Series 20

Axial Piston Pumps

Technical
Information

Series 20 Axial Piston Pumps

Technical Information
General Description
INTRODUCTION

Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial
piston pumps.

DESCRIPTION

Sauer-Danfoss axial piston variable displacement pumps are of swash plate design with
variable flow capability suitable for hydrostatic transmissions with closed loop circuit.
Tilting the swash plate to the opposite side of the neutral or zero displacement position
reverses flow direction.
Sauer-Danfoss axial piston variable displacement pumps are well engineered and easy to
handle.
The full-length shaft with a highly efficient tapered roller bearing arrangement offers a
high loading capacity for external radical forces.
The hydro-mechanical servo displacement control maintains the selected swash plate
position and hence pumps displacement.
Upon release of the control handle, the swash plate automatically returns to zero
position and the flow reduces to zero.
High case pressures can be achieved without leakage even at the lowest temperatures
by using suitable shaft seals.
The servo valve arrangement offers the facility to incorporate function regulators and
remote control systems.
Axial piston units are designed for easy servicing. Complete dismantling and reassembly
can be carried out with standard hand tools, and all components or sub-assemblies are
replaceable.
Axial piston variable displacement pumps of the Sauer-Danfoss pattern are made by
licensed producers worldwide, providing consistent service and fully interchangeable
parts.

TYPICAL MARKETS

Industrial
Mining
Transit Mixer
Utility Vehicles

2003 Sauer-Danfoss. All rights reserved.

Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.
Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products
already ordered provided that such alterations arent in conflict with agreed specifications. All trademarks in
this material are properties of their respective owners. Sauer-Danfoss and the Sauer-Danfoss logotype are
trademarks of the Sauer-Danfoss Group.
Front cover illustrations: F005 104, F000 248, F000 150, F000 249

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Contents
GENERAL DESCRIPTION

Introduction ..................................................................................................................................................... 2
Description ....................................................................................................................................................... 2
Typical markets ............................................................................................................................................... 2

SECTIONAL VIEW

Axial piston variable displacement pump............................................................................................. 4

SYSTEM CIRCUIT
DESCRIPTION

Pump and motor circuit description ....................................................................................................... 5

Pump circuit schematic................................................................................................................................ 5

TECHNICAL
SPECIFICATION

Technical parameters.................................................................................................................................... 6
Design........................................................................................................................................................... 6
Type of mounting ..................................................................................................................................... 6
Pipe connections ...................................................................................................................................... 6
Direction of rotation ................................................................................................................................ 6
Installation position ................................................................................................................................. 6
External drain fluid loss .......................................................................................................................... 6
Hydraulic parameters.................................................................................................................................... 7
System pressure range, input p1 .......................................................................................................... 7
System pressure range, output p2 ....................................................................................................... 7
Case pressure ............................................................................................................................................. 7
Hydraulic fluid............................................................................................................................................ 7
Hydraulic fluid temperature range..................................................................................................... 7
Viscosity range........................................................................................................................................... 7
Filtration ....................................................................................................................................................... 7
Shaft load..................................................................................................................................................... 7
Determination of nominal pump size ............................................................................................... 8
Servo displacement control (linear response) ..................................................................................... 9
Pump flow direction ................................................................................................................................ 9
Reversing time .........................................................................................................................................10
Reset time..................................................................................................................................................11
Changing reversing and reset time..................................................................................................11

DIMENSIONS FRAME
SIZE 070 AND 089

Outline drawing, configuration PS, displacement control VML 1................................................12

Tapered shaft end ........................................................................................................................................15
Pump configuration AA 010, displacement control VML 1 ...........................................................15

DIMENSIONS FRAME
SIZE 334

Pump configuration PS, displacement control VML 1.....................................................................17

Pump configuration AA 010, displacement control VML 1 ...........................................................19

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Sectional View
AXIAL PISTON VARIABLE DISPLACEMENT PUMP
Swash plate

Control handle

Servo valve (control valve)

Charge pump

Input shaft

Charge check valve

Shaft seal
Cylinder block assembly

[Link].315.A1.02 520L0517

Servo cylinder

P005 121E

Series 20 Axial Piston Pumps

Technical Information
System Circuit Description
PUMP AND MOTOR CIRCUIT DESCRIPTION
HEAT EXCHANGER BYPASS VALVE
RESERVOIR
VACUUM GAUGE

