PMU measurements from optimal/ sub optimal locations in IEEE 14 bus system
- Citation Author(s):
-
Aditya Mishra
(University of California San Diego)
Raymond de Callafon (University of California San Diego) - Submitted by:
- Aditya Mishra
- Date Created:
- Last updated:
- DOI:
- 10.21227/em4w-n470
- Data Format:
1956 views
Abstract
This dataset contains the following simulated information of the IEEE 14 bus system: The 24-hour load profile of all the nodes of the IEE 14 bus circuit, voltages and currents measured by the PMUs placed at optimal locations which minimizes the variance on the estimated voltage states, voltages and currents measured by the PMUs placed at sub-optimal locations.
Instructions:
.mat files contain the network information:
load_prof.mat - has the load profile of all buses for the IEEE 14 bus system
voltage_true.txt is the true voltage for buses 4,5,9,11
PMU measurements for sub optimal single channel PMU placement case
are given by:
Current: I_pmu_sub_opt - contains currents in "(2,3)","(3,4)","(6,12)","(7,8)","(10,11)","(13,14)",bus 1,bus 7
Voltage: V_pmu_sub_opt - contains currents in bus 1,bus 7,bus 2,bus 3,bus 6,bus 10,bus 13
PMU measurements for optimal single channel PMU placement case
are given by:
Current: I_pmu_opt - contains currents in "(3, 4)","(6, 5)","(8, 7)","(10, 11)","(12, 13)","(14, 9)",bus 1,bus 7
Voltage: V_pmu_opt - contains currents in bus 1,bus 3,bus 6,bus 8,bus 10,bus 12,bus 14
