PHOTOCOUPLER

PS2805A-1,PS2805A-4
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER
NEPOC Series

DESCRIPTION
The PS2805A-1 and PS2805A-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light.

FEATURES
High isolation voltage (BV = 2 500 Vr.m.s.) Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) AC input response Ordering number of tape product: PS2805A-1-F3, F4, PS2805A-4-F3, F4 Pb-Free product Safety standards UL approved: File No. E72422 DIN EN60747-5-2 (VDE0884 Part2) approved (Option)

PIN CONNECTION
(Top View)
PS2805A-1

4 3
1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector

1 2
PS2805A-4

16 15 14 13 12 11 10 9

APPLICATIONS
Programmable logic controllers OA equipment Measuring instruments Hybrid IC
1 2 3 4 5 6 7 8
1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode, Cathode Cathode, Anode Emitter Collector

Document No. PN10399EJ02V0DS (2nd edition) Date Published October 2004 CP(K)

The mark

shows major revised points.

PS2805A-1,PS2805A-4
PACKAGE DIMENSIONS (UNIT: mm)

PS2805A-1
2.70.3
4 3 16 10.30.3

PS2805A-4

7.00.3

7.00.3

0.15+0.10 0.05

2.00.1

0.10.1

0.50.3 1.27 0.40.1 0.12 M

2.0+0.3 0.2

0.15+0.10 0.05

0.10.1

4.4

4.4

0.40+0.10 0.05

0.12 M

1.27

0.50.3

MARKING EXAMPLE

PS2805A-1

PS2805A-4

5A

Country Assembled

301
*1

Assembly Lot No. 1 pin Mark

PS2805A-4 N 301

Assembly Lot

*1

Last number of type No. : 5A

3 01
Week Assembled Year Assembled (Last 1 Digit) *1 For external plating Pb-Free products, perform marking to indicate that these are Pb-Free products.

N 3 01
Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code *1 For the external plating Pb-Free product, L is indicated at the second digit of the rank.

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
ORDERING INFORMATION
Part Number PS2805A-1 PS2805A-1-F3 PS2805A-1-F4 PS2805A-4 PS2805A-4-F3 PS2805A-4-F4 PS2805A-1-V PS2805A-1-V-F3 PS2805A-1-V-F4 PS2805A-4-V PS2805A-4-V-F3 PS2805A-4-V-F4 PS2805A-1 PS2805A-1-F3 PS2805A-1-F4 PS2805A-4 PS2805A-4-F3 PS2805A-4-F4 PS2805A-1-V PS2805A-1-V-F3 PS2805A-1-V-F4 PS2805A-4-V PS2805A-4-V-F3 PS2805A-4-V-F4 Order Number PS2805A-1 PS2805A-1-F3 PS2805A-1-F4 PS2805A-4 PS2805A-4-F3 PS2805A-4-F4 PS2805A-1-V PS2805A-1-V-F3 PS2805A-1-V-F4 PS2805A-4-V PS2805A-4-V-F3 PS2805A-4-V-F4 PS2805A-1-A PS2805A-1-F3-A PS2805A-1-F4-A PS2805A-4-A PS2805A-4-F3-A PS2805A-4-F4-A PS2805A-1-V-A PS2805A-1-V-F3-A PS2805A-1-V-F4-A PS2805A-4-V-A PS2805A-4-V-F3-A PS2805A-4-V-F4-A Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) PS2805A-4 PS2805A-1 Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2805A-4 Pb-Free 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Standard products (UL approved) PS2805A-1 Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) PS2805A-4 PS2805A-1 Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2805A-4 Solder Plating Specification Solder contains lead Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Safety Standards Approval Standard products (UL approved) Application *1 Part Number PS2805A-1

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Symbol Ratings PS2805A-1 Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor
*1

Unit

PS2805A-4 mA 0.8 80 mW/C mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C

IF

30 0.6 60 0.5 70 5 30 1.2 120 2 500 55 to +100 55 to +150

PD/C
PD IFP VCEO VECO IC

Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation

PC/C
PC BV TA Tstg

Isolation Voltage

*2

Operating Ambient Temperature Storage Temperature

*1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Voltage Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*1

Symbol VF Ct ICEO CTR VCE(sat) RI-O CI-O Tr tf IF = 5 mA

Conditions

MIN.