CONTROL
HANDLE

HEAT EXCHANGER
SERVO CONTROL CYLINDER

REVERSIBLE VARIABLE
DISPLACEMENT PUMP

SERVO
PRESSURE
RELIEF VALVES

PUMP SWASHPLATE

FIXED
DISPLACEMENT MOTOR

PURGE RELIEF VALVE

CHARGE PRESSURE
RELIEF VALVE

LOOP FLUSHING VALVE

INPUT SHAFT

MOTOR SWASHPLATE

SERVO CONTROL CYLINDER

WORKING LOOP (LOW PRESSURE)

WORKING LOOP (HIGH PRESSURE)

OUTPUT SHAFT

CONTROL FLUID

SUCTION LINE

CASE DRAIN FLUID

P000 027E

Above figure shows schematically the function of a hydrostatic transmission using an

axial piston variable displacement pump and a fixed displacement motor.
PUMP CIRCUIT
SCHEMATIC

M
4

vo

r
Se

B
L1
L2
7

S
6

Designation:
1
=
2
=
3
=
4
=
5
=
6
=
7
=

Variable displacement pump

Charge pump
Servo control valve
Charge check valve
Charge relief valve
Filter
Heat exchanger

Ports:
A, B
=
Main pressure ports
(working loop)
S
=
Suction port - charge pump
L1 , L2 =
Drain ports
M
=
Gauge port - charge pressure

P000 012

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
TECHNICAL PARAMETERS

Design
Axial piston pump of swash plate design, with variable displacement.
Type of mounting
SAE four bolt flanges.
Pipe connections
Main pressure ports: SAE split flange
Remaining ports:
SAE O-ring boss
Direction of rotation
Clockwise or counterclockwise (viewing from the input shaft).
Installation position
Optional; pump housing must be always filled with hydraulic fluid.
External drain fluid loss
28

334

Typical values for 350 bar [5076 psi]

and 18 swashplate angle

24
20

5
4
3
2
1
0

External drain fluid loss (l/min)

(US gal/min)

16

12
089
8

070

0
0

1000

2000

3000

4000

Driveshaft speed n (min-1) (rpm)

P005 105E

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
HYDRAULIC
PARAMETERS

System pressure range, input p1

Variable displacement pump:
Charge pressure nominal: 13 bar [189 psi] above case pressure
Charge pressure minimum: 8 bar [116 psi], intermittent only
Charge pump input pressure:
Min. allowable pressure, continuous
Min. allowable pressure, intermittent

=
=

0.75 bar [10.9 psi] absolute

0.50 bar [7.3 psi] absolute (for cold start)

Charge pump output pressure:

Max. operating pressure = 35 bar [508 psi] above case pressure
System pressure range, output p2
Pressure on port A or B: Max. operating pressure p = 420 bar [6092 psi]
Max. high pressure setting p = 460 bar1 [6672 psi]
1

only with POR-valve

Case pressure
Max. rated pressure =
Intermittent
=

2.5 bar [36.3 psi]

5.0 bar [72.5 psi]

Hydraulic fluid
Refer to Sauer-Danfoss publications Hydraulic Fluids and Lubricants and Experience with
Bio Fluids for biodegradable hydraulic fluids.
Hydraulic fluid temperature range
min = - 40 C [- 40 F]
max = 95 C [203 F]
Viscosity range
min = 7 mm2/s [49 SUS*]
max = 1000 mm2/s [4630 SUS*] (intermittent cold start)
Recommended viscosity range: 12 - 60 mm2/s [66 - 280 SUS*]
*SUS (Saybolt Universal Second)

Filtration
Required cleanliness level: ISO 4406 - 1999 Code 22/18/13 or better. Refer to SauerDanfoss publication Hydraulic Fluids and Lubricants and Design Guideline for Hydraulic
Fluid Cleanliness.
Shaft load
The pump will accept radial and axial loads on its shaft, the maximum capacity being
determined by direction and point of application of the load.
Please contact your Sauer-Danfoss representative.

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
HYDRAULIC
PARAMETERS
(continued)

Technical data
Frame size

Max. displacement

cm
[in3]

Charge pump displacement

cm
[in3]

070

089

334

69.8
[4.26]

89.0
[5.43]

333.7
[20.36]

options

Minimum speed

min-1 (rpm)

Rated speed 1

min (rpm)

Mass moment of inertia of rotating group

(without charge pump)

3200

degree

12.30
[0.75]

2900

1900

18

kg m2 10-3
[lbf ft2 10-3]

12.34
[292.8]

17.77
[421.7]

161.40
[3830.0]

kg
[lb]

63
[139]

78
[172]

270
[595]

Weight
1

65.50
[4.00]

500

-1

Maximum swash plate angle

18.03
[1.10]

for higher speeds contact your SauerDanfoss reprezentative

Determination of nominal pump size

Unit:

Metric system:

Inch system

Pump
output
flow

Vg n v
Q =
1000

l/min

Vg n v
Q =
231

[gpm]

Input torque

Vg p
M =
20 m

Nm

Vg p
M =
2 m

[lbfin]

Input power

Vg n p
P =
600 000 t

kW

Vg n p
P =
396 000 t

[hp]

Efficiency characteristic curves available on request.

