Chemicals BV
for tomorrow’s
Technology
Anticor™ & Ferrocor™
Anti-Corrosion Additives and
Metal Passivators
for tomorrow’s
World
Anticor™ A40
Label-free and biodegradable corrosion inhibitor.
Outstanding rust prevention of ferrous substrates in both
acidic and alkaline water-based systems. Anticor™ A40 No inhibitor
can also be used for direct-to-metal coatings to protect
iron-containing substrates from corroding.
Anticor™ A65N
Water-based ferrous corrosion inhibitor based on organic Anticor™ A40
acids and silane technology. Showing high compatibility
with (direct-to-metal) coating systems.
Anticor™ L4783
Very active ferrous corrosion inhibitor in neutral and Anticor™ A65N
alkaline systems. Offers great water compatibility while
increasing substrate hydrophobicity.
Anticor™ L4783
Iron chip test with and without Anticor™ corrosion
inhibitors (0.5 wt%)
Anticor™ A5N Anticor™ FA-N
Water-free, non-foaming corrosion inhibitor. Especially Hydrophobic aluminium corrosion inhibitor with very
suitable for the protection of aluminium substrates. good (self) emulsifying properties. Can also be used
Controls pitting of metal surfaces. Dispersible in water. for the protection of Zn, Pb, Sn-surfaces and Cu alloys.
Readily biodegradable.
Anticor™ C6N
Excellent passivator for aluminium substrates under
neutral, acidic and alkaline conditions. Anticor™ C6N
is also effective for the protection of copper metals in Aluminium coupons exposed to saline water for 35
neutral and alkaline environments. It is soluble in oils days, with and without Anticor™ corrosion inhibitors
and dispersible in water. (0.5 wt%)
No inhibitor Anticor™ A5N Anticor™ C6N Anticor™ FA-N
Anticor™ AMC 2330 Anticor™ PQ
Biodegradable multi-metal corrosion inhibitor, especially Oil-soluble multi-metal corrosion inhibitor based on
suitable for the protection of aluminium, copper and phosphate ester technology. It finds applications in
combinations thereof. Anticor™ AMC 2330 is emulsifiable greases, metalworking fluids, oil-based- and water-free
in water and pH neutral. systems. Upon neutralization it is also suitable for water-
based systems and coatings.
Anticor™ MPA
Effective water-based copper oxidation inhibitor over Anticor™ F1026
a broad pH range. Anticor™ MPA shows excellent Great multi-metal corrosion inhibitor. Good protection
protective properties for aluminium in high alkaline of ferrous, aluminium and copper substrates. Readily
cleaners. biodegradable.
Anticor™ RCP
Ready to use universal Rust Conversion Primer.
Anticor™ RCP is a complete paint system that creates a
strong primer coating on rusted iron surfaces but also on
iron, stainless steel, aluminium and copper substrates.
A separate brochure is available.
Rusted iron substrate before and after being
coated with Anticor™ RCP
Ferrocor™ Flash TN
Excellent flash rust inhibitor for ferrous substrates with
additional anti-corrosive properties. Effectively prevents
flash rust caused by water-based cleaners on iron
surfaces or in water-based coatings. Also effective for Flash rust test with droplets of 0.5 wt% sodium
the passivation of yellow metals e.g. copper and brass. chloride solutions with and without Ferrocor Flash
Ferrocor™ Flash TN is water-based, nitrate- and nitrite- TN on a bare iron panel. The white deposits are
free and readily biodegradable. sodium chloride crystals
0% 0.1% 0.3% 0.6% 0.8% 1.0%
Ferrocor™ Flash TN dosage
Application and properties chart
Product name Metal protection Suitable for coatings Readily Product pH
biodegradable
content
Anticor™ A5N Al - ± 89% Acidic
Anticor™ A40 Fe +* ± 96% Acidic
Anticor™ A65N Fe + ± 84% Alkaline
Anticor™ AMC 2330 Al, Cu, Mg + ± 100% Neutral
Anticor™ C6N Al, Cu + ± 94% Acidic
Anticor™ F1026 Al, Cu, Fe + ± 100% Acidic
Anticor™ FA-N Al, Zn, Pb, Sn +* ± 100% Acidic
Anticor™ L4783 Fe, Al, Cu +* ± 83% Acidic
Anticor™ MPA Al, Cu - ± 69% Alkaline
Anticor™ PQ Al, Cu, Fe +* ± 90% Acidic
Ferrocor™ Flash TN Fe, Cu + ± 98% Neutral
Anticor™ RCP Fe, Cu, Al - - Acidic
* After neutralization with CODIS™ 95, neutralization agent.
CONTACT INFORMATION
ADDAPT Chemicals B.V.
Speltdijk 1
5704 RJ Helmond
The Netherlands
Tel.: +31 (0)492 59 75 75
Fax: +31 (0)492 55 29 55
E-mail: info@[Link]
[Link]
Liability
All recommendations for the use of our products, whether given by us in writing, oral, or to be implied from
the results of tests carried out by us, are based on the current state of our knowledge. Under no circumstan-
ces shall Seller be liable for incidental, consequential or indirect damage for alleged negligence, breach
of warranty, strict liability, tort or contract arising in connection with product(s). Seller’s sole liability for any
claims shall be Buyer’s purchase price. Data and results are based on controlled lab work and must be
confirmed by Buyer by testing for its intended conditions of use. The product(s) has/have not been tested
for, and is/are therefore not recommended for, uses for which prolonged contact with mucous membranes,
abraded skin or blood is intended, or for uses for which implantations within the human body is intended.
© ADDAPT Chemicals BV, 2022-03 /03
