This chapter provides an opportunity to learn CAMWorks 2 Axis Mill through a step by step

hands-on tour of the features and functions.

The exercises in this chapter are intended to show you how to use CAMWorks and may not
correspond to actual machining practices.
IMPORTANT! CAMWorks uses a set of knowledge-based rules to assign machining
operations to features. The Technology Database contains the data for the machining
process plans and can be customized for your facility's machining methodology. When you
do these exercises, your results may not be the same as described in the steps and illustrated
in the figures. This is because the machining sequences and operations data in your
Technology Database may be different from the database used to produce the
documentation.

2 Axis Mill 1

2 Axis Mill 1
What You'll Learn
Steps to Generate Mill Toolpaths and NC Code in Part Mode
The following steps are used to generate Mill toolpaths and NC code:
1. Model the part or open the part file in SolidWorks.
2. Change to the CAMWorks Feature tree.
3. Define the Machine and modify the controller parameters.
4. Define the stock.
5. Define machinable features.
6. Generate the operation plan and adjust machining parameters.
7. Generate toolpaths.
8. Post process the toolpaths.

START

Model part in
SolidWorks or
import part

Adjust machining
parameters as
needed

Generate toolpaths

Post process
Change to
CAMWorks
Feature tree

Generate
operation plan

Define machinable
features
Define machine
& change controller
parameters

Define Stock

Transmit file into

CNC

END

Learning 2 Axis Mill Basics 1-2

The next series of exercises show you how to generate finish toolpaths on a SolidWorks part
model. In order to give you a general understanding of how to use CAMWorks, you work
with a part that was previously modeled in SolidWorks. When you define the operations and
toolpaths, you will follow steps that are not explained in depth. This is done to show you the
basics of generating toolpaths from start to finish without getting into the details at this time.
Sample parts are provided for the exercises in this manual. When you install CAMWorks,
these files are installed automatically.

Step 1: Model Part in SolidWorks or Import Part

A part is a solid that is created with SolidWorks or imported into SolidWorks from another
CAD system via an IGES, Parasolid, SAT file, etc. This exercise uses an existing
SolidWorks part.
1. Open the part file MILL2AX_1.SLDPRT in the \examples folder inside the CAMWorks
folder (e.g., \program files\camworks\examples).
The FeatureManager design tree lists the features, sketches, planes
and axes in the part.
The tabs at the bottom or top of the tree are for moving between the
SolidWorks trees and the CAMWorks trees.
If the CAMWorks tabs are not visible, you can expand the size of
the tree. Position the cursor on the line that divides the tree from the
graphics area. When the cursor changes to a bar, drag the bar to the
right until the tabs display.

CAMWorks Feature Tree tab

Step 2: Change to CAMWorks Feature Tree

1.

Click the CAMWorks Feature Tree tab.

The CAMWorks Feature tree displays. Initially, the tree lists the NC Manager, Stock
Manager, Machine and Recycle Bin items.

CAMWorks menu

CAMWorks
toolbar

Graphics area

CAMWorks
Feature tree

Feature Tree tab

Part model

Operation Tree tab

Message Window

CAMWorks Machining Trees

The CAMWorks machining trees provide an outline view of the machining information for
the model. Initially, the CAMWorks Feature tree shows only the NC Manager, Stock
Manager, Machine and Recycle Bin items. As you follow the steps to generate an NC
program, this tree expands to include Part Setups and machinable features. The tabs are for
moving between the SolidWorks trees and the CAMWorks trees.

Stock Manager
The stock is the material from which the part will be machined. You can define the stock
as a rectangular shape or as an extruded sketch. You can also specify the type of material.
Machine
The Machine item defines the machine tool that the part will be machined on. The
machine definition includes the type of machine (i.e., mill or turn), tool definitions and
the machine controller (post processor). The machines are set up in the Technology
Database.
Recycle Bin
The Recycle Bin in the CAMWorks Feature tree is used to store machinable features that
you do not intend to machine.

