in https://sourceforge.net/p/esp32-acme-client/code/HEAD/tree/trunk/components/acmeclient/Configurations.md. You can get this component from Espressif's component registry ( https://components.espressif.com/components?q=dannybackx ). Put this component into your project with idf.py add-dependency dannybackx/acmeclient