APPENDIX C

BIBLIOGRAPHY AND LIST

OF CONTRIBUTORS
551
A-C Compressor Corporation, Appleton, Wisconsin
Ro-Flo Sliding Vane Compressor, Form 101.
Aerzen USA, Coatesville, Pennsylvania
Aerzen Environmental Technology, Form G1-003/01/EN.
The Compact II, Form 92-318.
Aerzen Process Gas Screw Compressors, Form 800/4.91.
Aerzen VMTS-type Air Screw Compressors, Form 1000/6.91.
Aerzen Rotary Screw Compressors, VMY-series, Form 300/1.94.
Aerzen Screw Compressor Package Series VML, Form 2000/8.88.
Aerzen VM 37-series Screw Compressors, Form 300/1.92.
Aerzen Screw Compressors, Form 1000/9/93.
Anglo Compression, Inc., Mount Vernon, Ohio
Modern High-Efficiency Compressor Valves, Bulletin 201.
High-Reliability Reciprocating Compressor Pistons, Form 401.
Customized Compressor Cylinder Design and Manufacture, Bulletin 321.
Ausdel Pty, Ltd., Cheltenham, Victoria, Australia
Hydroscav Gas Stripping Technology Bulletin, Form 234.
A Practical Guide to Compressor Technology, Second Edition, By Heinz P. Bloch
Copyright 2006 John Wiley & Sons, Inc.
[Link] 7/29/06 11:03 AM Page 551
Bently-Nevada Corporation, Minden, Nevada
TorXimitor

Torque Meters, Form AN-058.

BHS-Voith Getriebewerk G.m.b.H., Sonthofen, Germany
Gear Units, Form P 1/8-91.
Cooper Industries, Mount Vernon, Ohio
Compressor Systems for the Process, Petrochemical, and Production Industries, Form 9-206A.
Damped-Plate Compressor Valves, Form DPVB-681(A)-5MH.
EPV-750 High-Efficiency Poppet Valves, Form 1-205.
ESV-500 Compressor Valves, Form CCVB-979-10 MHG.
Penn Horizontal Balanced-Opposed Process Compressors, Form 9-201 A.
Reciprocating Gas Compression Systems for Enhanced Oil Recovery, Form EOR-0384-5MHOL.
Tandem/Truncated Cylinder Configurations, Form 9-204 A.
Compressor Controls Corporation, Des Moines, Iowa
Compressor Control and Surge Abatement Instruction Manual, Form IM30.
Compressor Control Strategies, installation and teaching aids.
Batson, Brett, Control System Objectives and Implementation, (special manuscript prepared for
inclusion in this text).
Coupling Corporation of America, Jacobus, Pennsylvania
Flexxor Coupling, Form 5M281.
Demag Delaval Turbomachinery, Trenton, New Jersey
MH/MV Centrifugal Compressors, Mannesmann Demag Verdichter Form MA 25.40 E/10.93.
Process Compressors, Mannesmann Demag Verdichter und Drucklufttechnik Form MA 10.15 en/4.89.
Centrifugal Compressors, Mannesmann Demag Verdichter und Drucklufttechnik Form MA 25.40
en/10.82.
Centrifugal Compressors for the Oil and Gas Industry, Mannesmann Demag Verdichter und
Drucklufttechnik Form 25.70/02.90 E.
Salisbury, Roy J., Lube, Seal and Control Oil Systems for Turbomachinery, customer training course
and technical manuscript.
Dresser Industries, Inc., Roots Division, Connersville, Indiana
Universal RAI Rotary Positive Displacement Blowers, Form B-5125.
Whispair Blowers, Form B-5219.
Dresser-Rand Company, Engine Process Compressor Division, Painted Post, New York
BDC Balanced-Opposed Compressors for Process Applications, Bulletin 3650.
Beyer, R. W., Reciprocating Compressor Performance and Sizing Fundamentals.
Gas Properties and Compressor Data, Form 3519-D.
552 APPENDIX C
[Link] 7/29/06 11:03 AM Page 552
HHE-FA/FB Balanced-Opposed Process Compressors, Form 85077.
