27
EXPERIMENT 4
SPECIFIC GRAVITY DETERMINATION
Purpose:
This lab is performed to determine the specific gravity of soil by
using a pycnometer. Specific gravity is the ratio of the mass of unit volume
of soil at a stated temperature to the mass of the same volume of gas-free
distilled water at a stated temperature.
Standard Reference:
ASTM D 854-00 – Standard Test for Specific Gravity of Soil Solids
by Water Pycnometer.
Significance:
The specific gravity of a soil is used in the phase relationship of air,
water, and solids in a given volume of the soil.
Equipment:
Pycnometer, Balance, Vacuum pump, Funnel, Spoon.
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
28
Test Procedure:
(1) Determine and record the weight of the empty clean and dry
pycnometer, WP.
(2) Place 10g of a dry soil sample (passed through the sieve No. 10)
in the pycnometer. Determine and record the weight of the
pycnometer containing the dry soil, WPS.
(3) Add distilled water to fill about half to three-fourth of the
pycnometer. Soak the sample for 10 minutes.
(4) Apply a partial vacuum to the contents for 10 minutes, to remove
the entrapped air.
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
29
(5) Stop the vacuum and carefully remove the vacuum line from
pycnometer.
(6) Fill the pycnometer with distilled (water to the mark), clean the
exterior surface of the pycnometer with a clean, dry cloth.
Determine the weight of the pycnometer and contents, WB.
(7) Empty the pycnometer and clean it. Then fill it with distilled water
only (to the mark). Clean the exterior surface of the pycnometer
with a clean, dry cloth. Determine the weight of the pycnometer
and distilled water, WA.
(8) Empty the pycnometer and clean it.
Data Analysis:
Calculate the specific gravity of the soil solids using the following
formula:
W0
Specific Gravity, G S =
W0 + (W A − WB )
Where:
W0 = weight of sample of oven-dry soil, g = WPS - WP
WA = weight of pycnometer filled with water
WB = weight of pycnometer filled with water and soil
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
30
EXAMPLE DATA
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
31
SPECIFIC GRAVITY DETERMINATION
DATA SHEET
Date Tested: September 10, 2002
Tested By: CEMM315 Class, Group A
Project Name: CEMM315 Lab
Sample Number: B-1, SS-1, 2’-3.5’
Sample Description: Gray silty clay
Specimen number 1 2
Pycnometer bottle number 96 37
WP = Mass of empty, clean pycnometer (grams) 37.40 54.51
WPS = Mass of empty pycnometer + dry soil (grams) 63.49 74.07
WB = Mass of pycnometer + dry soil + water (grams) 153.61 165.76
WA = Mass of pycnometer + water (grams) 137.37 153.70
Specific gravity (GS) 2.65 2.61
Example Calculation: WP = 37.40 g, WPS = 63.49 g, WB = 153.61 g,
WA =137.37 g
WO = 63.49 – 37.40 = 26.09 g
26.09
GS = = 2.65
26.09 + (137.37 − 153.61)
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
32
BLANK DATA SHEETS
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
33
SPECIFIC GRAVITY DETERMINATION
DATA SHEET
Date Tested:
Tested By:
Project Name:
Sample Number:
Sample Description:
Specimen number 1 2
Pycnometer bottle number
WP = Mass of empty, clean pycnometer (grams)
WPS = Mass of empty pycnometer + dry soil (grams)
WB = Mass of pycnometer + dry soil + water (grams)
WA = Mass of pycnometer + water (grams)
Specific Gravity (GS)
Calculations:
Engineering Properties of Soils Based on Laboratory Testing
Prof. Krishna Reddy, UIC
