2000 Fairchild Semiconductor Corporation DS009821 www.fairchildsemi.

com
October 1988
Revised April 2000
D
M
7
4
L
S
1
8
1

4
-
B
i
t

A
r
i
t
h
m
e
t
i
c

L
o
g
i
c

U
n
i
t
DM74LS181
4-Bit Arithmetic Logic Unit
General Description
The DM74LS181 is a 4-bit Arithmetic Logic Unit (ALU)
which can perform all the possible 16 logic operations on
two variables and a variety of arithmetic operations.
Features
I Provides 16 arithmetic operations: add, subtract, com-
pare, double, plus twelve other arithmetic operations
I Provides all 16 logic operations of two variables:
exclusive-OR, compare, AND, NAND, OR, NOR, plus
ten other logic operations
I Full lookahead for high speed arithmetic operation on
long words

Ordering Code:
Logic Symbols
Active High Operands
Active Low Operands
V
CC
= Pin 24
GND = Pin 12
Connection Diagram
Pin Descriptions
Order Number Package Number Package Description
DM74LS181N N24A 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.600 Wide
Pin Names Description
A0A3 Operand Inputs (Active LOW)
B0B3 Operand Inputs (Active LOW)
S0S3 Function Select Inputs
M Mode Control Input
C
n
Carry Input
F0F3 Function Outputs (Active LOW)
A = B Comparator Output
G Carry Generate Output (Active LOW)
P Carry Propagate Output (Active LOW)
C
n+4
Carry Output
www.fairchildsemi.com 2
D
M
7
4
L
S
1
8
1
Functional Description
The DM74LS181 is a 4-bit high speed parallel Arithmetic
Logic Unit (ALU). Controlled by the four Function Select
inputs (S0S3) and the Mode Control input (M), it can per-
form all the 16 possible logic operations or 16 different
arithmetic operations on active HIGH or active LOW oper-
ands. The Function Table lists these operations
When the Mode Control input (M) is HIGH, all internal car-
ries are inhibited and the device performs logic operations
on the individual bits as listed. When the Mode Control
input is LOW, the carries are enabled and the device per-
forms arithmetic operations on the two 4-bit words. The
device incorporates full internal carry lookahead and pro-
vides for either ripple carry between devices using the C
n+4
output, or for carry lookahead between packages using the
signals P (Carry Propagate) and G (Carry Generate). In the
ADD mode, P indicates that F is 15 or more, while G indi-
cates that F is 16 or more. In the SUBTRACT mode, P indi-
cates that F is zero or less, while G indicates that F is less
than zero. P and G are not affected by carry in. When
speed requirements are not stringent, it can be used in a
simple ripple carry mode by connecting the Carry output
(C
n+4
) signal to the Carry input (C
n
) of the next unit. For
high speed operation the device is used in conjunction with
the 9342 or 93S42 carry lookahead circuit. One carry loo-
kahead package is required for each group of four
DM74LS181 devices. Carry lookahead can be provided at
various levels and offers high speed capability over
extremely long word lengths.
The A = B output from the device goes HIGH when all four
F outputs are HIGH and can be used to indicate logic
equivalence over four bits when the unit is in the subtract
mode. The A = B output is open-collector and can be wired-
AND with other A = B outputs to give a comparison for
more than four bits. The A = B signal can also be used with
the C
n+4
signal to indicate A > B and A < B.
