Scribd
Upload
122 views2 pages

Understanding Kirchhoff's Voltage Law

Kirchoff's Voltage Law (KVL) states that the algebraic sum of voltages around any closed loop is equal to zero. KVL is applied by choosing a traversal direction around a loop and writing the voltages with the appropriate signs. The voltage of each element is written as it is encountered during traversal. The resulting equation balances the sum of voltages to zero. The assumed current direction fixes the voltage polarity and must follow the passive sign convention for KVL to work correctly. Voltages can be summed in either direction around the loop, simply changing the signs in the equation.

Uploaded by

nichkhunie
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views2 pages

Understanding Kirchhoff's Voltage Law

Kirchoff's Voltage Law (KVL) states that the algebraic sum of voltages around any closed loop is equal to zero. KVL is applied by choosing a traversal direction around a loop and writing the voltages with the appropriate signs. The voltage of each element is written as it is encountered during traversal. The resulting equation balances the sum of voltages to zero. The assumed current direction fixes the voltage polarity and must follow the passive sign convention for KVL to work correctly. Voltages can be summed in either direction around the loop, simply changing the signs in the equation.

Uploaded by

nichkhunie
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Kirchoff’s Voltage Law

Kirchoff’s Voltage Law (KVL) states that the algebraic sum of the voltages across any set of
branches in a closed loop is zero. i.e.;

∑ V acrossbranches = 0

Below is a single loop circuit. The KVL computation is expressed graphically in that voltages
around a loop are summed up by traversing (figuratively walking around) the loop.

Path of Traversal
+ Vr1 -
R1
+ assumed +
10V current R2 Vr2
- direction
-
R3
- Vr3 +
Resulting KVL Equation:
Vr1 + Vr2 + Vr3 -10 = 0

The KVL equation is obtained by traversing a circuit loop in either direction and writing down
unchanged the voltage of each element whose “+” terminal is entered first and writing down
the negative of every element’s voltage where the minus sign is first met. The loop must start
and end at the same point. It does not matter where you start on the loop.
Note that a current direction must have been assumed. The assumed current creates a voltage
across each resistor and fixes the position of the “+” and “-” signs so that the passive sign con-
vention is obeyed. The assumed current direction and polarity of the voltage across each
resistor must be in agreement with the passive sign convention for KVL analysis to work.
The voltages in the loop may be summed in either direction. It makes no difference except to
change all the signs in the resulting equation. Mathematically speaking, its as if the KVL
equation is multiplied by -1. See the illustration below.

Page 1
Summation of voltage terms may be done in either direction
path of traversal path of traversal

+ Vr1 - + Vr1 -
R1 R1
+ + + +
10V R2 Vr2 10V R2 Vr2
- -
- -
R3 R3
- Vr3 + - Vr3 +
Resulting KVL Equation: Resulting KVL Equation:
Vr1 + Vr2 + Vr3 - 10 = 0 -Vr3 - Vr2 - Vr1 + 10 = 0
For both summations, the assumed current direction was the same.

Note that a current direction must have been assumed. The assumed current creates a voltage
across each resistor and fixes the position of the “+” and “-” signs so that the passive sign con-
vention is obeyed. The assumed current direction and polarity of the voltage across each
resistor must be in agreement with the passive sign convention for KVL analysis to work.

Assuming the current direction fixes the voltage references


+ Vr1 - - Vr1 +
R1 R1
+ assumed + + assumed -
10V current R2 Vr2 10V current R2 Vr2
- direction
-
- direction
+
R3 R3
- Vr3 + +Vr3 -
Resulting KVL Equation: Resulting KVL Equation:
Vr1 + Vr2 + Vr3 - 10 = 0 -Vr1 - Vr2 - Vr3 - 10 = 0
For both cases shown, the direction of summation was the same.

The case on the right above will obviously result in negative result for the current. This is cor-
rect considering the current arrow is pointing in the opposite direction.

Page 2

You might also like