Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 2013
TI-P076-10
ST Issue 6
SMC32 and SMC32Y Carbon Steel Bimetallic Steam Traps
Description
The SMC32 and SMC32Y are carbon steel maintainable bimetallic steam traps with straight connections. The SMC32 has an integral flat strainer screen and the SM32Y an integral, cylindrical Y-type strainer. All pressure bearing components are produced by TV approved suppliers in accordance with AD-Merkblatt WO/TRD 100. Standards This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC. Certification This product is available with certification to EN 1024 3.1. Note: All certification / inspection requirements must be stated at the time of order placement.
SMC32
1 4 9
3 7
5 6
Sizes and pipe connections
", ", and 1" screwed BSP or NPT. ", ", and 1" socket weld ends to BS 3799. ", ", and 1" butt weld ends to EN 12 627. DN15, DN20 and DN25 standard flange to EN 1092 PN40, ASME B 16.5 Class 150 and 300, JIS/KS 10K and JIS/KS 20 K.
Pressure/temperature limits (ISO 6552)
Temperature C 400 350 300 200 100 0 G 0 10 E A F Steam saturation curve
SMC32Y
C 40
B 50
30 32 20 Pressure bar g
The product must not be used in this region. The product should not be used in this region or beyond its operating range as damage to the internals may occur. A - B A - C A - D A - E F - G Screwed, socket weld, butt weld and flanged ASME 300. Flanged EN 1092 PN40. Flanged JIS/KS 20K. Flanged ASME 150. Flanged JIS/KS 10K. 5 11 10
Materials
No. Part
Material
Body design conditions PN40 PMA Maximum allowable pressure 50 bar g @ 50C TMA Maximum allowable temperature 400C @ 35 bar g Minimum allowable temperature -60C Maximum operating pressure PMO 32 bar g for saturated steam service TMO Maximum operating temperature 350C @ 32 bar g Minimum operating temperature 0C Note: For lower operating temperatures consult Spirax Sarco Designed for a maximum cold hydraulic test pressure of 75 bar g
DIN 17243 C22.8 1 Cover Carbon steel (W/S 1.0460) ASTM A105N Bimetallic Corrosion resistant bimetal Rau 2 element and stainless steel Type H46 3 4 5 6 Valve seat Locking nut Strainer screen Valve 7 Cover gasket Stainless steel BS 970 431 S29 Stainless steel Stainless steel AIS 304 Stainless steel Stainless steel reinforced exfoliated graphite DIN 17243 C22.8 8 Body/flanges Carbon steel (W/S 1.0460) ASTM A105N 9 Stainless steel (M10 x 30) A2 70 DIN 17243 C22.B 10 Strainer cap Carbon steel (W/S 1.0460) ASTM A105N 11 Strainer cap gasket Stainless steel BS 1449 304 S16 Cover bolts
SMC32
Dimensions/weights (approximate) in mm and kg
Spare parts
Weight Size A A1 B C D E F G Scrd/SW/BW Flgd " DN15 95 150 94 92 17 51 - " DN20 95 150 94 92 19 51 - 1" DN25 95 160 94 92 23 51 - E Withdrawal distance - - - 1.7 1.7 1.8 B 3.1 3.7 4.4
The spare parts available are shown in solid outline. Parts drawn in broken line are not supplied as spares. Available spares Element set 2, 3, 4, 6 Strainer screen SMC32 (3 off) 5 Strainer screen and gasket SMC32Y (1 off) 5, 11 Set of cover gaskets (packet of 3) 7 Strainer cap gasket (packet of 3) 11 How to order spares Always order spares by using the descripition given in the column headed 'Available spares' and state the size and type of trap. Warning: Do not dismantle the element set by removing the locking nut (4) or the setting of the trap will be affected. Example: 1 - Element set for a Spirax Sarco " SMC32 bimetallic steam trap.
F A A1 G Withdrawal distance SMC32Y Size
9*
Weight A A1 B C D E F G Scrd/SW/BW Flgd 1.7 1.7 1.8 3.1 3.7 4.4 SMC32 5 SMC32Y 6 4 2 Element set 3 7
" DN15 95 150 94 92 - 51 54 28 " DN20 95 150 94 92 - 51 54 28 1" DN25 95 160 94 92 - 51 54 28
Capacities
4000 3000 2000 1000 500 400 300 200 100 50 0.1
Condensate kg/h
5 11 0.5 1 2 3 4 5 10 Differential pressure bar (x 100 = kPa) Cold water capacity 20 32 *Note: Items 9 and 10 are not available as spares. 10*
Hot water capacity
Safety information, installation and maintenance
For full details see the Installation and Maintenance Instructions (IM-P076-09) supplied with the product. Installation note: The SMC32 and SMC32Y are designed for installation in any position, horizontal or vertical. It is recommended that a non-return valve is fitted when discharging condensate into return lines where backpressure is experienced. It is also recommended that a diffuser is fitted when discharging to atmosphere. Increased backpressure will reduce the temperature of condensate discharge. For further information consult Spirax Sarco. For ease and maintenance, consideration should be given to fitting isolation valves upstream and downstream of the steam trap. Disposal These products are recyclable. No ecological hazard is anticipated with the disposal of these products, providing due care is taken.
Recommended tightening torques
or Item Part mm 3 Valve seat 24 A/F 9 Cover bolts 16 A/F 10 x 30 10 Strainer cap 27 A/F Nm 115 - 125 23 - 27 120 - 135
How to order
Example: 1 off Spirax Sarco " SMC32 carbon steel bodied maintainable bimetallic steam trap with an integral strainer screen and screwed BSP connections.
TI-P076-10 ST Issue 6
SMC32 and SMC32Y Carbon Steel Bimetallic Steam Traps
