0% found this document useful (0 votes)
33 views1 page

Structural Engineering Calculations

This document provides a worked example of verifying the resistance of a beam-column under combined axial load and bending. It calculates the minor axis bending resistance and uses equations from BS EN 1993-1-1 to check that the combined load satisfies requirements. Values are taken from tables in the standard. The calculations show the requirements are satisfied for the adopted cross section of 20.7 x 20.7 x 60 UKC.

Uploaded by

lyhalim
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views1 page

Structural Engineering Calculations

This document provides a worked example of verifying the resistance of a beam-column under combined axial load and bending. It calculates the minor axis bending resistance and uses equations from BS EN 1993-1-1 to check that the combined load satisfies requirements. Values are taken from tables in the standard. The calculations show the requirements are satisfied for the adopted cross section of 20.7 x 20.7 x 60 UKC.

Uploaded by

lyhalim
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

588

Worked example

Beam-column example 1

Sheet3of3

Rev

OK

BS EN
199.3- I - I
C16.3.1.1

OK

BS EN
1993-1-1
C1 6.3.I . I

Minor axis bending resistance

Combined axial load plus bending:


To verify resistance under combined axial loading plus bending, both Equations
6.61 and 6.62 of BS EN 199.7-1-1 must be satisfied. The major axis bending term is

absent in this example since M,,bd= 0.


Maximum (conservative) values o,f kiLmay be taken from Table 18.1, as
k,, = 0.6kzi. kzz= 2.4C,,,. For ty = 1, C,,z = 1.0 from Table B.3 of BS EN 1993-1-1.

BS EN
1993-1-1
Table B.3

.'.kzz=1.4C,,, =2.4 ~ 1 . =2.4;


0
k j Z=0.6k,, =0.6 ~ 2 . =1.44
4

...Nld+k,,Nil, RO

... &
Ni,zRij

M,

bd
I

RO

12
840 +1.44-=0.44+0.21=0.65<1.0
1892
83.9

+kz2- M 7bd = 840 + 2.4- 12 = 0.60 + 0.34 = 0.95 < 1.O


M c z ~ i j 1395
83.9
~

Adopt 20.7 x20.7 x60 UKC

:.OK

:. OK

BS EN
1993-1-1
Equation
6.61
BS EN
1993-1-1
Equation
6.62

You might also like