Vg = Pump displacement per revolution

n = Pump speed
p = Hydraulic pressure differential
p = pHD - pND
v = Pump volumetric efficiency
m = Pump mechanical efficiency
t = Pump total efficiency
pHD = High pressure
pND = Low pressure

[Link].315.A1.02 520L0517

cm3 [in3]
min-1 (rpm)
bar [psid]

bar
bar

[psid]
[psid]

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
SERVO DISPLACEMENT
CONTROL
(LINEAR RESPONSE)

Regulated by the control handle on the servo valve, the swash plate can be infinitely
varied in both directions with the help of the servo system.
The pump displacement resulting from any control handle position can be established
using the figures on this page.
The angle of the control handle for stroke initiation and for the final position of the
stroke can vary from unit to unit within the range of the tolerance band.
The inter-relation of flow direction, rotation of the pump and the control handle
movement is shown below.
Pump flow direction
Flow direction changes with the direction of rotation and the control handle movement
(see above).
C

D
Null position

Maximum
displacement

Maximum displacement
Control handle

Serrated shaft
P000 013E

Movement of control
handle in direction

Pump rotation
Counterclockwise (L)
Clockwise (R)

Pressure port
OUT

Pressure port
IN

A
89.0

69.8
60

Vg [cm3]

40

25.7

20
15

23.5 20

60

[]

40

[]

80

Vg [cm3]

10

5 3 0.5
0.5 3 5

10

20 23.2

15

25.7

29.5

27 25

20

5 3 0.5
0.5 3 5

10

60

Vg [cm3]

80

25 27

20

29.5

[]

40

60

15

40

20
10

20

[]

20

15

Vg [cm3]

89.0

69.8
P000 016

SPV 2/070

P000 017

SPV 2/089

333.7
300

Vg [cm3]

250
200
150
100

[]

29.2 26.7

25

20

50
15

10

5 3 0.5
50

0.5 3 5

10

15

25 26.2

20

29.2

[]

100
150
200
250
300

Vg [cm3]

333.7

SPV 2/334
[Link].315.A1.02 520L0517

P000 021

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
SERVO DISPLACEMENT
CONTROL
(LINEAR RESPONSE)
(continued)

Reversing time
Time for the directional change of the flow from Qmax , across zero to Qmax , depending
on the size of the control orifice fitted in the supply port to the servo valve (see below).
The values given assume movement of the control handle directly from one end position
to the other.
Adjustment time of handle: < minimum reserving time
Operating pressure:
p2 = 210 bar [3046 psi]
Speed:
n = 1450 min-1 (rpm)
System temperature:
50 C [122 F]
Viscosity:
35 mm2/s [164 SUS]
Frame size

Minimum reversing time (s)

without orifice

Maximum reversing time (s)

with orifice 0.66 in supply port

070

1.0

9.3

089

1.1

9.0

334

5.6

43.8

Schematic diagram of servo valve with alternative orifice positions

Orifices in the
pilot ports

Supply port with orifice

P000 056E

10

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Technical Specification
SERVO DISPLACEMENT
CONTROL
(LINEAR RESPONSE)
(continued)

Reset time
Time for reducing the flow from either flow direction from Qmax to 0 releasing the
control handle.
Assuming no mechanical blockage of the control handles free return and assuming no
orifices in the pilot ports:
Operating pressure:
p2 = 210 bar [3046 psi]
System temperature:
50 C [122 F]
Viscosity:
35 mm2/s [164 SUS]
Frame size

Minimum reset time (s)

070

3.0

Pilot ports

089
334

Servo valve counter bored recesses for

orifice insert

5.4

Orifice in supply port

(see table on page 10)
P000 057E

Changing reversing and reset time

Inserting one orifice in each of the pilot ports can extend the reversing time. The reset
time will also be extended.
Inserting an orifice in one of the pilot ports only can extend the reversing time in one
flow direction. The reset time will be extended only for this flow direction.

[Link].315.A1.02 520L0517

11

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 070 and 089 cm3
OUTLINE DRAWING,
CONFIGURATION
PS, DISPLACEMENT
CONTROL VML 1

View Z
*
**

Minimum and maximum angle , (see section

servo displacement control).
Shaft spline data: spline shaft with involute
spline, according to SAE handbook, 1963,
class 1, fillet root side fit.

