Scribd
Upload
830 views1 page

E295GC Steel Properties and Standards

This document provides information on the chemical composition and mechanical features of non-alloy steel for structural purposes according to EN 10277-2. The chemical composition limits for elements like carbon, silicon, manganese, phosphorus, sulfur and nitrogen are specified. Minimum mechanical property requirements like hardness, tensile strength and elongation at break are defined based on steel thickness. The steel has weldability but no technical data is provided if chemical composition prescriptions are not met. Corresponding standards from other sources are also listed for reference purposes.

Uploaded by

mauel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
830 views1 page

E295GC Steel Properties and Standards

This document provides information on the chemical composition and mechanical features of non-alloy steel for structural purposes according to EN 10277-2. The chemical composition limits for elements like carbon, silicon, manganese, phosphorus, sulfur and nitrogen are specified. Minimum mechanical property requirements like hardness, tensile strength and elongation at break are defined based on steel thickness. The steel has weldability but no technical data is provided if chemical composition prescriptions are not met. Corresponding standards from other sources are also listed for reference purposes.

Uploaded by

mauel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • E295GC Steel Composition: Details the chemical and mechanical properties of E295GC steel, including its composition and mechanical features, which comply with EN standards.

E295GC

(W. NR. 1.0533)

Non-alloy steel for structural purposes

CHEMICAL COMPOSITION: (heat analysis according to the EN 10277-2 standard)

C%

Si %

Mn %

P%

S%

N%

Cu %

FROM

TO

0,045

0,045

0,012

*MECHANICAL FEATURES: (according to the EN 10277-2 standard)

Thickness
mm

Rolled + peeled rolled


(+SH )
hardness HB

510
>1016
>1640
>4063
>63100

140 - 181
140 - 181
140 - 181

Rm (MPa)

470 - 610
470 - 610
470 - 610

Cold drawn
( +C )
Rp0,2 minimum
values
(MPa)
510
420
320
300
255

Rm (MPa)
650 - 950
600 - 900
550 - 850
520 - 770
470 - 740

A5 %
minimum
values
6
7
8
9
9

* Delivery condition: as rolled.


PROPERTIES:

Weldability:
Failing any prescriptions concerning chemical composition, no technical data about this steel
weldability are available.

Notes:

CORRESPONDENCE WITH OTHER STANDARDS ( purely as an indication ) :

EN 10025-2:2004
E295

EN 10025:90
Fe 490-2

UNI 7070
Fe 490

DIN 17 100
St 50-2

NF A35-501
A 50-2

You might also like