The Function Table lists the arithmetic operations that are
performed without a carry in. An incoming carry adds a one
to each operation. Thus, select code LHHL generates A
minus B minus 1 (2s complement notation) without a carry
in and generates A minus B when a carry is applied.
Because subtraction is actually performed by complemen-
tary addition (1s complement), a carry out means borrow;
thus a carry is generated when there is no underflow and
no carry is generated when there is underflow. As indi-
cated, this device can be used with either active LOW
inputs producing active LOW outputs or with active HIGH
inputs producing active HIGH outputs. For either case the
table lists the operations that are performed to the oper-
ands labeled inside the logic symbol.
Function Table
Note 1: Each bit is shifted to the next most significant position.
Note 2: Arithmetic operations expressed in 2s complement notation.
Mode Select Active LOW Operands Active HIGH Operands
Inputs & F
n
Outputs & F
n
Outputs
Logic Arithmetic
(Note 2)
Logic Arithmetic
(Note 2)
S3 S2 S1 S0 (M = H) (M = L) (C
n
= L) (M = H) (M = L) (C
n
= H)
L L L L A A minus 1 A A
L L L H AB AB minus 1 A + B A + B
L L H L A + B AB minus 1 A B A + B
L L H H Logic 1 minus 1 Logic 0 minus 1
L H L L A + B A plus (A + B) AB A plus AB
L H L H B AB plus (A + B) B (A + B) plus AB
L H H L A B A minus B minus 1 A B A minus B minus 1
L H H H A + B A + B AB AB minus 1
H L L L A B A plus (A + B) A + B A plus AB
H L L H A B A plus B A B A plus B
H L H L B AB plus (A + B) B (A + B) plus AB
H L H H A + B A + B AB AB minus 1
H H L L Logic 0 A plus A (Note 1) Logic 1 A plus A (Note 1)
H H L H AB AB plus A A + B (A + B) plus A
H H H L AB AB minus A A + B (A + B) plus A
H H H H A A A A minus 1
3 www.fairchildsemi.com
D
M
7
4
L
S
1
8
1
Logic Diagram
www.fairchildsemi.com 4
D
M
7
4
L
S
1
8
1
Absolute Maximum Ratings(Note 3)
Note 3: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The Recommended Operating Conditions table will define the conditions
for actual device operation.
Recommended Operating Conditions
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Note 4: All typicals are at V
CC
= 5V, T
A
= 25C.
Note 5: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Supply Voltage 7V
Input Voltage 7V
Operating Free Air Temperature Range 0C to +70C
Storage Temperature Range 65C to +150C
Symbol Parameter Min Nom Max Units
V
CC
Supply Voltage 4.75 5 5.25 V
V
IH
HIGH Level Input Voltage 2 V
V
IL
LOW Level Input Voltage 0.8 V
I
OH
HIGH Level Output Current 0.4 mA
I
OL
LOW Level Output Current 8 mA
T
A
Free Air Operating Temperature 0 70 C
Symbol Parameter Conditions Min
Typ
Max Units
(Note 4)
V
I
Input Clamp Voltage V
CC
= Min, I
I
= 18 mA 1.5 V
V
OH
HIGH Level V
CC
= Min, I
OH
= Max,
2.7 V
Output Voltage V
IL
= Max
V
OL
LOW Level V
CC
= Min, I
OL
= Max,
0.35 0.5
V Output Voltage V
IH
= Min
I
OL
= 4 mA, V
CC
= Min 0.25 0.4
I
I
Input Current @ Max V
CC
= Max, V
I
= 7V M input 0.1
Input Voltage A
n
, B
n
0.3
mA
S
n
0.4
C
n
0.5
I
IH
HIGH Level V
CC
= Max, V
I
= 2.7V M input 20
Input Current A
n
, B
n
60
A
S
n
80
C
n
100
I
IL
LOW Level V
CC
= Max, V
I
= 0.4V M input 0.4
Input Current A
n
, B
n
1.2
mA
S
n
1.6
C
n
2.0
I
OS
Short Circuit V
CC
= Max
20 100 mA
Output Current (Note 5)
I
CC
Supply Current V
CC
= Max, B
n
, C
n
= GND
37 mA
S
n