D
Null position
*

Maximum
displacement

+0.3
- 0.2

Maximum
displacement

6.73 0.1

19

Control handle

R 50.8
R 25.4
Serrated shaft
P000 022E

Port "L1": Case drain port

(use highest port as outlet)
B
J

Gauge port - servo cylinder pressure

(both sides) 7/16-20 UNF-2B
SAE straight thread
O-ring boss

K
L
M
56

20
28.4

68.3

Port "S"

36.6

27.79

Counterclolcwise (L) Clolcwise (R)

rotation
rotation

57.15

M10

Charge pressure
relief valve

127 - 0.05

Coupling may not protrude

beyond 48 mm maximum
lenght of full spline

Port "B"
H

12.45 0.24

Approximate
centre of gravity

Shaft spline data:**

Pitch
=P
Pressure angle = 30
Number of teeth = R
Pitch
=S

E
D
C
A
P005 106E

12

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 070 and 089 cm3
View Y
U
Case drain port

Gauge port servo cylinder

pressure

V
96

Port "S":
Suction port
(charge pump)

19

Port "L1":
Case drain port

Position of charge pump for

clockwise (R) rotation

Port "A"

OUTLINE DRAWING,
CONFIGURATION
PS, DISPLACEMENT
CONTROL VML 1
(continued)

Position of charge pump for

counterclockwise (L) rotation

Gauge port "M"

Port "L2":
Case drain port

Port "B"
Y
Port "B"

Y
Port "A"
U
Case drain port

P005 107E

Max. torque for charge pump inlet port (7/8 -14 UNF - 2B) is 22 - 28 Nm [195 - 248 lbfin].
Frame size
070

089

Port A and B
SAE flange, size 1
SAE split flange boss
5000 psi
4 threads
3/8-16 UNC-2B
18 deep

[Link].315.A1.02 520L0517

Port L1 and L2

Port S

7/8-14 UNF-2B
SAE straight thread
O-ring boss

Port M

7/16-20 UNF-2B
SAE straight thread
O-ring boss

13

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 070 and 089 cm3
OUTLINE DRAWING, CONFIGURATION PS, DISPLACEMENT CONTROL VML 1 (continued)
View X (for SPV 2/070 only)

View X (for SPV 2/089 only)

Control handle shaft
spline data: 64/128 pitch,
64 diametral pitch acc.
to SAE handbook 1963
Outside diameter = 10.13 - 0.14
Number of teeth = 24

DD
EE
9.4 0.24
Control
handle

Z
CC

15

GG

78

Rotation
L
16

R
Z

62

FF

BB

AA

AA
Z

62

GG

1/4 - 20 UNC - 2A

CC

BB
FF

Control
handle

45

45

16
2

EE
9.4 0.24

1/4 - 20 UNC - 2A

Rotation
L

Control handle shaft

spline data: 64/128 pitch,
64 diametral pitch acc.
to SAE handbook 1963
Outside diameter = 10.13 - 0.14
Number of teeth = 24

DD

62
GG

GG

62

78

Approximate
centre of gravity

Approximate
centre of gravity
0.8
15 + 0.3
0.8
15 + 0.3

21
6

167

JJ

JJ
HH

HH

HH

HH
P005 108E

Dimensions
Frame
size

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

315
[12.402]

294
[11.575]

305
[12.008]

259
[10.197]

188
[7.402]

146
[5.748]

112
[4.409]

120
[4.724]

84
[3.307]

48
[1.890]

16
[0.630]

84
[3.307]

089

328
[12.913]

307
[12.087]

312
12.283]

271
[10.669]

195
[7.677]

140
[5.512]

118
[4.646]

129
[5.079]

91
[3.583]

49
[1.929]

17.5
[0.689]

98
[3.858]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

mm
[in]

AA

mm
mm
BB
[in]
[in]

CC

mm
mm
DD
[in]
[in]

EE

mm
[in]

070

71.4
[2.811]

112.7
[4.437]

105
[4.134]

108
[4.252]

60.5
[2.382]

85.8
[3.378]

9.5
[0.374]

187.6
[7.386]

162
[6.378]

128.6
[5.063]

133
[5.236]

113
[4.449]

089

77.7
[3.059]

128.7
[5.067]

115
[4.528]

119
[4.685]

65
[2.559]

95.2
[3.748]

12.7
[0.500]

198.6
[7.819]

173
[6.811]

139.6
[5.496]

144
[5.669]

123
[4.843]

Frame
size

FF

mm
mm
mm
GG
HH
[in]
[in]
[in]

JJ

mm
[in]

A1

mm
[in]

Charge pump

cm3
[in]

12
[0.732]

18
[1.098]

