Scribd
Upload
723 views1 page

BÖHLER DMO-IG GMAW Wire Specifications

This document summarizes the properties and applications of GMAW solid wire called DMO-IG. It is a low-alloyed, high temperature wire containing 0.5% molybdenum. It can be used for welding boiler plate, tube, pressure vessel and structural steels. The wire produces a tough deposit with high cracking resistance that is suitable for services up to 550°C. It has good mechanical properties and is approved by several certification bodies.

Uploaded by

दिनेश कुशवाहा
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
723 views1 page

BÖHLER DMO-IG GMAW Wire Specifications

This document summarizes the properties and applications of GMAW solid wire called DMO-IG. It is a low-alloyed, high temperature wire containing 0.5% molybdenum. It can be used for welding boiler plate, tube, pressure vessel and structural steels. The wire produces a tough deposit with high cracking resistance that is suitable for services up to 550°C. It has good mechanical properties and is approved by several certification bodies.

Uploaded by

दिनेश कुशवाहा
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

EN 12070: 1999: AWS A5.28-05: AWS A5.28M-05: [Link].

G MoSi ER70S-A1 (ER80S-G) ER49S-A1 (ER55S-G) 1.5424

BHLER DMO-IG
GMAW solid wire, low-alloyed, high temperature

Description
GMAW wire for 0.5% Mo alloyed boiler, plate and tube steels as well as in pressure vessel and structural steel engineering. Highly-quality, very tough deposit of high cracking resistance, non-ageing. Approved in long-term condition up to +550C service temperature, low temperature toughness to 40C. The wire shows very good feeding characteristics, resulting in smooth welding and wetting behaviour. Uniform copper bonding with low total copper content.

Typical Composition of Solid Wire


wt-% C 0.1 Si 0.6 Mn 1.2 Mo 0.5

Mechanical Properties of All-weld Metal


yield strength Re N/mm2 (MPa): tensile strength Rm N/mm2 (MPa): elongation A (L0=5d0) %: impact work ISO-V KV J +20C: -40C:
u u2 a

u 500 620 25 150

(47) untreated, as-welded shielding gas Ar + 18% CO2 untreated, as-welded shielding gas 100% CO2 annealed, 620C/1h/furnace down to 300C/air shielding gas Ar + 18% CO2

(470) (550) (22) (120) (47)

u2 470 590 23 160

(450) (520) (20)

a 450 570 25 150

(400) (515) (19) (120)

Operating Data
mm 0.8 1.0 1.2 Preheating, interpass temperature and post weld heat treatment as required by the base metal. shielding gases: Argon + 15- 25% CO2 100% CO2

Base Materials
high temperature steels and similar alloyed cast steels, ageing resistant and steels resistant to caustic cracking 16Mo3, S355J2G3, L320 - L415NB, L320 MB - L415MB, P255G1TH, P235GH, P265GH P295GH, P310GH, P255NH, 17MnMoV6-4, 22NiMoCr4-7, 20MnMoNi5-5, 15NiCuMoNb5, 20MnMoNi4-5, GE240GE300, 22Mo4, S255N - S460N, P255NH-P460NH ASTM A335 Gr. P1, A161-94 Gr. T1 A A182M Gr. F1, A204M Gr. A, B, C, A250M Gr. T1, A217 Gr. WC1

Approvals and Certificates


TV-D (0021.), DB (42.014.09), BB, TV-A (76), SEPROZ, CE

Same Alloy Filler Metals


SMAW electrode: GTAW rod: Flux cored wire: FOX DMO Kb FOX DMO Ti DMO-IG DMO Ti-FD SAW combination: Gas welding rod: EMS 2 Mo/BB 24 EMS 2 Mo/BB 25 DMO 19.09.2007

Subject to change without notice

SVENSKA ELEKTROD AB Box 1271, 171 24 Solna Tel 08-734 00 75, fax 08-735 68 27 e-mail: info@[Link]

You might also like