Siemens Ltd.

India
Industry Sector
Product Trainings
From To From To From To From To From To From To From To From To From To From To From To From To
SIMATIC S7-200 AS200 5 17,500
Simatic S7-1200 with Step-7 Basic AS120 3 10,500 03/10 05/10 6/2 8/2
TIA Basic with SIMATIC S7-300 & Step7 AS300 8 28,000 12/3 21/3
TIA Basic with Simatic S7-400 & Step 7 AS400 8 28,000
TIA Advanced with SIMATIC S7-300/400 AS410 6 21,000 10/10 15/10
Networking Course on PROFIBUS/PROFINET AS900 5 17,500
SIMATIC WinCC Basic AS600 6 21,000 17/10 22/10
SIMATIC WinCC Advanced AS 610 3 10,500 21/11 23/11 26/3 28/3
SIMATIC HMI Panels AS620 3 10,500
DCS: SIMATIC PCS 7 Basic AS700 10 35,000 03/10 13/10 31/10 11/11 28/11 9/12 2/1 13/1 13/2 24/2 5/3 16/3
DCS: SIMATIC PCS 7 Advanced AS710 10 35,000 14/11 25/11 16/1 28/1 19/3 30/3
Simatic Fail-safe (Distributed) course AS 800 3 10,500 5/12 7/12 6/3 8/3
Simatic Fail-safe (F-System) course AS 810 3 10,500 24/11 26/11 30/1 1/2
Simatic S5 (Excusivly on Demand) AS 500 4 14,000
Simatic S7 GRAPH Excusivly on Demand) AS 310 3 10,500
Simatic PCS-7 SERV (Troubleshooting/Maint) AS720 5 17,500
Simatic PCS-7 BATCH AS730 5 17,500
Simatic PCS-7 CEMAT AS740 5 17,500
TIA-PORTAL (Basic Course) AS 100 5 17,500 18/10 22/10
Basic course on AC/DC Drives DR100 5 17,500
Basic AC-Drives with MM4 Maintenance DR400 5 17,500
AC Drive: Masterdrives Vector Control DR210 6 21,000
Masterdrives MC DR220 6 21,000
SIMOTION - System and Programming DR110 8 28,000 10/10 19/10 31/10 09/11 19/12 28/12 9/1 18/1 6/2 17/2 12/3 21/3
SINAMICS S120 DRS20 6 21,000 03/10 08/10 20/2 25/2
SINAMICS G130 / G150 DR130 6 21,000 28/11 3/12 30/1 04/2
Drives for Crane Control Application DR300 5 17,500 14/11 18/11 23/1 28/1
DC Drive : SIMOREG DC Master 6RA70 DR700 6 21,000
DC Drive :SINAMICS DC Master 6RA80 DR 710 6 21,000
SINAMICS G120 DR G20 4 14,000
MV Drive - Perfect Harmony (at Siemens Nashik) DR1000 5 25,000
SINAMICS V50 DR 500 3 10,500 10/10 12/10 5/1 7/1 27/2 29/2
Combined course on AC/DC Operator DR800 6 21,000
Mobility-25KVA rail Coach Inverter MO100 3 10,500 6/2 8/2
LV Switchgear products & Maintenance CP100 4 14,000 18/10 21/10 29/11 2/12 10/1 13/1 14/2 17/2 28/2 2/3
LV Power Distribution Systems BT100 2 7,000 03/10 04/10 07/11 08/11 12/12 13/12 27/1 28/1 7/2 8/2 27/3 28/3
Communication Solution in Power Distribution BT150 2 7,000 8/12 10/12 29/3 30/3
SIRIUS Soft Starter CP200 2 7,000
SIMOCODE AC-Motor control CP400 2 7,000 31/10 01/11 19/12 20/12 6/1 7/1
Basic Automation for Switchgear User CP500 3 10,500 10/11 12/11 21/12 23/12 23/2 25/2
AC Motor Basics & Maintenance IM 100 3 10,500 14/12 16/12 2/2 4/2 15/3 17/3
JOINT SIMOCODE WITH ASI CP410 3 10,500 9/2 11/2
Energy Manegment Solutions BT200 2 7,000 20/2 21/2
Sentron Power Maneger BT250 3 10,500 03/1 4/1
SITRAIN (Kalwa)
Basic Course on Process Instrumentation PIA100 4 14,000 14/11 17/11 26/12 29/12 30/1 2/2 27/2 1/3 TRAINING CENTRE
Basic Course on Mechatronics (Siemens-Berlin Certification) MECH100 30 45,000 PHONE: 022 2762 3208/8087
Contact: Ms Avanti Satam
Note - 1) Training schedules & Courses Fees etc for all courses & batches listed above are subject to General Terms / conditions attached in this same file.
