ALXC Dualband Antenna
4168.11.33.00
870-960/1710-1880MHz
65 1.5 m X-polarized FET Antenna
Part Number:
7330.00
Electrical Downtilt: 0
Horizontal Beamwidth: 65
Gain: 15.5/17.5 dBi (13.4/15.4 dBd) Connector Type: 7/16 DIN female
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with
outstanding performance characteristics. Its outer radome is made of glass-fiber
reinforced polyester (GRP), while the inner RF-module utilizes sophisticated
patch technology for covering the two frequencies. ALXC radiating elements are
based on a patented dualband function that allowed designing an antenna
matched for two or several frequency bands, with no need for diplex filters. This
technique minimizes intermodular distortion, while generating less loss and
ensuring higher gain, maximum efficiency, for each set of beamwidths. The
ALXC is available in a number of variants, to provide the widest range of solutions
for specific individual cell-planning strategies implemented by Powerwave clients.
Research and field studies conducted in cooperation with system suppliers and
operators establish the Powerwave dualband concept as an outstanding
technique for enhancing system performance and cutting costs.
Key Benefits
High gain performance
Light and slim design
Robust and reliable
Pre-mounted brackets
Guaranteed passive intermodulation performance
D031-08144 Rev A
870-960/1710-1880 MHz
ALXC Dualband Antenna
Electrical Specifications
Frequency band (MHz)
870-960 / 1710-1880
Gain, 0.5 (dBi, dBd)
15.5/17.5, 13.4/15.4
Polarization
Dual linear slanted
Nominal Impedance (Ohm)
50
VSWR
<1.5:1
Isolation between inputs(dB)
>30
Horizontal tracking (dB)
<2
Cross-polar discrimination (dB)
>11
Horizontal -3 dB beamwidth
65 +/-5
Electrical downtilt
Vertical -3dB Beam width
13/7
Vertical beam squint
<0.5
Sidelobe suppression, Vertical 1 st upper (dB)
>16
First null-fill (dB)
>-20/-18
Front-to-back ratio (dB)
>26
Front-to-back ratio, total power (dB)
>22
IM3, 2Tx@43dBm (dBc)
>-150
Power Handling, Average per input (W)
Power Handling, Average total (W)
300
600
Typical Horizontal and Vertical 7330.00 Patterns
925 MHz
All specifications are subject to change without notice.
Contact your Powerwave representative for complete performance data.
Typical Horizontal and Vertical 7330.00 Patterns
1805 MHz
Mechanical Specifications
Connector Type
7/16 DIN female
Dimensions, HxWxD
1450x280x125mm (49x11x5)
Weight with Brackets
10.8kg (24 lbs)
Wind Load, Frontal, 42 m/s Cd=1 (N)
450
Survival Wind Speed
70m/s (156 mph)
Lightning Protection
DC Grounded
Radome Material
GRP
Radome Color
Light gray RAL 7035 on all visible plastic parts
Packing Size
1620x355x255mm (54x12x10)
Shipping weight
13.5kg (30 lbs)
Corporate Headquarters
Powerwave Technologies, Inc.
1801 East St. Andrew Place
Santa Ana, CA 92705 USA
Tel: 714-466-1000
Fax: 714-466-5800
[Link]
Main European Office
Antennvgen 6
SE-187 80 Tby
Sweden
Tel: +46 8 540 822 00
Fax: +46 8 540 823 40
Main Asia Pacific Office
23 F Tai Yau Building
181 Johnston Road
Wanchai, Hong Kong
Tel: +852 2512 6123
Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