CAMWorks Menu
1. Click CAMWorks on the SolidWorks menu bar. The CAMWorks menu lists the
CAMWorks commands. The commands are explained in the CAMWorks online Help.
2. Right click on the NC Manager in the tree. This is a shortcut menu. The right-click
shortcut menus provide access to a variety of commands.
CAMWorks Toolbar
The CAMWorks toolbar provides access to the main CAMWorks commands found on the
CAMWorks menu. Clicking a toolbar button is the same as selecting a command from the
NC Manager level, regardless of the active item in the tree.
1. Locate the CAMWorks toolbar and click the Options button.
2. In the Options dialog box, click each tab to view the options
and settings that you can change in CAMWorks.
3. Click the Help button at the bottom of the dialog box. Each tab is explained in the online
Help.
4. Click the Close button in the upper right corner of the Help window to close the window.
5. Click Cancel to close the Options dialog box.

Step 3: Define the Machine

The machine includes information that identifies what to machine, how to machine it, and
the format of the NC output. Important parameters of the machine definition include:

Machine type mill or turn: The machine type defines the machinable feature set that
can be recognized automatically and defined interactively.
The icons that display in the tree identify the current machine as either mill or turn:
Mill Machine
Turn Machine
An alternative machine can be selected at any time to output different G-code programs
for alternative machine tools. If the machine type changes, then all features and
operations will be deleted.

Tool crib: A subset of tools from the tool library that are commonly loaded into or used
with the current machine.

Controller: Also called a post processor. This post processor identifies the format of the
NC G-code output.
Define the machine:
1.

Right click Mill machine - mm in the

CAMWorks
Feature tree.
The shortcut menu displays. Right-click shortcut menus
display commands that are appropriate for the item that is
highlighted in the tree.
2. Select Edit Definition on the shortcut menu.

3.

4.

The Machine dialog box displays the

Machine tab. The default selected
machine is specified in the Technology
Database. Mill machine mm is the
default machine used for the metric
parts in this manual. When you use
CAMWorks to machine your own
parts, select the machine tool you want
to use to machine the part.
Machine tools are set up in the
Technology Database. Before using
CAMWorks to machine your parts,
make sure you define the machine tools
available in your facility. For more
information, see Chapter 8.
In the Available machines list,
highlight Mill machine mm and click
the Select button.

Click the Tool crib tab and make sure

Tool Crib 1 (metric) is selected.
The Tool Crib page allows you to
choose a Tool Crib, which is a set of
tools or tool assemblies that are used
with the machine you have chosen.
These are not all the tools that are
available, but a subset that you can
modify to represent the actual set of
tools that the machine has loaded.
Tool Crib 1 (metric) is a default tool
crib that has been set up for the sample
Mill machine. When you define your
machine tools in the Technology
Database, you can set up your own tool
cribs.

5.

6.

7.

Click the Controller tab.

The Controller tab allows you to select the post processor from a list of available
controllers. The list that displays depends on the post processors that are installed on your
system. By default, CAMWorks is supplied with several default post processors that may
or may not be suitable for your needs. Contact your CAMWorks reseller for information
on making changes to these post processors
or for other post processors.
If the controllers do not display, use the
Browse button to locate the folder
containing the controller files (*.ctl).
If FANTUTM (the tutorial post processor)
is not highlighted, highlight it in the list and
click the Select button. FANTUTM is the
controller used for the exercises in this
manual. When you use CAMWorks to
machine your own parts, select your
machine tool controller or post processor.
The Current information area displays
information about the FANTUTM
controller.
A short description displays in the window
below the Current information. This
window contains information only if an
optional file has been created for the post
processor.
Click the More button.
A longer description displays. The More button is activated only if a second optional file
has been created. This information is intended for use in training or as a detailed
description of post processor attributes that can be created.
Information files are provided for the sample FANTUTM post processor that is used for
the exercises in this manual. Your TekSoft dealer or your company manager may be able
to supply these files if they are available for your post processor. If files are not available,
you can create post information files as explained in the online Help.
Click the Posting tab.
The parameters on this page are used for the following:
To provide information required to generate the NC program. The parameters are
machine-dependent and different parameters may display for your controller. The
value for a parameter is output in the NC code if the machine requires it.
To provide information for the Setup Sheet, a file that is created when the NC
program file is generated. All of the controller parameters are included in the Setup
Sheet.

8.
9.
10.

Type 1001 for the Program Number and

press the down arrow on the keyboard.
Type Stainless for the Material and press the
down arrow.
Type 40mm for the Part Thickness and click
OK.