4) All above SIEMENS PRODUCT COURSES are mainly suitable for all our INDUSTRY-Customers.
7) Above COLLEGE COURSES are not standard available in our calendar, but batches could be arranged on case-to-case basis, to suit college-dates/timings
F-IA-CE-PT-000
Exclusively on demand & applications for batch-size of minimum 6- 8 participants only (at KW/ATC West)
Training Calendar at SITRAIN Training Centre
(TSDC, Siemens - Kalwa)
Training Programmes on LV Switchgear Products
Training Programmes on Drive Products
NOV FEB
Course
Code
JAN DEC
Course Fees
(Rupees)
inclusive of
Service Tax
(10.3%)
Training Calendar for Siemens Automation / Process-Instrumentation, AC/DC/Servo Drives, Machine-Tool Drives, LV Switchgear, AC Motors & Mobility (Partly) from Oct-11 to Mar-12
Exclusively on demand & applications for batch-size of minimum 6- 8 participants only (at KW/ATC West)
Exclusively on demand & applications for batch-size of minimum 6- 8 participants only (at KW/ATC West)
Training Programmes on Automation Products
MAR
Training Date
COURSE TITLE
(TRAINING PRODUCT)
Days
OCT
Exclusively on demand & applications for batch-size of minimum 6- 8 participants only (at KW/ATC West)
Exclusively on demand & applications for batch-size of minimum 6- 8 participants only (at KW/ATC West)
5) But we also have SPECIAL BASIC COURSES (Covering all areas above) but mainly suitable for COLLEGE-Customers.
6) COLLEGE-COURSES:(a) Basic-Automation (b) Basic-Drives (c.) Basic-LV-Switchgear (d) Basic-Process-Instrumentation (e) Basic AC-Motors & Maintenance
3) Few of the courses (especially courses with 8 days or 10 days) may have Sat/Sun closed.
2) HOLIDAYS within the course period will be informed to the participant along with the respective course confirmations.
OTHER Training Programmes
Siemens Ltd., 2012
Note-4: SIMATIC FAILSAFE Course Elgibility: All participants attending SIMATIC FAIL-SAFE
Trainings should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical
Engineering, with a fairly good background of BASIC PLC along with related programming
knowledge & experience on Step-7 Software.
Technical PRE-REQUISITES for SITRAIN Training courses
Note-1: PCS-7 DCS-Courses Elgibility: All participants attending PCS-7 Trainings should
necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering, with a
fairly good background of BASIC PLC along with related programming knowledge & experience on
Step-7 Software.
Note-2: SIMOTION Drives-Courses Elgibility: All participants attending SIMOTION Trainings
should necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering,
with a fairly good background of AC DRIVES. Knowledge & experience on SERVO Motors & Drives
will be an added advantage.
Note-3: SIMOCODE Course Elgibility: All participants attending SIMOCODE Trainings should
necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering, with a
fairly good background of BASIC SWITCHGEAR along with related knowledge on Electrical power.
Knowledge & experience on BASIC PLC will be an added advantage.
Note-0: ALL-Courses General Elgibility: All participants attending all SITRAIN Trainings should
necessarily be Diploma/Degree in Electronics or Instrumentation or Electrical Engineering OR
Equivalent. Additionally for few higher level courses like PCS-7,Simotion, Simocode etc, please
refer notes - 1,2,3,4 below.
