Scribd
Upload
6K views2 pages

Bases Detector NOTIFIER B501

B501 mounting bases provide a way to install NOTIFIER FlashScan(r) and CLIP addressable detectors in any application. Features Standard base Fits all addressable sensors. Colour coded terminals Tamper-proof lock. Multiple hole centres. Simple installation. Isolator base prevents an entire communications loop from being disabled when a short circuit occurs.

Uploaded by

Tai Kucing
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6K views2 pages

Bases Detector NOTIFIER B501

B501 mounting bases provide a way to install NOTIFIER FlashScan(r) and CLIP addressable detectors in any application. Features Standard base Fits all addressable sensors. Colour coded terminals Tamper-proof lock. Multiple hole centres. Simple installation. Isolator base prevents an entire communications loop from being disabled when a short circuit occurs.

Uploaded by

Tai Kucing
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • B501 Standard Base
  • B524IEFT Isolator Base

Mounting Bases

B501 Standard Base, B524IEFT Isolator Base


Intelligent/Addressable Devices

General
B501 mounting bases provide a way to install NOTIFIER FlashScan and CLIP addressable detectors in any application. Intelligent detectors can be mounted in either standard or isolator bases to meet specific requirements.

Features
Standard base Fits all addressable sensors. Colour coded terminals Tamper-proof lock. Multiple hole centres. Simple installation.

Approvals
Evaluated by CSIRO ActivFire as a compatible device for AFP-2800 (see afp-1459).

B501 Standard Plug-in Detector Base Specifications:


Diameter: Mounting: Temperature Range: Humidity Range: 104 mm 50 mm, 60 mm and 70 mm centres -20C to 66C 10% to 93% RH non-condensing

Page 1 of 2 DOC-02-030

B524IEFT Isolator Base General


Notifiers isolator base model B524IEFT is designed for use with the complete range of addressable analogue sensors. The isolator base prevents an entire communications loop from being disabled when a short circuit occurs. It achieves this by isolating the part of the loop containing the short circuit from the remainder of the circuit. The base will automatically restore the entire loop when the cause of the short circuit is corrected. Up to forty Flashscan detectors and/or twenty Flashscan modules may be installed between two isolator bases.

Features
Isolator base Fits all addressable sensors. Colour coded terminals Low current draw. Tamper-proof lock. Multiple hole centres. Simple installation.

Specifications
Operating Voltage: Standby Current: Operating Temperature Range: Operating Humidity Range: Diameter: 18 - 28.5VDC 100A -30C to 70C 0 to 95% Relative humidity (Non-condensing) 104 mm
2009 by Honeywell International Inc. All rights reserved. Unauthorised use of this document is strictly prohibited.

This document is not intended for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information contact your nearest Notifier Sales Office or Distributor www.notifier.com.au
Page 2 of 2 DOC-02-030

You might also like