Scribd
Upload
338 views2 pages

Dry Type Transformer Test Report

1. A dry type transformer test report for a 1 unit excitation transformer installed in the #1 turbine house floor at 0.00m. 2. Measurements showed insulation resistance, absorption ratio, and polarity were within acceptable limits. Winding resistances and voltage ratios also complied with standards. 3. The transformer passed the 1 minute AC withstand voltage test with insulation resistances remaining above minimums.

Uploaded by

Erwin Sambas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
338 views2 pages

Dry Type Transformer Test Report

1. A dry type transformer test report for a 1 unit excitation transformer installed in the #1 turbine house floor at 0.00m. 2. Measurements showed insulation resistance, absorption ratio, and polarity were within acceptable limits. Winding resistances and voltage ratios also complied with standards. 3. The transformer passed the 1 minute AC withstand voltage test with insulation resistances remaining above minimums.

Uploaded by

Erwin Sambas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

DRY TYPE TRANSFORMER TEST REPORT

Usage purpose #1 unit excitation transformer Installation location #1 turbine house 0.00m floor
[Link]:
Type Rated capacity
Rated voltage Rated current
Phases re!uency
"onnection #ymbol $anufacture date
#eries %o. &eight
$anufacturer
2. Measurement of Insulation Resistane! A"sorption Ratio! Polarit# in$e%:
&inding '()*( + , *()'( +, "ore), bolt through the core
Insulation resistance
-$./
R10
R10
R100
2pplied instrument3
&. Measurement of 'in$in( D) Resistane:
&indings 4" Resistance of &indingsm.
U)))( ()))& &)))U u)))x v)))y 5)))6
'( 5inding
*( 5inding
2pplied instrument3
*.+olta(e Ratio De,iation: "onnection #ymbol3
Tapping
position
(oltage Ratio Ratio 7(oltage Ratio 4eviation-8/
U)(7u)v ()&7v)5 &)U75)u
1 99.99
9 11.11:
2pplied instrument3
-. A) '[Link]$ Test:
&inding Test voltage;( Time-min/ Insulation resistance$.
<efore test 2fter test
'()*( +, =>
*()'( +, 9.0
2pplied instrument3
/.Test )onlusion:
Aepte$ Aepte$ 0it. note Not aepte$
Tested 4ate Temperature
Page 1 of 2
4ate3
Tested <y3
[Link]<2 ?2@2 ,%AI%,,RI%A
4ate3
2pproved <y3
"%TI"
4ate3
&itnessed <y3
P*% 7 ?$B
Page 2 of 2

You might also like