Siemens Ltd., 2012
2>Registration-booking of seats for all clients at ALL Training Centres & Courses will continue to be made CENTRALLY at SITRAIN-KALWA by Email / Phone: +91 (022) 27623208 / 27628087.
(Contact Ms Avanti Satam) or through nearest Siemens Industry Sector Sales/Service office.
E-mail : [email protected], You may also contact nearest Siemens Regional Office-
Siemens Industry Sector Trainings (SITRAIN-India), General Notes & Commercial Terms
Note : Training Centre (SITRAIN-Siemens Kalwa), 6-ATCS (Authorised Training Centres) & 1-TSP (Training Service Provider) are all centrally coordinated, monitored & controlled by Siemens-Sitrain,
Kalwa. MCMT (Machine Tool Drives) Training at Bangalore/Pune & GTTC are controlled from Bangalore.
1>(a) All the Basic & Advanced courses will be conducted at Siemens Ltd., Kalwa Works, Thane-Belapur Road, Thane - 400 601 (Maharashtra).
(b) Only Basic courses, will be conducted, in our Authorized Training Centres (ATCs) i.e. ESSKAY-Navi-Mumbai ,Kolkata & Hyderabad, KARUNYA-Coimbatore, IATC- Panchkula, Artech Solutions-
Nagpur & Sharpline (Digha)
3>Course fee is to be paid in advance only on confirmation of seat, in the form of DD/Cheque drawn in favor of SIEMENS LTD & payable at Mumbai or location of our Regional Office
The course fee includes the course material, breakfast, lunch and tea. The training is non residential.
9>(a) Participants attending courses like TIA Advanced, WinCC, NET ,PCS 7 are recommended to attend TIA Basic with S7 300 before they come for these courses, or should have an equivalent knowledge /
experience on S7 - 300 & Step-7 Programming.
4>Since there are limited seats in each programme, seats are confirmed on 1st come 1st served basis. Course timings are from 8.30 AM to 5.00 PM.
5> (A) Every attempt will be made to conduct courses as announced. We shall do our best to send timely communication in such situations,if possible.
However we reserve the right to postpone or cancel the courses due to inadeqaute booking or circumstances beyond our control. We shall do our best to send timely communication in such
situations, if possible.
(B) Every attempt will also be made to accommodate the participants with SEATS at nearest (geographically) Siemens Training Centre in your area. This is valid for all parts of India including
North/South/East/West & Central India.
6>Kindly contact us for the course contents and information on prerequisite qualification / knowledge to attend the courses.
(Please refer the attached PRE-REQUISITE NOTE in this same calendar)
7>Please note that the course fee is inclusive of service tax at present applicable rate of 10.3 %. However any change in the service tax rate will be accordingly applied at actuals.
8>Please note that Rupees rates are applicable ONLY for Indian Nationals sponsored by INDIAN COMPANIES (Companies physically located in India).
3>It is recommended that you contact EKLAVYA-Bangalore for all the further detailed Techno-Commercial information on our MCMT-Drives Training at Bangalore & Pune.
11) Special Discounted Prices are available for College-Courses (But Subject to Training-Order of Minimum 50-60 Students in 1-Order)
STAY-HOTEL NOTES : For Kalwa & Navi-Mumbai, we have attached list of Hotels for your reference.
For Coimbatore, Hyderabad,Chandigarh, Kolkata, Bangalore ,Nagpur & Pune, please contact the respective Training Centres directly to get the Hotel-list from them.
For further details please mail to [email protected] . Alternatively your order can be sent to our Training Center via post courier.
GENERAL NOTES for MCMT Training Centres (Eklavya-Bangalore & Esskay-Pune)
Please Note :
1>The courses are conducted at Siemens Ltd., Eklavya Learning Center, 2nd Floor, Du parc Trinity (Next to Big Kids Kemp) No. 17, M.G. Road, Bangalore - 560001 (Karnataka).
2>Registration of seats for Training Courses can be made by fax or email . Phone: +91 (080) 6789 1665Fax: +91(080) 6789 1580 (Contact : Ms Vidya Balakrishna.)