HHE Heavy Duty Process Compressors, Form 85084.
HHE Heavy Duty Reciprocating Process Compressors, Form 3596.
Lentek, G. A., Reciprocating Compressors.
PHE Balanced-Opposed Process Compressors, Form 85068.
Schaad, R. G., Reciprocating Compressor Drive Systems.
, Reciprocating Process Compressor Designs and Applications.
TCV Engine Compressors, Form 85083.
Woollatt, D., H. Wertheimer, and R. Beyer, Design and Application of Compressor Valves for
Reliability and Efficiency.
Elliott Company, Jeannette, Pennsylvania
Elliott PAP-Plus Plant Air Package Compressor, Bulletin P-29.
Hallock, Donald C., Centrifugal Compressors and the Cause of the Curve, Elliott Reprint
93-476-MOY.
Quick Selection Methods for Elliott Multistage Compressors, Bulletin P25A.
Elliott Multistage Centrifugal Compressors, Bulletin P-25C.
Peter, Kenneth L., Applying Multiple Inlet Compressors, (also published in Hydrocarbon Processing,
May 1981).
Flexibox, Inc., Houston, Texas
Flexible Couplings, Engineering Catalog 100CC.
Indikon Division of Metravib Instruments, Cambridge, Massachusetts
Indikon Torquemeters and On-Stream Alignment Monitors, Form 484.
KMC Inc., West Greenwich, Rhode Island
Flexure Pivot Tilt Pad Bearings, Bulletin 101.
Thrust-Type Flexure Pivot Bearings, Bulletin 201.
Lincoln Division of McNeil Corporation, St. Louis, Missouri
Modular Lube Centralized Lubricating Systems, Form 440503.
Lubrication Systems Company, Houston, Texas
Customized Lube and Seal Oil Skids for Turbomachinery, Form 101.
Lubriquip, Inc., Cleveland, Ohio
Pump-To-Point Lubricators, Bulletins 10102, 51020, and 51040.
Lucas Aerospace Corporation, Bendix Fluid Power Division, Utica, New York
Bendix Contoured Diaphragm Coupling.
Bendix Flexible Diaphragm Couplings, Pub. No. 67U-6-717A/B.
Contoured Flexible Diaphragm Couplings, Pub. No. 67-U-9-7811-B.
BIBLIOGRAPHY AND LIST OF CONTRIBUTORS 553
[Link] 7/29/06 11:03 AM Page 553
Lucas Contoured Diaphragm Couplings, Pub. No. 67-U-6-919A.
Lucas Contoured Diaphragm Couplings, Pub. No. 67-U-6-8811A.
Nash Engineering Company, Norwalk, Connecticut
Liquid Ring Compressors For The Process Industries, Bulletins 819-A, 836-A, and 455-A.
Nuovo Pignone, Florence, Italy
Beni, P., and A. Traversari, Approaches to the Design of a Safe Secondary Compressor for High
Pressure Polyethylene Plants.
Agostini, M., and E. Giacomelli, Safety, Operation and Maintenance of LDPE Secondary
Compressors, Quaderni Pignone 52.
Tosi, G., A. Timori, and M. Stangarone, Rotordynamics in Centrifugal Compressors, Quaderni
Pignone 48.
PPI Division, The Duriron Company, Inc., Warminster, Pennsylvania
Metal Diaphragm Compressors, Bulletins PD-400C, HP-100, HP-400, and HP-410.
Pressurized Bearing Company, Minden, Nevada
Fluid-generated instabilities, sales literature.
RotordynamicsSeal Research, North Highlands, California
Honeycomb Labyrinth Seal Technology for Turbomachinery, Form 401.
Sulzer-Burckhardt Engineering Works, Ltd., Winterthur, Switzerland
Klaey, H., The Laby Compresses Gases Economically, Sulzer Technical Review, 3/1990.
Labyrinth Compressors, Bulletin [Link].
Matile, C., Industrial Reciprocating Compressors for Very High Pressures, Sulzer Technical Review,
2/1971.
Reciprocating Process Compressors, Bulletin [Link].
