Scribd
Upload
205 views2 pages

Functional Reach Test Instructions

Functional Reach is a test of dynamic balance that measures how far a person can reach forward while standing with their back against a wall. The starting and ending positions are measured using a yardstick. Scores less than 6-7 inches indicate limited balance. Most healthy individuals can reach 10 inches or more. The Multidirectional Reach test also measures backward, sideways left and right reaches to assess balance in multiple directions. Reference values are provided for forward, backward, and side reaches based on a study of adults aged 74 on average.

Uploaded by

blitzkrieg5891
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
205 views2 pages

Functional Reach Test Instructions

Functional Reach is a test of dynamic balance that measures how far a person can reach forward while standing with their back against a wall. The starting and ending positions are measured using a yardstick. Scores less than 6-7 inches indicate limited balance. Most healthy individuals can reach 10 inches or more. The Multidirectional Reach test also measures backward, sideways left and right reaches to assess balance in multiple directions. Reference values are provided for forward, backward, and side reaches based on a study of adults aged 74 on average.

Uploaded by

blitzkrieg5891
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd

Functional Reach & Multidirectional Reach

Functional Reach is item #8 in the Berg Balance Scale Directions: Using a yardstick mounted on the wall at shoulder height, ask the subject to position themselves close to, but not touching the wall with their arm outstretched and hand fisted. Take note of the starting position by determining what number the MCP joints line up with on the yardstick. Have the subject reach as far forward as possible in a plane parallel with the measuring device. Instructions: Reach as far forward as you can without taking a step, keeping your feet flat on the floor, and keeping your hand at the level of the ruler. They are free to use various reaching strategies. Take note of the end position of the MCP joints against the ruler, and record the difference between the starting and ending position numbers. If they move their feet, that trial must be discarded and the trial repeated. Guard the subject as the task is performed to prevent a fall. Subjects are given two practice trials, and then their performance on an additional three trials is recorded and averaged. HINT: to prevent a starting position with the scapula protracted, have the person hold both arms out horizontally. If the fingers match, they are not protracting. Then lower the non-testing arm and begin the test.

Scores less than 6 or 7 inches indicate limited functional balance. Most health individuals with adequate functional balance can reach 10 inches or more.
Instructions to the patient: Please reach as far forward as you can without losing your balance. Keep your feet on the floor. You are not allowed to touch the wall or the ruler as you reach. You will have two practice trials and then I will record the distance that you reach forward. Criteria to stop the test: The patients feet lifted up from the floor or they fell forward. Most patients fall forward with this test. The therapist should guard from the front as that is the direction that you reach forward.
Duncan P, Weiner D, Chandler J, et al. Functional reach: a new clinical measure of balance. J of Gerontol 1990; 45: M192-197.

Multidirectional Reach
1. Forward (same as Functional Reach) 2. Backward: the starting position is the same as the Functional Reach. Keep the elbow extended and the arm reaching forward (along the yardstick), however the person leans backward as far as possible. 3. Sideway to the right: stand with back to wall, and right elbow extended with arm reaching along the level of the yardstick (without touching yardstick or the wall). Lean to the right as far as possible. 4. Sideways to the left. Reference Values: (mean age in study was 74) Forward 8.9 + 3.4 Backward 4.6 + 3.1 Right 6.2 + 3.0 Left 6.6 + 2.8 August 15, 2013

Newton R. (2001). Validity of the multidirectional reach test: A practical measure for limits of stability in older adults. J Gerontol Med Sci 56A: M248

August 15, 2013

You might also like