For Foreign Nationals or Indian Nationals sponsored by FOREIGN COMPANIES rates will be in EURO. contact us for more details on the same
(b) Participants attending MASTERDRIVES MC or SIMOTION-D should have good knowledge about AC Drives (like Master Drives or Sinamics S120 or attended these courses).
(c) Participants attending DCS courses (PCS-7 Basic or Advance) should have good knowledge on PLCs preferrably Simatic S-7 PLCs & Step-7 Programming (or attended these courses).
10) All the transactions (mainly commercial) like Training Order, Payment should be done necessarily through your nearest Siemens Regional Office only. You may contact us here at Kalwa Training
Centre or Bangalore Training Centre directly, for respective general / technical information (for e.g. course content, address/location etc.)
Siemens Ltd., 2012
01.0CT.2011
1) Siemens Ltd. Registered & Corporate Office
Mumbai 130, Pandurang Budhkar Marg, Worli, Mumbai 400 018. +91 22 2498 7000 +91 22 2498 7500
TSDC, Kalwa Works,Thane Belapur Rd,Thane-400601
Phone -0091-22-2762 3208 (or) 2762 3566
Email : [email protected]
Navarangpura, Ahmedabad 380009.
+91 79 40207600 +91 79 40207699
Chandigarh 160 042.
+91 172 4690300 +91 172 4690399
P.O. Box 33 23, Chennai 600 034
+91 44 2833 4000/09 +91 44 2833 4011
Road, Ravipuram, Cochin 632 016.
+91 0484 4028622 / 11 +91 0484 2380201
Maruti Industrial Area, HUDA, Gurgaon 122 015.
+91 124 284 6000 +91 124 284 6024
J aipur 302 001.
+91 141 2370482 +91 141 2370482
18) Siemens Ltd. New Delhi: 4A, I.P Estate, Ring Road, New Delhi 110 002. +91 11 42995000, 23455000, 23314178
TSDC, Kalwa Works,Thane Belapur Rd,Thane-400601
Phone -0091-22-2762 3208 (or) 2762 3566
Email : [email protected]
4) Siemens Ltd. Bangalore: 3rd Floor, J yoti Mahal, No. 49, St. Marks Road, Bangalore 560 001. +91 80 22042000 +91 80 41120435
6) Siemens Ltd. Chandigarh: SCO 189/191, Sector 17C, Sector 34A, Guru Nanak Complex,
7) Siemens Ltd. Chennai: Sathak Centre, No. 4, Mahatma Gandhi Road, Nungambakkam,
Siemens in India Locations
2) Siemens Head Office Mr. Nilesh Sawant, Head
Ms. Avanti Satam, Coordinator
Ms. Shruti
SITRAIN-Kalwa Works
Thane-400 601, INDIA
3) Siemens Ltd. Ahmedabad: 3rd Floor, Prerna Arbour, Off C G Road, Girish Cold Drink Cross Road,
20) Siemens Ltd. Pune: Tower B/701-705, ICC Trade Tower, 403A, Senapati Bapat Road, Pune 411 016, Phone: 020-25706000/6060
12) Siemens Ltd. Jaipur: 6, Park Street, Opp. J aipur Coco Petrol Pump, M.I. Road,
13) Siemens Ltd. Kolkata: 43, Shanti Palli, Rashbihari, Bypass Connector, Kolkata 700 042. +91 33 2444 9000/09 +91 33 2444 9010
14) Siemens Ltd. Lucknow: 28/45, Ashok Marg, Lucknow 226 001. +91 522 4031000 +91 522 4031019
15) Siemens Ltd. Mumbai: 130, Pandurang Budhkar Marg, Worli, Mumbai 400 018. +91 22 2498 7000/05 +91 22 2498 7500
8) Siemens Ltd. Cochin: KG Oxford Business Centre, No.39/4609, 3rd floor, 3A, Sree Kandath
9) Siemens Ltd. Coimbatore: Global Towers, 7th Floor, 1057, Avinashi Road, Coimbatore 641 018. +91 422 4336300 / 335 +91 422 4336310