Sulzer Turbosystems International, Houston, Texas; New York, New York; and
Winterthur, Switzerland
Turbocompressors, Form STI 892/3M.
Sulzer Axial Compressors, Form 26.13.10.40Bhi 30.
Sulzer Isotherm Turbocompressors, Form 20.14.10.40Bid 50.
Sulzer Turbocompressors, Form 25.01.10.40Aid 15.
Buchel, A., Basic Design Features of Sulzer TurbocompressorsApplications in the Hydrocarbon
Processing Industries, Form e/27.13.10-Cgh.
Wachter, M., Some Special Design Aspects of Turbocompressors for the Oil, Gas and Petrochemical
Industry.
Sulzer Centrifugal Compressors, Form 27.20.10.40Chi 30.
554 APPENDIX C
[Link] 7/29/06 11:03 AM Page 554
Sulzer Centrifugal Barrel Compressors, Form 27.24.10.40Bhi 50.
Marriott, A., J. Ryrie, and D. Gilon, Mopico Compressor for Gas Pipeline Stations, Sulzer Technical
Review, 1/1991.
Marriott, A., and D. Gilon, Initial Experience With A New High-Speed, High-Pressure, Oil-Free
Motor Compressor Unit (HOFIM). Instit. of Mechanical Engineers, C449/038/93 (1995).
Torquetronics, Inc., Allegany, New York
Torquetronics Shaft Torque Monitoring Instrumentation, Form 345.
Revolve Technologies, Inc., Calgary, Alberta, Canada
Brallean, G. E., W. M. Grasdal, V. Kulle, C. P. Oleksuk, and R. A. Peterson, The Application of Active
Magnetic Bearings to a Power Turbine, ASME Paper 90-GT-199, 1990.
Eakins, P. S., and T. J. Al-Himyary, Dry Gas Seal and Magnetic Bearing Systems for Natural Gas
Pipeline Compressors, Nova Corporation, Calgary, Alberta, 1991.
Eakins, P. S., C. R. Feldmeyer, and A. G. St. Onge, Operating Experience with Active Magnetic
Bearings in a Power Turbine, Proceedings, CGA Symposium on Industrial Applications of Gas
Turbines, 1991.
Foster, E. G., V. Kulle, and R. A. Peterson, The Application of Active Magnetic Bearings to a Natural
Gas Pipeline Compressor, ASME Paper 86-GT-61, 1986.
Hesje, R. C., and R. A. Peterson, Mechanical Dry Seal Applied to Pipeline (Natural Gas) Centrifugal
Compressors, ASME Paper 84-GT-3, 1984.
Sears, J. E., and S. O. Uptigrove, Development and Operation of a Dual Hard Face Dry Gas Seal.
Proceedings, Revolve 89, 1989.
Zurn Industries, Inc., Erie, Pennsylvania
Ameriflex and Amerigear High Performance Couplings, Form 673ADV, 10/88.
Amerigear: Introduction, Design and Manufacturing, Form 462ADV, 8/81.
Ameriflex Flexible Diaphragm Coupling, Form No. 271-ADV, Rev. 4/74.
Individual Contributors
Bloch, H. P., and P. W. Noack, The Expanded Capabilities of Screw Compressors, Chemical
Engineering, Feb., 1992, pp. 100108.
Bloch, H. P., and P. W. Noack, Recent Experience With Large Liquid-Injected Rotary Screw Process
Gas Compressors, presented and published in the Proceedings of the 20th International
Turbomachinery Symposium, Texas A&M University, Dallas, Texas, 1991.
Calistrat, M., Flexible Couplings, ISBN 0-9643099-0-4, Caroline Publishing, P.O. Box 451611,
Houston, Texas 77245-1611.
Chow, R., B. McMordie, and R. Wiegand, Coatings Limit Compressor Fouling, Turbomachinery
International, Jan./Feb. 1995.
Godse, A., Predict Compressor Performance at New Conditions, Hydrocarbon Processing, June
1989, pp. 7779.
BIBLIOGRAPHY AND LIST OF CONTRIBUTORS 555
[Link] 7/29/06 11:03 AM Page 555