Step 4: Define the Stock

The stock is the material from which the part will be machined. The default stock is the
smallest cube (bounding box) that the part will fit into. Typically, this is not the size of the
stock you will be using. You can change the stock definition either by offsetting the
bounding box from the part or by defining the stock from a sketch and a depth.
In this exercise, you define the stock as a box offset from the part.
1. Right click Stock Manager in the CAMWorks
Feature tree and select Edit Definition on the
shortcut menu.
The Manage Stock dialog box displays.

2.

3.
4.

5.
6.

For the Bounding

box offset, type 1
for X+ and click
the X+ button
(Uniform X).
Repeat step 2
for Y+ and Z+
Click the Material
down arrow and
select 304L.
Click Yes to
continue.
Click OK to close
the dialog box.

Step 5: Define Machinable Features

In CAMWorks, machining can be done only on machinable features. You use the following
two methods to define machinable features:

Automatic Feature Recognition (AFR)

Automatic Feature Recognition analyzes the part shape and attempts to define most
common machinable features such as pockets, holes, slots and bosses. Depending on the
complexity of the part, AFR can save considerable time in defining two-dimensional
prismatic features.

Interactively created features

If AFR does not recognize a feature you want to machine, you need to define the feature
using the Insert 2.5 Axis Feature command. If you have 3 Axis Milling, multi-surface
features can be defined using the Insert 3 Axis Feature command.
The idea of AFR is to analyze the part for features that can be machined. This process is
much the same as what you would do if you were to pick up a part that you had to machine.
You would look it over, take measurements, and begin deciding how to define areas or
features to machine and what machining processes you
would need.
CAMWorks is not machining the SolidWorks features
directly. It creates a separate list of Machinable
Features instead. This is because a single SolidWorks
feature may have several areas that need to be
machined in different ways with different tools.
For example, SolidWorks would see the part on the
right as having an extruded cut for the whole pocket
and an extruded boss for the ribs. That works well for
modeling parts in SolidWorks, but not for machining
purposes. There are actually 5 pockets of 3 different types to
machine here.
Look at the CAMWorks Feature tree. There are 3 Machinable
Features in the list: one for the large pocket on top, and 2 for
the two different types of pockets around the ribs. This gives
you the most flexibility for machining.
Using Automatic Feature Recognition (AFR)
Define machinable features automatically:
1. Select one of the following methods to extract features:
Right click NC Manager and select Extract Machinable
Features on the shortcut menu.
or
Click the Extract Machinable Features button
on the CAMWorks toolbar.

The CAMWorks Message Window displays.

This window displays automatically to report
the progress and status of the current process.
Generating Part Setups is always the last
item. When you see it, you know the AFR
process is almost complete.
You can control whether this window
displays temporarily or permanently by selecting the Options command on the
CAMWorks menu and checking the Message Window option on the General tab in the
Options dialog box.
CAMWorks generates the Part Setup and machinable features. The items display in the
CAMWorks Feature tree.
The Part Setup is the 2 axis plane that the tool movement will be based on. It has an
origin location, and X, Y, and Z direction vectors. The Part Setup is created
automatically; however, you can move the origin, and change the direction and angles of
the X and Y axes.
A Part Setup is created for each different tool orientation. There is only one Part Setup
for this part because all features can be machined using a single tool orientation. For each
Part Setup, the machinable features are listed in the order in which they were recognized.
The Feature tree allows you to:
Copy, rename, suppress, delete and combine
machinable features
Change machinable feature parameters
Change the order in which the features are
machined
Insert 2.5 Axis and 3 Axis features
Search for a feature based on item name
Hide or show feature display in graphics area
Generate an Operation Plan and find the first operation for a feature
Did You Know ...

Features that have no operations and features that could not produce operations
because the feature conditions have not been defined in the Technology Database
display in a different color. You can set the color on the Display tab in the Options
dialog box.
Most feature parameters are fixed; however, some parameters can be changed using the
Parameters command on the feature shortcut menu.
2. Right click Hole Pattern1 in the tree and select Parameters on the shortcut menu.
The Hole Parameters dialog box displays the number of components and the hole
parameters. Since there is no physical information about the type of hole, CAMWorks
allows you to define an attribute for the hole (Drill, Bore, Ream, Thread or a user-defined
attribute).

Click the down arrow next to Drill to see the choices.

