Scribd
Upload
144 views2 pages

Asmp

The document outlines the syllabus for an Aircraft Science and Manufacturing Processes course. It is divided into 8 modules that cover topics such as principles of flight, aircraft structures, fabrication of wood and fabric aircraft components, sheet metal construction, welded structures, aircraft painting and marking. The modules range in weightage from 8% to 24%. References for three textbooks on aircraft maintenance, flight introduction, and flight without formula are also provided.

Uploaded by

api-296698256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
144 views2 pages

Asmp

The document outlines the syllabus for an Aircraft Science and Manufacturing Processes course. It is divided into 8 modules that cover topics such as principles of flight, aircraft structures, fabrication of wood and fabric aircraft components, sheet metal construction, welded structures, aircraft painting and marking. The modules range in weightage from 8% to 24%. References for three textbooks on aircraft maintenance, flight introduction, and flight without formula are also provided.

Uploaded by

api-296698256
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Aircraft Science and Manufacturing Processes (2130106)

Aircraft Science and Manufacturing


Processes (2130106) - Syllabus
Topics

Module
Weightage

Introduction of principles of flights:


Principles of generation of lift, Nomenclature of aerofoil, Four forces
acting upon an aircraft, three axes of manoeuvring, primary control
surfaces- Elevator, Aileron, stabilators and rudder. Secondary control
surfaces-Trim Tabs, Flaps, Spoilers, Air-Brakes, Slats-Slots.

08

Aircraft Structures:
Introduction, Aircraft Structural Design, Principal Aircraft Structures,
Aircraft Station numbers, Zoning, Nomenclature and Definition- Aileron,
Fuselages, General Construction of fuselages, Cockpits, Cabins and
Compartments, Wings, Tail and Control Surfaces, Landing Gear, Power
plant structures, Rotorcraft Structures.

16

Fabrication and Repair of Wood Aircraft Structures:


Introduction, Aircraft woods, Glues and Gluing procedures, Construction
and repairs of wood structures, Care of aircraft with wood structures,
Inspection of airplanes having wood structures.

16

Fabric Covering:
Introduction, Fabric types and terminology, Dopes and Finishing
Materials, Facilities and Equipment for Aircraft Covering, Selection for
Fabric covering material, Application of Fabric covers for Aircraft, Fabric
Inspection, Repair of Fabric Covering

16

Sheet Metal Airframe Construction:


Introduction, Design Philosophy, Factors affecting sheet metal parts and
joints design, Fundamentals calculations for structures, Preparation for
layout work, Hand tools for sheet metal work, Floor and Bench machinery
for sheet metal work, Fabrication for sheet metal parts, Riveting.

[Link]

24

Aircraft Science and Manufacturing Processes (2130106)

Welded Aircraft Structures and Construction:


Introduction, Construction of steel-tube assemblies by welding,
Inspections of steel tube structures, Aircraft tubing repair, Special welding
repairs, soldering and brazing.

14

Aircraft Painting and Marking:


Introduction, Aircraft finishing materials, Spray paint equipments,
Finishing metal aircraft and parts, Registration marks for aircraft.

08

Books:
Title
Aircraft Maintenance and Repair
Introduction to Flight
Flight without Formula

[Link]

Author
Watkins, Delp
John D. Anderson
A. C. Kermode

Publisher
TATA McGraw
TATA McGraw
Prentice Hall Press

You might also like