Scribd
Upload
6K views3 pages

EDC16C31 BMW: EGR Off Solution

This document provides instructions for closing the EGR valve on a BMW E60 530d vehicle with an EDC16C31 engine control unit. The steps include locating the EGR map in file E1004, changing the EGR map 2 hysteresis values to zero in 2D mode, correcting the checksum, and saving the modified binary file which should close the EGR valve.

Uploaded by

darkalfon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6K views3 pages

EDC16C31 BMW: EGR Off Solution

This document provides instructions for closing the EGR valve on a BMW E60 530d vehicle with an EDC16C31 engine control unit. The steps include locating the EGR map in file E1004, changing the EGR map 2 hysteresis values to zero in 2D mode, correcting the checksum, and saving the modified binary file which should close the EGR valve.

Uploaded by

darkalfon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EGR off solution

EDC16C31 BMW

Appy for: BMW EDC16C31 For more info: www.ecuconnections.com

Car: BMW E60 530d HW: 0281011224 SW: 361886 Solution type: close EGR valve

1. Find EGR map (Desired air quantity) - in this file E1004 2. Turn on 16bit, HiLo, decimal and 2D mode 3. Search after EGR map 2 hysteresis (16x1) like on the pictures below

4. Fill these maps with 0 like on the pictures below

5. Correct checksum and save binary file 6. EGR should be closed from now :)

You might also like