4. Click Thread in the list.
The figure changes to reflect your choice and the Thread parameters are enabled.
5. Click the down arrow next to Thread and select Drill again, then click OK to close the
dialog box.
6. Click the + next to Hole Pattern1 in the CAMWorks Feature tree.
The tree expands to display each individual hole.
7. Click the - next to Hole Pattern1.
Save the part with the machinable feature data:
3.

Click the Options button the CAMWorks toolbar.

Note that you can also click CAMWorks on the menu bar or right click NC Manager in
the tree and select the Options command.
9. On the General tab, make sure the Save/Restore part option is checked, then click OK.
If this option is checked, when you save and close a part document, the machining data is
saved. When the part document is opened again, the machining data is restored along
with the part design information.
If this option is not checked, when you save and close a part document that contains at
least one CAMWorks Setup, a message indicates that Save/Restore is disabled. If you
click Yes, CAMWorks saves all CAMWorks data before closing the file. If you click No,
CAMWorks closes the part and discards any new CAMWorks data since the last save.
10. Click Save As on the File menu.
11. In the Save As dialog box, type cwex1 and click the Save button.
SAVE FREQUENTLY!
When you open a file, you are actually working on a copy of the file. The original is
still stored on disk. Periodically saving your file ensures that your latest work is
retained.
CAMWorks provides an Auto save option on the General tab in the Options dialog
box for automatically saving your CAMWorks data.
Frequent saves prevent having to redo a time-consuming model or CAM operation. If
a power failure occurs, you will lose whatever you have been working on.
8.

Defining Features Interactively

Automatic Feature Recognition can save a significant amount of time; however, AFR does
have limitations. AFR cannot recognize every feature on complex parts and does not
recognize some types of features. To machine these areas, you need to define machinable
features interactively using the Insert 2.5 Axis Feature command.
In this exercise, you insert a Face Feature so that you can face the top of the part. In order to
define a Face Feature, you select a face on the SolidWorks part that is at the depth you want
to face the part to. In this example, the entire top of the part is the same height, so you can
select any of the topmost faces.

1.

2.
3.

4.

5.

6.
7.
8.
9.

Right click Part Setup1 in the CAMWorks Feature tree and select Insert 2.5 Axis Feature
on the shortcut menu.
The 2.5 Axis Feature Wizard: Feature & Cross Section Definition dialog box displays.
Click the down arrow next to the Type list box and select Face Feature.
Click the main face.
The outline of the face is
highlighted on the part and Face <1>
displays in the Entities selected list.
If the Check for taper & fillets option
is checked, remove the checkmark.
If the feature you are defining does
not contain any fillets at the base of
the feature, you can disable Check for
taper & fillets to improve the
performance of the wizard.
Click the Next button.
The 2.5 Axis Feature Wizard: End
Conditions dialog box displays. This
dialog box allows you to determine
how CAMWorks calculates the depth
of the feature and select an attribute
that defines a unique machining
sequence.
Leave the End condition Type set to Upto Stock.
Leave the Attribute set to Coarse.
Click Finish.
Click Close to close the 2.5 Axis Feature Wizard:
Feature & Cross Section Definition dialog box.
Face Feature1 displays in the CAMWorks Feature
tree. You have now defined all the machinable
features in this part and you are ready to generate the
Operation Plan.

Step 6: Generate Operation Plan and Adjust Machining Parameters

An Operation Plan contains information on how each machinable feature is to be machined
and how the NC code will be output. When Generate Operation Plan is run, operations for
each machinable feature are created automatically based on information in the Technology
Database. In some situations, the operations defined for a feature in the Technology
Database may not be sufficient and additional operations may be required. You can insert
operations manually using the Insert 2 Axis Operation, Insert Hole Operation and Insert 3
Axis Operation commands. These commands are explained in the CAMWorks online Help.

1.

2.

