Overview
Operation Guide
Appendix
RBT Ring Back Tone Service
Acceptance Manual
V5.0Da06SP02
Huawei Website: Email:
[Link] support@[Link]
Technologies Co.,
Telephone: Fax:
Ltd.
80083021180755-28560000 0755-28560111
All Rights Address: Postal Code:
Administration Building, Huawei Technologies Co., Ltd., 518129
Reserved
Bantian, Longgang District, Shenzhen, P. R. China
Version:
02 (2007-06-29)
Huawei Technologies Proprietary
Acceptance Manual Part I Overview
RBT Ring Back Tone Service
Part I Overview
1Groundings for Acceptance
This manual is based on ITU-T Recommendation, IETF standards, and the
characteristics of the Ring Back Tone (RBT) service developed by Huawei.
On finishing equipment installation and debugging, an acceptance group, which
consists of the customer and installation staff, shall carry out acceptance tests to the
equipment, ensuring that it has reached the required indexes of the customer.
2Architectural Description
The manual applies to RBT V5.0Da06SP02
This manual consists of three parts:
(1) Part I Overview introduces the groundings for acceptance, content of
the manual, numbering specifications for acceptance items, and other matters
needing attention.
(2) Part II Operation Guide details the testing procedures of all items,
and serves as a reference for technical support engineers in acceptance.
Part III Appendix the cover for signing.
3Numbering Specifications for Acceptance Items
. IFour-digit numeration
TXX-XX
Meaning:
TXX-XX
Acceptance sub-item
Acceptance category
. IISix-digit numeration
TXX-XXXX
Meaning
Huawei Technologies Proprietary
Acceptance Manual Part I Overview
RBT Ring Back Tone Service
TXX-XXXX
Acceptance sub-item
Acceptance item
Acceptance category
4Notes
()1
Before acceptance test starts, please ensure that the system is properly installed,
the software and hardware debugging is passed, and the system can run
normally.
()2
The acceptance items should be validated by representatives of Huawei and the
customer.
()3
In actual acceptance as well as in the preliminary tests, representatives of both
parties should observe relevant testing criteria. As some indices are already
tested before delivery, if the testing conditions are limited, sampling, or even
exemption from testing can be introduced.
Note:
In actual acceptance, please stick to the contract and stipulation agreed by both
parties. This manual serves as a reference only.
Huawei Technologies Proprietary