10) Siemens Ltd. Gurgaon: Software Development & Engineering Centre, Plot 6A, Sector 18,
11) Siemens Ltd. Hyderabad: 5-9-19, 4th & 5th Floor, Laxmi Narasinh Estate, Hyderabad 500 004. +91 40 2348 2500 +91 40 2324 3145
* By Client location we mean the Techno-commercial office of CLIENT, from where the Client's Training ORDER
& respective payment will be released
Siemens (IA-DT-BT/LV) Sales Offices
21 Siemens Ltd. Vadodara: Vanijya Bhavan, Race Course Road, Vadodara 390 007. +91 265 2330563 / 2325810, 0265-2340823
HEAD OFFICE Nilesh Sawant, Ms Avanti Satam
Ms. Shruti Kulawade SITRAIN-Kalwa Works
Thane-400 601, INDIA
16) Siemens Ltd. Nagpur: 5th Floor, Landmark Building, Ramdaspeth, Nagpur 440010. +91 712 6633000 +91 712 6633111
17) Siemens Ltd. Navi Mumbai: Plot 2, Sector 2, Kharghar Node, Navi Mumbai 410 210. +91 22 2756 8000/06 +91 22 2756 8018,
19) Siemens Ltd. Patna: 2nd Floor, D. Ram Plaza, Exhibition Road, Patna 800 001. +91 612 6450970 +91 612 2669534
Siemens Ltd., 2012
Region Address / Phone / Email Remarks (Client Locations) *
Technical Commercial
Area-wise distribution of clients for respective
Siemens-regional operations
NORTH Delhi Sanjeev Ghosh Ashish Koundal 4-A, Ring Road, I.P. Estate, New Delhi-110002 All Clients in the states of Delhi, UP, Uttaranchal
Vikas Gaur Phone : +91 (11) 42995317 Rajasthan, will be having this contact point
Email - [email protected]
SOUTH Chennai Prakash Hegde TK Vasudevan 5th Floor, Nungambakkam For all Clients in Tamilnadu state
144, Mahatma Gandhi Road, Chennai - 600034
Phone : +91 (44) 28334093
Email - [email protected]
Hyderabad Pradeep Singh Ms Aparna 5-9-19, Lakshmi Narasinh Estate, Opp. Secretariat, Saifabad For all Clients in Andhra Pradesh state
Secunderabad, Hyderabad - 500004
Phone : +91 (40) 23482513
Email - [email protected]
Bangalore K.Sahadevan Jayaraj Nadar 3rd Floor, Jyothi Mahal For all Clients in Karnataka state
49, St. Marks Road, Bnagalore - 560001
Phone : +91 (80) 22042053
Email - [email protected]
Coimbatore Mutthu Krishnan Madhav Bhave 7th Floor Global Tower,
1057 Avinashi Road, Coimbatore - 641018
Phone : +91 (422) 4336332
Email - [email protected]
EAST Calcutta Ghanta Basanta Soumik Mukherjee 43, Shantipalli, Eastern Metropolitan Bypass, For all Clients in the states of W.Bengal
R B connector, Calcutta - 700042 Orissa, Bihar, Assam, Meghalaya, Tripura,Jharkhand
Phone : +91 (33) 24449211 will be handled from here.
Email - [email protected]
WEST Mumbai Ameet Mehta Kavita Sharma 130, Pandurang Budhkar Marg, Worli For all Clients in Maharashtra (except Pune area) & Goa
KP Singh Phone : +91 (22) 27625403
Hemant Taralkar Email: [email protected]
Pune Ameet Mehta Jaywant Wagh 701 - 705 / Tower - B, ICC Trade Tower, For all Clients in Pune, Ahmednagar,Satara,Sangali,
Sandeep Pataskar 403 - A, Senapati Bapat Road, Pune - 411016 Sholapur,Kolhapur,Beed, Nanded.
Tel: 022 27625404
Email: [email protected]
Nagpur Ameet Mehta
Jaywant Wagh &
Kavita Sharma
16 Siemens Ltd. Nagpur 5th Floor, Landmark Building,
Ramdaspeth, Nagpur 440010.