Select one of the following methods to generate an operation plan:

Right click Part Setup1 in the CAMWorks Feature tree and click Generate Operation
Plan on the shortcut menu.
or
Click the Generate Operation Plan button on the
CAMWorks toolbar. Clicking this toolbar button is the same as selecting the command
from the NC Manager level, regardless of the active item in the tree.
CAMWorks generates the operation plan for all the machinable features in Part Setup1.
The operations are listed in the CAMWorks Operation tree, which is accessed by clicking
the CAMWorks Operation Tree tab.
Click the CAMWorks Operation Tree tab.
The CAMWorks Operation tree provides an outline view of the operations for the
machinable features. Operations are listed under the Part Setup in the same order as the
machinable features. At the top of the tree is the NC Manager. The Stock Manager and
Machine items function the same as in the CAMWorks Feature tree. You can change the
stock size and shape and the controller definition used by CAMWorks to produce Gcode.
The CAMWorks Operation tree allows you to:
Insert, rename, suppress, and delete operations
Change operation parameters
Combine operations
Sort operations
Change the machining order
Generate toolpaths
Simulate toolpaths
Post process the toolpaths
Hide or show toolpath display
Search based on item name
To the left of each toolpath operation is a plus sign (+).
Clicking a plus sign displays the name of the
Machinable Feature that this operation is going to machine. These Machinable Feature
items can be used to view geometric information and to modify the machining depth of
the feature.
Did You Know ...

If an operation displays in a color instead of black, then toolpaths have not been
generated. This occurs when you insert a new operation interactively, you insert a new
feature interactively and generate operations for the new feature, or CAMWorks cannot
generate the toolpath for an operation because of an error in the toolpath algorithm or a
parameter is not correct. You can set the color on the Display tab in the Options dialog
box.

The operations that are generated by CAMWorks are based on information stored in the
Technology Database. These operations are intended to be used as a starting point. Each
operation contains machining parameters that affect how the toolpath is created and specific
parameters that will be output to the NC program. These parameters can be edited before
generating the toolpaths and post processing the part.
Edit operation parameters using the Edit Definition command on the shortcut menu:
1. Right click on Rough Mill5 (the operation generated for Irregular Pocket2) in the
CAMWorks Operation tree.
2. Select the Edit Definition command on the shortcut menu.
The Machining Parameters dialog box displays. This dialog box gives you access to all
the parameters used to define the toolpath.
General parameters for the type of toolpath include the method of machining, depth of
cut, step over, stock allowance, retract height, speeds and feeds. This dialog box also
gives you access to all the parameters for the tool you are using and allows you to select a
different tool.
3. Click the Roughing tab and change the Pocketing Pattern to Zigzag.
4. Click the Feature Options tab and change the Entry type to Entry Drill.
5. Click OK to close the dialog box.

Step 7: Generate Toolpaths

CAMWorks calculates toolpaths using the operation parameters and the feature's size and
shape.
1. Select one of the following options to generate toolpaths:
Right click Part Setup1 in the CAMWorks Operation tree and click Generate Toolpath on
the shortcut menu.
or
Click the Generate Toolpath button on the
CAMWorks toolbar. Clicking this toolbar button is the same as selecting the command
from the NC Manager level, regardless of the active item in the tree.
CAMWorks calculates the toolpaths for each operation in the Part Setup.
You can also generate toolpaths for each operation individually by right clicking on an
operation and clicking Generate Toolpath on the shortcut menu.
2. Highlight the first operation in the tree, hold down the Shift key, then highlight the last
operation.
The toolpaths for all the operations display on the part showing the centerline of the
toolpath.
3. Click an operation in the CAMWorks Operation tree.
The toolpath for that operation displays.
As you click each operation, the toolpaths for that operation are displayed.

Click the Entry Drill operation.

An Entry Drill operation was created automatically
for Rough Mill5 because you set the Entry Method
to Entry Drill.
The Entry Drill displays as a black circle on the
toolpath. The circle represents the diameter of the
drill. By default, the diameter of the drill used in the
Entry Drill is the same as the diameter of the mill
used in the roughing cycle. If a tool of the same size
is not available, a tool diameter of the next smallest
size is used.
The depth of the drill cycle for blind features is .02in
or .5mm off the bottom of the feature. For through
features, the depth of the drill is the same as the
feature.
Entry Drill operation parameters can be edited and the operation can be renamed,
moved, suppressed, deleted, etc.
CAMWorks provides the ability to simulate the toolpath showing the tool movement and the
resulting shape of the part.
5. Right click on Part Setup1 and select
Simulate Toolpath.
The Simulate Toolpath toolbar displays.
The toolbar controls allow you to:
Run the simulation in Tool or Turbo mode.
Display the simulated part, the design part and a comparison of the two.
In Tool mode, customize the display of the stock, tool and tool holder (wireframe,
translucent, shaded, or no display).
Run the simulation for all or selected operations.
When simulating an operation, the simulation can be for the current operation or for
all previous operations up to the selected operation.
Pause the simulation in either Tool or Turbo mode and dynamically change the
orientation of the part using zoom, pan, rotate, etc.
Control the simulation speed by dragging the Simulation Speed Control slider up or
down.
If you want to simulate only the toolpath for a given operation, you can right click that
operation, then select Simulate Toolpath.
4.

