Scribd
Upload
717 views1 page

Structural Design Report

This document outlines the required format and contents for a structural design report to be submitted by an engineer to an accredited checker. The report should include: 1. A title page with project name, client information, engineer details, and approval authority. 2. Design details such as foundation type, material grades, loads, codes used, and software. 3. Calculations to establish the form and size of principal structural elements for both superstructure and substructure.

Uploaded by

Jose Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
717 views1 page

Structural Design Report

This document outlines the required format and contents for a structural design report to be submitted by an engineer to an accredited checker. The report should include: 1. A title page with project name, client information, engineer details, and approval authority. 2. Design details such as foundation type, material grades, loads, codes used, and software. 3. Calculations to establish the form and size of principal structural elements for both superstructure and substructure.

Uploaded by

Jose Manuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Engineering Details: Lists the components of the engineering report including design philosophy, calculations, design loads, and compliance with standards.
  • Title Page Information: Details the necessary elements for the structural design report cover sheet, such as project name, client's address, and professional affiliations.

Rev. No.

: 0
Date
: 28.6.2004

BEM/Form/AC/02

FORMAT FOR THE STRUCTURAL DESIGN REPORT


(To be prepared by the Submitting Engineer for submission to the Accredited Checker)

1.

The title page should contain the following information:


Name of the Project:
Name of the Client:
Address of the Client
Name and Address of the Submitting Engineer:
BEM Registration No. of the Submitting Engineer:
Approving Authority and its Address:
Approved Building Plan Approval No.
Date on which construction work is due to commence:

2.

The design report should include but not limited to the following information:
a. Clear indication of the functional frame, load transfer and stability aspects of the
structural scheme.
b. Typical design data such as:
i)
Type of foundation structure
ii)
Concrete grades for the various structural elements
iii)
Design stresses for the materials used for construction, i.e. concrete and
reinforcement bars
iv)
Imposed dead loads and live loads for the various structural elements
v)
Design wind speed
vi)
Minimum design lateral load due to wind load and notional load
vii)
Design codes of practices, standards and references used for the
analysis and design
viii)
Engineering soft wares used for the analysis and design

c.

Sufficient design calculations to establish the form and size of all the principal
structural element, both for the superstructure and substructure.

d. Sufficient design calculations for the stability analysis and elemental design for the
stabilizing frames and walls for the superstructure.
e. General arrangement plans, sections to show the dimensions, layout and the
disposition of the structural elements with reinforcements details.
f.

Complete structural details for temporary works with precautionary measures taken
to avoid damages to adjacent properties

g. Construction sequence for the structural works


h. Specifications of the materials.

Page 1 of 1

You might also like