Security Level:
BTS3900 family
BTS3900 indoor BTS3900A outdoor
[Link]
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
BTS3900 indoor
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 2
BTS3900A Cabinet
The BTS3900A cabinet is designed in compliance with the IEC297 standard. It is a vertical cabinet and white in color.
Configuration Type
RF cabinet APM30 power distribution cabinet Cabinet base
Width Depth Height (mm) (mm) (mm)
600 600 600 480 480 480 700 700 200
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 3
BBU Hardware Structure
The typical power consumption of the BBU is 35 W. The weight of the BBU isnt more than 10KG. The BBU is a small box with all the external ports on the front panel. The BBU3900 boards consist of the BSBC, UEIU, GTMU, and UELP; the BBU3900 modules consist of the UBFA and the UPEU.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 4
BBU Cable connection
The BBU3900 cables are classified into the PGND cable, -48VDC power cable, E1/T1 cable, E1 transfer cable, environment monitoring signal cable, CPRI signal cable between the BBU and the RRU, and BBU monitoring signal cable. The cable connection relations of the BBU are as follows:
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 5
BBU Board--GTMU
The GSM transmission, timing, and management unit for BBU (GTMU) controls and manages the entire BTS. It provides interfaces related to the reference clock, power supply, OM, and external alarm collection.
The GTMU performs the following functions:
Controls, maintains, and operates the BTS. Supports fault management, configuration management, performance management, and security management. Supports the monitoring of the fan module and power supply module. Distributes and manages BTS3900 clock signals. Provides clock input for testing. Provides port for terminal maintenance. Supports four E1 inputs. Provides CPRI ports for communication with the RF modules .
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 6
BBU Board--GTMU
Ports on the Panel
Port CPRI0 CPRI5 ETH FE0 Type SFP connector Description Provides the input and output of optical and electrical transmission signals
RJ45 connector RJ45 connector
Local maintenance and commissioning A reserved port that performs the following function: Connects the BBU to a routing device in the equipment room through the Ethernet cable to transmit network information A reserved port that performs the following function: Connects the BBU to a routing device in the equipment room through the optical cable to transmit network information A reserved port that performs the following function: Automatically upgrades the software through the USB disk Testing of the output clock signals by using a tester Provides the input and output of the four E1/T1 signals between the GTMU and the UELP or between the GTMU and the BSC.
FE1
DLC connector
USB
USB connector
TST E1/T1
USB connector DB26 male connector
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
BBU Board--UELP
The universal E1/T1 lightning protection unit (UELP) provides lightning protection for four E1/T1 signals.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
Ports on the panel of the GRFU
Size397.25mmh70.62mmw305mmdWeight10Kg
Ports on the panel
Port Type Port for transceiving RF signals CPRI Label ANT_RXB ANT_TX/RXA CPRI0 SFP female connector Connecting to the BBU, or the upperlevel RFU during the cascading. Connecting to the lower-level RFU during the cascading. QMA female connector Input port of diversity signals in the antenna channel. Output port of diversity signals in the antenna channel. 3V3 power connector RJ45 connector Feeding power. RS485 Monitoringdebugging port. Connector Type DIN connector Description Connecting to the antenna subsystem.
CPRI1 Interconnection port for RF Receive signals RX_INB
RX_OUTA
Power supply port Monitoring port
PWR MON
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 9
Ports on the panel of the GRFU
Compare ports on the panel of GRFU with that of DRFU
Port Type Port for transceiving RF signals CPRI GRFU Relative position DRFU ANT1 ANT2 CPRI0 CPRI1 Rx_1 in Relative position upper lower upper lower
ANT_TX/RX lower A ANT_RXB CPRI0 CPRI1 upper lower upper upper
Interconnectio RX_INB n port for RF RX_OUTA Receive signals Monitoring port MON
Rx_1 out
lower Rx_2 in
Rx_2 out
existence nonexisten ce
Page 10
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
GRFU & DRFU
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 11
APM30 Battery Cabinet Hardware Component
The battery cabinet consists of :
Batteries in the APM30 Battery Cabinet Door Status Sensor Heating film
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
PDU Module
The PDU (short for Power Distribution Unit) performs AC or DC power distribution. The AC distribution functions of the PDU are as follows:
Supplies two AC power outputs with the maximum current of 10 A to the heaters of the power cabinet and the heating film of the battery cabinet. Reports the surge protection alarms of the AC input power .
The DC distribution functions of the PDU are as follows:
Provides 10 DC power outputs to meet the DC power requirements of t he distributed base station or the separated base station Reports the surge protection alarms of the DC output power
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 13
Batteries in the APM30 Battery Cabinet The battery cabinet supports two types of batteries, the -48 V 50 AH
and the -48 V 100 AH. The batteries can be grouped into the following combinations:
When the -48 V 50 AH batteries are configured, they can be expanded to -48 V
100 AH through connecting the upper and the lower battery groups in parallel.
When the -48 V 92 AH batteries are configured, they can be expanded to -48 V 184 AH through connecting the upper and the lower battery groups in parallel.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 14
Door Status Sensor
The APM30 power cabinet, APM30 battery cabinet, and APM30 transmission cabinet use the same type of door status sensor.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 15
Appearance and Panel of the EMUA
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 16
Transmission Interface Box
420 mm (L) 378 mm (W) 125 mm (H).
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 17
Internal Structure of Power Interface Box
The 110 V AC power interface box and the 220 V AC power interface box have the same components, but they are different in MCB specifications.
420 mm x 378 mm x 125 mm
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 18
Internal DDF
Twisted Pair DDF
The twisted pair DDF provides the access for eight twisted pair E1s. It is 1 U in height and does not provide the lightning protection function.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 19
Battery
The power cabinet can house 1 to 3 groups of -48 V 12 AH batteries, which can form the -48 V 12 AH battery group system, the 48 V 24 AH system, or the -48 V 36 AH system. The details are as follows:
The -48 V 12 AH or -48 V 24 AH battery group is installed in the 3 U space at the bottom, and the remaining 5 U space can be used to install the user devices. The -48 V 36 AH battery group is installed in the 6 U space at the bottom, and the remaining 2 U space can be used to install the user devices.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 20
Door Status Sensor
The door status sensor is made up of two parts, the magnet part and the switch part.
Sensors
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 21
Temperature Sensor
The temperature sensors of the APM30 consist of the air inlet temperature sensor, internal ambient temperature sensor, and the air outlet temperature sensor.
Sensors
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 22
Thank you
[Link]