Click the Run button.

The simulation runs in Tool mode with the
tool displayed during simulation.
7.
Click the X button in the upper right
corner to cancel the simulation and return
to the SolidWorks display.
CAMWorks also provides the ability to step
through the toolpath using the Step Thru
Toolpath command.
8. Right click an operation in the tree and
select Step Thru Toolpath.
The Step Thru Toolpath toolbar displays.
6.

Single step

Forward multiple steps

Multiple step increment

Number of toolpath
segments to display

Click the Single Step button (single arrow) several times.

The active toolpath node is highlighted.
10. Set the Multiple step increment to 5 and click the Forward multiple steps button (double
arrow) several times.
11. Click the Goto End button. The toolpath is completed.
12.
Click the X button in the upper right corner to close the dialog box.
9.

Did You Know ...

CAMWorks provides an option to display the XYZ position of the tool in the
Message Window during Simulation and Step Thru Toolpath. To activate this
option, select the Options command on the CAMWorks menu or the NC Manager
shortcut menu. On the General tab, select the Message Window option. On the
Simulation tab, select the Cutter Coordinates in Message Window option.

Step 8: Post Process Toolpaths

Post processing is the final step in generating the NC program file. This step translates
generalized toolpath and operation information into NC code for a specific machine tool
controller. CAMWorks creates NC code for each toolpath in the order the operation appears
in the CAMWorks Operation tree. When you post process a part, CAMWorks creates two
files: the NC program and the Setup Sheet. These are text files that you can read, edit and
print using a word processor or text editor.

In this exercise, you post process all the operations and generate the NC program:
1. Click the Post Process button on the CAMWorks
toolbar.
or
Right click NC Manager in the Operation tree and click Post Process on the shortcut
menu.
The Post Output File dialog box
displays so you can name the NC
program file.
Typically, the NC program and
Setup Sheet files are stored in the
folder that contained the last part
that was opened. If you want these
files in another location, you can
change the folder.
If you are running CAMWorks in
Demo mode, the Post Output File
dialog box does not display because you cannot save NC code in Demo mode.
If the Post Process command is grayed out on the CAMWorks menu or on a shortcut
menu, make sure that you have selected a post processor and generated the toolpaths.
2. Click the down arrow to the right of the Save as type box.
CAMWorks provides a list of commonly used extensions that you can select. For this
exercise, use the txt extension.
Did You Know ...

If you want change the default extension from txt to one of the ones in the list or if
you want a different file name extension for NC program files, you can edit or create
a .pinf file and specify the new extension. For more information on making these
changes, see the online Help.
3.

If cwex1 is not in the File name text box, type cwex1, then click Save.
You do not have to type the extension if you are using the default .txt. Naming the post
output file the same as the part file is the most common way of saving parts and NC
programs. Both files can have the same name because they have different extensions.

4.

5.
6.
7.

8.

The Post Process Output dialog box

displays.
Click the Step button on the control bar
at the top.
CAMWorks starts to generate the NC
program and the first line of NC code
displays in the NC code output view box.
The post processing mode is set to post
process one line of code at a time (Step
mode).
Click the Step button. The next line of
NC code displays.
Click the Run button. Post processing
continues until it is completed.
When the post processing is finished,
view the code using the vertical scroll
bar.
Click OK to close the Post Process
Output dialog box.
More About Setup Sheets

Step Run

The Setup Sheet is a printable file that contains information the

machine tool operator can use to set up the part and the tools
required to produce a part. The information includes
the machine, the controller, estimated machine time, the part
material, and the tooling used to machine the part.
CAMWorks provides two methods for creating Setup Sheets:
During post processing, CAMWorks automatically creates a
simple text file with a
.set extension.
The Setup Sheet command on the NC Manager shortcut
menu allows you to generate a Setup Sheet that is based on
an Access database report template and store the information
in the Report Database to view at any time. CAMWorks
supplies several report templates that can be used as is. You
can also open the Report Database in Access and create
customized reports based on these templates or design your
own original reports.