, M, A
n
= 4.5V
5 www.fairchildsemi.com
D
M
7
4
L
S
1
8
1
Switching Characteristics
V
CC
= 5V, T
A
= 25C
Sum Mode Test Table 1 Function Inputs
S0 = S3 = 4.5V, S1 = S2 = M = 0V
Symbol Parameter Conditions
C
L
= 15 pF
Units
Min Max
t
PLH
Propagation Delay M = GND 27
ns
t
PHL
C
n
to C
n+4
20
t
PLH
Propagation Delay M = GND 26
ns
t
PHL
C
n
to F 20
t
PLH
Propagation Delay M, S
1
, S
2
= GND; 29
ns
t
PHL
A or B to G (Sum) S
1
, S
3
= 4.5V 23
t
PLH
Propagation Delay M, S
0
, S
3
= GND; 32
ns
t
PHL
A or B to G (Diff) S
1
, S
2
= 4.5V 26
t
PLH
Propagation Delay M, S
1
, S
2
= GND; 30
ns
t
PHL
A or B to P (Sum) S
0
, S
3
= 4.5V 30
t
PLH
Propagation Delay M, S
0
, S
3
= GND; 30
ns
t
PHL
A or B to P (Diff) S
1
, S
2
= 4.5V 33
t
PLH
Propagation Delay M, S
1
, S
2
= GND; 32
ns
t
PHL
A
i
or B
i
to F
i
(Sum) S
0
, S
3
= 4.5V 25
t
PLH
Propagation Delay M, S
0
, S
3
= GND; 32
ns
t
PHL
A
i
or B
i
to F
i
(Diff) S
1
, S
2
= 4.5V 33
t
PLH
Propagation Delay M = 4.5V 33
ns
t
PHL
A or B to F (Logic) 29
t
PLH
Propagation Delay M, S
1
, S
2
= GND; 38
ns
t
PHL
A or B to C
n+4
(Sum) S
0
, S
3
= 4.5V 38
t
PLH
Propagation Delay M, S
0
, S
3
= GND; 41
ns
t
PHL
A or B to C
n+4
(Diff) S
1
, S
2
= 4.5V 41
t
PLH
Propagation Delay M, S
0
, S
3
= GND; 50
ns
t
PHL
A or B to A = B S
1
, S
2
= 4.5V; 62
R
L
= 2 k to 5.0V
Input Other Input Other Data Inputs Output
Symbol Under Same Bit Under
Test Apply Apply Apply Apply Test
4.5V GND 4.5V GND
t
PLH
A
i
B
i
None Remaining C
n
F
i
t
PHL
A and B
t
PLH
B
i
A
i
None Remaining C
n
F
i
t
PHL
A and B
t
PLH
A B None None Remaining P
t
PHL
A and B, C
n
t
PLH
B A None None Remaining P
t
PHL
A and B, C
n
t
PLH
A None B Remaining Remaining G
t
PHL
B A, C
n
t
PLH
B None A Remaining Remaining G
t
PHL
B A, C
n
t
PLH
A None B Remaining Remaining C
n+4
t
PHL
B A, C
n
t
PLH
B None A Remaining Remaining C
n+4
t
PHL
B A, C
n
t
PLH
C
n
None None All All Any F
t
PHL
A B or C
n+4
www.fairchildsemi.com 6
D
M
7
4
L
S
1
8
1
Diff Mode Test Table 2 Function Inputs
S1 = S2 = 4.5V, S0 = S3 = M = 0V
Logic Mode Test Table 3 Function Inputs
S1 = S2 = M = 4.5V, S0 = S3 = 0V
Input Other Input Other Data Inputs Output
Symbol Under Same Bit Under
Test Apply Apply Apply Apply Test
4.5V GND 4.5V GND
t
PLH
A None B Remaining Remaining F
i
t
PHL
A B, C
n
t
PLH
B A None Remaining Remaining F
i
t
PHL
A B, C
n
t
PLH
A None B None Remaining P
t
PHL
A and B, C
n
t
PLH
B A None None Remaining P
t
PHL
A and B, C
n
t
PLH
A B None None Remaining G
t
PHL
A and B, C
n
t
PLH
B None A None Remaining G
t
PHL
A and B, C
n
t
PLH
A None B Remaining Remaining A = B
t
PHL
A B, C
n
t
PLH
B A None Remaining Remaining A = B
t
PHL
A B, C
n
t
PLH
A B None None Remaining C
n+4
t
PHL
A and B, C
n
t
PLH
B None A None Remaining C
n+4
t
PHL
A and B, C
n
t
PLH
C
n
None None All None C
n+4
t
PHL
A and B
Input Other Input Other Data Inputs Output
Symbol Under Same Bit Under
Test Apply Apply Apply Apply Test
4.5V GND 4.5V GND
t
PLH
A B None None Remaining Any F
t
PHL
A and B, C
n
t
PLH
B A None None Remaining Any F
t
PHL
A and B, C
n
7 www.fairchildsemi.com
D
M
7
4
L
S
1
8
1

4
-
B
i
t

A
r
i
t
h
m
e
t
i
c

L
o
g
i
c

U
n
i
t
Physical Dimensions inches (millimeters) unless otherwise noted
24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.600 Wide
Package Number N24A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com