Phone: +91 712 6633000
For all Clients in Maharashtra (Vidarbha area), & states of
Madhya Pradesh, Chattisgarh,
Ahemdabad Haresh Shah Prakash Patel 3rd Floor, Prerna Arbour, Near Girish Cold drinks,
Cross Roads, Off C. G. Road, Ahemdabad - 380009 For all Clients in Gujarat state
Phone : +91 (79) 40207410
Email - [email protected]
TSDC, Kalwa Works,Thane Belapur Rd,Thane-400601 For additional or general course-querries.
Phone -0091-22-2762 3208 (or) 2762 8087
Email : [email protected]
* By Client location we mean the Techno-commercial office of CLIENT, from where the Client's Training ORDER & respective payment will be released
HEAD OFFICE
SITRAIN-Kalwa Works
Nilesh Sawant (Head),
Ms. Avanti Satam (Coordinator),
Sandeep Barde, Ms Preeti Chandane
Shruti Kulawade (Commercial) Thane-400 601, INDIA
Siemens (A&D-Division) Contact Points for Customer Care (Training) in India
Customers/Participants should contact these Siemens offices, who will further co-ordinate customers training-requirement & inform our Main Training centre Sitrain (Kalwa, Near
Mumbai) accordingly.
Contact Person
For all Clients in the state of Kerala and city of Coimbatore
Located in City
Siemens Ltd., 2012
Siemens Ltd., 2012
Category
SGL DBL
Benzy Palace
Economic Room 18 2750 3300 Buffet Breakfast, Airport Transfer Check-in/ out 1200 noon
Economic Room 18 2750 3300 Buffet Breakfast, Airport Transfer Check-in/ out 1200 noon
Hotel Bandra Residency
Deluxe 2300 2300
Deluxe 2500 2500
Hotel Heritage Dakshin
Single 1200
Double 1500
Suite 1750
Hotel Sai Nidhi
Standard 1050 1190
Deluxe 1330 1330
Executive Deluxe 1540 1540
Standard 1200 1360
Deluxe 1520 1520
Executive Deluxe 1760 1760
Hotel South Coast
Standard 16 1200 1400 Buffet Breakfast 10
Standard 16 1500 1750 Buffet Breakfast 10
Venkat Presidency
Standard 1725 1950
Executive 2100 2325
Deluxe 2475
Presidency Suit 3600
Hotel Three Star
Deluxe 1760 2000 Buffet Breakfast 12 Check-in/ out 1200 noon
Deluxe 1760 2000 Buffet Breakfast 12 Check-in/ out 1200 noon
Hotel Royal, Sanpada
Deluxe 2400
Premium 3200
Remarks
AIRPORT AREA
Chain Hotel Name No:of Rooms
Rates
Inclusives
Taxes
in %
01 Oct 07-31 Dec 07
10
10
Vijaynagar, Marol Maroshi Rd, Andheri (E),
Mumbai- 400 059. Tel: 28279000-10, Fax:
28507909
3 01 Jan 08-30 Sep 08
Breakfast, Airport Pickup
01 Jan 08-31 Dec 08
01 Oct 07-31 Dec 07
Check-in/ out 1200 noon
Deluxe Suite
WESTERN SUBURBAN MUMBAI
I
n
d
e
p
e
n
d
e
n
t
3
Guru Nanak Road, Near Bandra Railway
Sattion, Bandra (W), Mumbai-400050
Ph:26425399/26456032 or 26456026
Fax:26400925
Panchsheel Plaza, Plot.No.36, Sector-5,
Airoli, Navi Mumbai-400708 Ph:27798383
NAVI MUMBAI
I
n
d
e
p
e
n
d
e
n
t
3
01 Jan 08-31 Dec 08
Sai Chambers, Sector11, Opp C.B.D Belapur
station (E), Navi Mumbai - 400 614 Ph:2756
0202 Fax:2756 0202
Buffet Breakfast 12
01 Oct 07-31 Dec 07
01 Jan 08-31 Dec 08
Breakfast 10
2000
10
01 Mar 08-31 Dec 08
1. Buffet Breakfast 2. Dinner
worth Rs.50/-
10
List of hotels near SITRAIN-Kalwa at Navi Mumbai & Thane
1. Buffet Breakfast 2. Dinner
worth Rs.50/-
Location wise
prefered Hotels
01 May 08 - 31 Dec 08
I
n
d
e
p
e
n
d
e
n
t
I
n
d
e
p
e
n
d
e
n
t
01 Oct 07-31 Dec 07
RX 31, MIDC, Thane Belapur Road,
Opp.Rabale Railway Station, Navi Mumbai-
400701 Ph:27696000 Fax:27698181
Note:
Rates above are indicative only & hence request you to contact the Hotels directly for LATEST detailed informations & confimed bookings.
