8413 - PUMPS FOR LIQUIDS; W/N FTTED WITH MEASURING DEVICE; LIQUID
ELEVATORS
8413
841311
841319
841320
841330
841340
841350
841360
841370
841381
841382
841391
841392
pumps for liquids, liquid elevators, parts thereof
Pumps for Dispensing Fuel or Lubricants
Other Pumps for Liquids, With a Measuring Device
Hand Pumps for Liquids
Fuel, Lubricating or Cooling Medium Pumps
Concrete Pumps
Other Reciprocating Positive Displacement Pumps
Other Positive Rotary Displacement Pumps
Other Centrifugal Pumps
Other Pumps for Liquids
Liquid Elevators
Parts of Pumps for Liquids
Parts of Liquid Elevators
Indian Standards
IS 1710 : 1989
Specification for Pumps - Vertical Turbine Mixed and Axial Flow,
Active
for Clear Cold Water
IS 3033 : 1965
Accuracy requirements for dispensing pump used in petroleum
trade
Active
IS 4111 : Part 4 Code of Practice for Ancillary Structures in Sewerage System : 1968
Part IV : Pumping Stations and Pumping Mains (Rising mains)
Active
IS 5600 : 2002 Pumps - Sewage and Drainage - Specification
Active
IS 5639 : 1970
Specification for Pumps Handling Chemicals and Corrosive
Liquids
IS 5659 : 1970 Specification for Pumps for Process Water
IS 6070 : 1983
Active
Active
Code of practice for selection, operation and maintenance of trailer
Active
fire pumps, portable pumps, water tenders and motor fire engines
IS 6536 : 1972 Pumps for handling volatile liquids
Active
Horizontal Centrifugal Pumps for Clear, Cold Water IS 6595 : Part 1
Specification - Part 1 : Agricultural and Rural Water Supply
: 2002
Purposes
Active
Horizontal centrifugal pumps for clear, cold water: Part 2 General
IS 6595 : Part 2
purposes other than agricultural and rural water supply Active
: 1993
Specification
Positive Displacement Vacuum Pumps - Measurement of
IS 6849 : Part 1
Performance Characteristics - Part 1 : Measurement of Volume
: 1999
Rate of Flow (Pumping Speed)
Active
IS 8034 : 2002 Submersible Pumpsets - Specification
Active
IS 8035 : 1999 Handpump - Shallow Well - Specification
Active
Vapour Vacuum Pumps - Measurement of Performance
IS 8243 : Part 1
Characteristics - Part 1 : Measurement of Volume Rate of Flow
: 1999
(Pumping Speed)
Active
IS 8243 : Part 2 Vapour vacuum pumps - Methods of measurement of performance
Active
: 1993
characteristics Part 2 Measurement of critical backing pressure
IS 8418 : 1999 Specification for Horizontal Centrifugal Self-Priming Pumps
Active
IS 8472 : 1998 Pumps - Regenerative or clear, cold water - Specification
Active
IS 9079 : 2002
Electric Monoset Pumps for Clear, Cold Water for Agricultural
and Water Supply Purposes - Specification
Active
IS 9137 : 1978
Code for acceptance test for centrifugal, mixed flow and axial
pumps - Class C
Active
IS 10069 :
1992
Hydraulic fluid power - Positive displacement pumps, motors and
Active
integral tranmissions - Determination of steady-state performance
IS 10129 :
2004
Hydraulic Fluid Power - Dimensions and Identification Code for
Mounting Flanges and Shaft Ends of Displacement Pumps and
Motors
IS 11147 :
1984
Recommendations for parameter definitions and letter symbols for
Active
hydraulic fluid power pumps, motors and integral transmissions
IS 11346 :
2002
Tests for Agricultural and Water Supply Pumps - Code of
Acceptance
Active
IS 14106 :
1996
Direct action handpump - Specification
Active
IS 14220 :
1994
Openwell Submersible Pumpsets - Specification
Active
IS/IEC 41 :
1991
Field Acceptance Tests to Determine the Hydraulic Performance
of Hydraulic Turbines, Storage Pumps and Pump Turbines
Active
IS 15500 :
Parts 1 to 8 :
2004
Deepwell Handpumps, Components and Special Tools Specification
Active
IS 14848 :
2000
Hydraulic Fluid Power - Pumps and Motors - Geometric
Displacements
Active
Standards
Active
ANSI/API RP-11S1-1998
Electrical Submersible Pump Teardown Report
This recommended practice covers a
recommended electric submersible pump
teardown report form.