TYP. 1.2 20

MAX. 1.4

Unit V pF

V = 0 V, f = 1.0 MHz VCE = 70 V, IF = 0 mA IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 10
11

100 50 0.13 400 0.3

nA % V

0.4 5 7

pF

*1

*1 Test circuit for switching time

Pulse Input PW = 100 s Duty Cycle = 1/10 IF VOUT 50 RL = 100 VCC

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)

TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE

200

100
Diode Power Dissipation PD (mW)

80

PS2805A-4 0.8 mW/C

160

PS2805A-1 PS2805A-4 1.2 mW/C

60 PS2805A-1 40 0.6 mW/C 20

120

80

40

25

50

75

100

125

25

50

75

100

125

Ambient Temperature TA (C)

Ambient Temperature TA (C)

FORWARD CURRENT vs. FORWARD VOLTAGE

100 50
Forward Current IF (mA)

COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE

30

10 5

Collector Current IC (mA)

TA = +100C +60C +25C

25 20 15

IF = 10 mA

1 0.5

0C 25C 55C

5 mA 10 5 2 mA 1 mA 2 4 6 8 10

0.1 0.05 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0

Forward Voltage VF (V)

Collector to Emitter Voltage VCE (V)

COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE

Collector to Emitter Dark Current ICEO (nA)

COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE

10 IF = 10 mA 5 mA

10 000

1 000

Collector Current IC (mA)

VCE = 24 V VCE = 70 V

2 mA

100

1 mA

10

1 0

25

50

75

100

0.1 0

0.2

0.4

0.6

0.8

1.0

Ambient Temperature TA (C)

Collector Saturation Voltage VCE (sat) (V)

Remark The graphs indicate nominal characteristics.

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR

CURRENT TRANSFER RATIO vs. FORWARD CURRENT

400
Current Transfer Ratio CTR (%)

1.4 1.2 1.0 0.8 0.6 Normalized to 1.0 0.4 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 0 75 CTR:90% CTR:390% 50 25 0 25 50 75 100

VCE = 5 V, n=3

300

200

Sample A B C

100

0 0.01

0.1

10

100

Ambient Temperature TA (C)

Forward Current IF (mA)

SWITCHING TIME vs. LOAD RESISTANCE

100
IC = 2 mA, VCC = 5 V, CTR = 236 %
Switching Time t ( s) Switching Time t ( s)

SWITCHING TIME vs. LOAD RESISTANCE

1 000 IF = 5 mA, VCC = 5 V, CTR = 236 %

tf tr

tf 100 ts

10
td ts

10

tr

0.1 10

100

1 000

10 000

1 1

td 10 Load Resistance RL (k) 100

Load Resistance RL ()

FREQUENCY RESPONSE
5 0 5 100 10 300 15 20 RL = 1 k
IF = 5 mA, VCE = 5 V

LONG TERM CTR DEGRADATION

1.2 IF = 5 mA (TYP.) 1.0

CTR (Relative Value)

Normalized Gain GV

0.8 TA = 25C 0.6 0.4 0.2 0 10 TA = 60C

25 0.1

10 Frequency f (kHz)

100

1 000

102

103

104

105

Time (Hr)

Remark The graphs indicate nominal characteristics.

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
TAPING SPECIFICATIONS (UNIT: mm)

Outline and Dimensions (Tape)

2.00.1 4.00.1

1.750.1

1.5+0.1 0

7.550.1

2.8 MAX.

7.50.1

16.00.3

0.3 1.550.1 4.00.1 2.850.1 2.30.1

Tape Direction
PS2805A-1-F3 PS2805A-1-F4

5A 301

5A 301

5A 301

Outline and Dimensions (Reel)

2.00.5

3302.0

2.00.5 13.00.2

5A 301

R 1.0

21.00.8

1001.0

5A 301

5A 301

5A 301

Packing: 3 500 pcs/reel

5A 301

5A 301

5A 301

17.51.0 21.51.0

15.9 to 19.4 Outer edge of flange

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4

Outline and Dimensions (Tape)

2.00.1 4.00.1
1.750.1

1.5+0.1 0

2.8 MAX.

7.50.1

16.00.3

10.70.1

1.550.1 12.00.1

8.30.1

0.3 2.30.1

Tape Direction
PS2805A-4-F3 PS2805A-4-F4

Outline and Dimensions (Reel)

2.00.5

3302.0

2.00.5 13.00.2

R 1.0

21.00.8

1001.0

17.51.0 21.51.0

Packing: 2 500 pcs/reel

15.9 to 19.4 Outer edge of flange

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering Peak reflow temperature Time of peak reflow temperature Time of temperature higher than 220C Time to preheat temperature from 120 to 180C Number of reflows Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

Package Surface Temperature T (C)

(heating) to 10 s
260C MAX. 220C

to 60 s

180C
120C

12030 s (preheating)

Time (s)

(2) Wave soldering Temperature Time Preheating conditions Number of times Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron Peak Temperature (lead part temperature) Time (each pins) Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C

10

Data Sheet PN10399EJ02V0DS

PS2805A-1,PS2805A-4
(4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocouplers input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.

USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.

Data Sheet PN10399EJ02V0DS

11

4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279

Subject: Compliance with EU Directives

CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CELs understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)

If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CELs liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.