10
I
n
d
e
p
e
n
d
e
n
t
3 Buffet Breakfast
Plot.No-4, Sector-23, Opp Sanpada Railway
Station,Mumbai-Pune Highway, Navi Mumbai
Ph:65101254 or 27834863 Fax:27617804
18 Mar 08-30 Sep 08
I
n
d
e
p
e
n
d
e
n
t
3
01 Oct 07-31 Dec 07
Hiranandani Crystal Plaza, Sector-7,
Kharghar, Navi Mumbai-410210
Ph:27561144 Fax:2756221
01 Jan 08-31 Dec 08
Plot No. 29, Sector 6A, Next to M.G. M.
Hospital, Kamothe, Navi Mumbai - 410 209.
Ph: 27424848/2266
Fax: 27425544
I
n
d
e
p
e
n
d
e
n
t
3
Siemens Ltd., 2012
1) SITRAIN INDIA 2) ATC - SOUTH 1
Siemens Training Centre Karunya University
TSDC, Kalwa Works, Karunya Nagar
Thane-Belapur Road Coimbatore-641114
Thane-400601 Contact: Mr. V. J egathesan
Contact: Ms. Avanti Satam Phone: 0422-2614318
Phone: 022 27623208/8087 Email: [email protected]
Email: [email protected]
3) ATC-WEST 4) ATC-NORTH
Esskay Services Industrial Automation Training Centre
Block No-801-802, B Wing 178, Phase II,
Techno City Plot No. X-4/1 & X-4/2 Industrial Area, Panchakula-134113
TTC Inductrial Area, Mahape Haryana (India)
Navi Mumbai-460710 Contact : Ms. J yoti Bharti
Contact: Ms. Bharati Tel: 0172-5044417
Phone: 022-27882881 Email: [email protected]
Email: [email protected]
5) ATC-EAST 6) ATC-CENTRAL
Esskay Services Artech Solutions
G-09, Matrix Tower, Plot#24, Block DN Raj Sahaydri,
Sector-5, Salt Lake City Hingna T-Point
Kolkata-700091 NAGPUR - 440032
Contact: Ms. Minakshi Contact no - 09303324463
Phone: 033-40044078 Email - [email protected]
Email: [email protected]
7)Christiani Sharpline
Technical Training ( P ) Ltd. 8) Siemens Machine Tools Drives Training
Plot No. 19 Eklavya Learning Centre
TTC Industrial Area 2nd Floor, Du Parc Trinity (Next to Big-Kids Kemp
Vishnu Nagar, Digha, No-17, M.G. Road, Bangalore-560001
Navi Mumbai - 400708 Tel: 080 67891665
Contact Person: Ms. Sarita Contact: Ms. Vidya Balakrishna
Tel: 022- 39154101/105 Email: [email protected]
9) ATC - SOUTH 2
Esskay Technologies
9-10-13, 2nd Floor
Siddam ShettyComplex, Above Canara Bank
Opposite Raymond Showroom, Parklane
Secunderabad-500003
Ms. Amrita
Ph:-04027846111/66901149
Email:[email protected]
LIST OF SITRAIN - INDIA TRAINING CENTERS
(including Authorized Training Centers, ATCs)
Siemens Ltd., 2012