ASME B73.1M-2001
Horizontal End Suction Centrifugal Pumps for Chemical Process, Specifications for
Establishes requirements for centrifugal pumps
of horizontal, end suction single stage,
centerline discharge design.This Standard
establishes requirements for centrifugal pumps
of horizontal, end suction single stage,
centerline discharge design. This standard was
listed for public review in the 3/9/2001 issue of
Standards Action. It is being resubmitted due
to substantive changes to the text.
ASME B73.2M-2003
Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for
Covers motor driven centrifugal pumps of
vertical shaft, single stage design with suction
and discharge nozzles in line. It includes
dimensional interchangeability requirements
and certain design features to facilitate
installation and maintenance. It is the intent of
this Standard that pumps of the same standard
dimension designation, from all sources of
supply, shall be interchangeable with respect to
mounting dimensions and size and location of
suction and discharge nozzles
ASME B73.5M-1995 (R2001)
Specification for Thermoplastic and Thermoset Polymer Material Horizontal End
Suction Centrifugal Pumps for Chemical Process
Covers contrifugal pumps of horizontal,
end-suction single-stage, centerline discharge
design, the components of which are made of
thermoplastic and thermoset polymer materials
either reinforced or nonreinforced. It includes
dimensional interchangeability requirements
and certain design features to facilitate
installation and maintenance.
ANSI/HI 1.1 - 1.2-2000
Centrifugal Pumps Nomenclature, Definitions, Application and Operation
Covers centrifugal and regenerative turbine
pumps of all industrial types except vertical
multistage diffuser types
ANSI/HI 1.3-2000
Centrifugal Pumps - Horizontal Baseplate Design
Covers centrifugal and regenerative turbine
pumps of all industrial types except vertical
multistage diffuser types. It includes design and
application.
ANSI/HI 1.4-2000
Centrifugal Pumps Nomenclature, Definitions, Application and Operation
ANSI/HI 1.6-2000
Centrifugal Pump Test
Describes centrifugal, sealless centrifugal, and
regenerative turbine pumps of all industrial
types, except vertical multistage diffuser type
and submersible pumps. It includes detailed
procedures on the setup and conduct of
hydrostatic and performance tests of such
pumps. Changes made since last publication
include the following: (a) Section 1.6.5.3 - add
explanation for the use of level "A" and "B", (b)
Section 1.6.7 - mechanical test - new, and (c)
Editorial changes to show metric units first.
ANSI/HI 12.1-12.6-2005
Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and
Operation-2005
The Slurry Pump Committee will limit its activity
to the above matters to rotodynamic pumps
that handle abrasive slurries. Excluded are
applications for wastewater pump.
UL 778-2006
Motor Operated Water Pumps
Propose the addition of requirements for Class
F and Class H Motor Insulation Systems in UL
778.
International Standards
ISO/TC 115/SC 1
Rotary positive displacement pumps Technical Requirements ISO 14847:1999
Seal-less rotodynamic pumps - Class II Specification ISO 15783:2002
Reciprocating positive displacement pumps and pump units - Technical requirements ISO
16330:2003
Manually operated pumps for drinking water Selection and acceptance - Part 1:
Southeast Asia
ISO 17613-1:2006
End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and
dimensions
ISO 2858:1975
End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft
packing
ISO 3069:2000
Technical specifications for centrifugal pumps - Class II
ISO 5199:2002
Technical specifications for centrifugal pumps - Class I
ISO 9905:1994
Corrigendum
ISO 9905:1994/Cor 1:2005
Technical specifications for centrifugal pumps - Class III
ISO 9908:1993
Federal Mandate (pumps)
Office of Energy Efficiency & Renewable Energy Mandate for pumps
http://www1.eere.energy.gov/industry/bestpractices/pdfs/pumping_2.pdf
Test Procedures, Certification & Enforcement Requirements for Plumbing Products
http://www.eere.energy.gov/buildings/appliance_standards/residential/pdfs/plmrul.pdf
Water Well Pumps
Construction, Installation, Repair & Maintenance --- State of New York
http://www.health.state.ny.us/environmental/water/drinking/part5/appendix5b.htm#5b5
Pumps for Dispensing Fuel or Lubricants
Additional requirements for 841311-Pumps for Dispensing Fuel or Lubricants
Labeling Requirements for Diesel Pumps (US Environ mental Protection Agency)
http://www.clean-diesel.org/images/DPLabelFacts121406.pdf
Separate Requirements for the State of California for the same:
http://www.arb.ca.gov/fuels/gasoline/Oxy/mtbelabl/mtbelabl.htm