Shaft spline

mm
[in]

mm
[in]

Bore diameter for

shaft coupling
mm
[in]

mm
[in]

070

126
[4.961]

123
[4.843]

130
[5.118]

194
[7.638]

372
[14.646]

381
[15.000]

34.50 - 0.17
[1.358 - 0.0067]

33.338
[1.313]

21
[0.827]

16/32

31.75 + 0.062
[1.250 + 0.0024]

089

140
[5.512]

134
[5.276]

148
[5.827]

194
[7.638]

358
[14.094]

394
[15.512]

37.68 - 0.17
[1.483 - 0.0067]

36.513
[1.438]

23
[0.906]

16/32

34.95 + 0.062
[1.376 + 0.0024]

Short version available on request. Please contact your local Sauer-Danfoss representative.

14

070

Frame
size

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 070 and 089 cm3
57.9 max

TAPERED SHAFT END

Depth, keygroove: 5,7 + 0,1

Shaft, cone:
1 :8

32.5 0.7
22.4 0.7

26

31.75

Frame size 033-070 = 84

Frame size
089 = 98

Key A 9.525 x 9.525 x 31.75

1-20 UNEF-2B
Wrench size: 38

Coupling may not protrude beyond

81 mm maximum lenght of shaft
P000 006E

PUMP CONFIGURATION
AA 010, DISPLACEMENT
CONTROL VML 1

1
3

M
4

rv

Se

Control and charge

pressure port

Return from charge relief

valve to pump case

Designation:
1
=
Variable Displacement pump
3
=
Servo control valve
4
=
Charge check valve
7
=
Heat exchanger
Ports:
A, B =

B
L1

L1, L2 =
M
=

L2

Main pressure ports

(working loop)
Drain ports
Gauge port - charge pressure

P000 058E

[Link].315.A1.02 520L0517

15

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 070 and 089 cm3
PUMP CONFIGURATION AA 010, DISPLACEMENT CONTROL VML 1 (continued)

29

Control and charge

pressure port R 3/4

34

B
Return from charge relief
valve to pump case R 3/4

A
P000 009E

Dimensions

16

Frame Size

A mm [in]

B mm [in]

Weight kg [lb]

070

339 [13.346]

316 [12.441]

63.5 [140]

089

352 [13.858]

329 [12.953]

78.5 [173]

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 334 cm3
*
**

Minimum and maximum angle , (see section

servo displacement control).
Shaft spline data: spline shaft with involute
spline, according to SAE handbook, 1963,
class 1, fillet root side fit.

View Z
C

*
in.
26.7m
Maximum
displacement

Null position
*
26.7m
in.
Maximum
displacement

+0.3
- 0.2

6.73 0.1

19

Control handle

R 50.8
R 25.4
Serrated shaft
P000 026E

578
244

Port "L1": Case drain port

(use highest port as outlet)

208

Gauge port - servo cylinder pressure

(both sides) 7/16-20 UNF-2B
SAE straight thread
O-ring boss
Charge pressure
relief valve

198
77

25.5

Coupling may not protrude

beyond 48 mm maximum
lenght of full spline

30.2
2.12
58.7

79.4

M 16

64.66 - 0.16

114

36.5

177.8 - 0.05

PUMP CONFIGURATION
PS, DISPLACEMENT
CONTROL VML 1

30

Port "S":
Charge pump
suction port

40.5

15.6 0.24

Port "B"

86
246

Shaft spline data:**

Pitch
Pressure angle
Number of teeth
Pitch

= 63.500
= 30
= 27
= 16/32

Internal opening
for grooving

= 61.93 + 0.062

Approximate
centre of gravity

311
433
475
493
656

P005 115E

[Link].315.A1.02 520L0517

17

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 334 cm3
PUMP CONFIGURATION PS, DISPLACEMENT CONTROL VML 1 (continued)
View Y
Gauge port servo cylinder
pressure

187.2
Case drain port
164
96

View X
174
153
Position of charge pump for
clockwise (R) rotation

9.4 0.24
Control handle

Control handle shaft

spline data: 64/128 pitch,
64 diametral pitch acc.
to SAE handbook 1963
Outside diameter = 10.13 - 0.14
Number of teeth = 24
1/4 - 20UNC - 2A

225

216

17.5

247

Port "A"

190.6

116
95.8

Rotation
L

249.6

Charge pump pressure

gauge port
7/16-20 UNF-2B
SAE straight thread
O - ring boss

45

170.2

Port "L1":
Case drain port

Gauge port "M"

50

216

116

17.5

Approximate
centre of gravity
Port "L2":
Case drain port

Port "B"
81
Port "S"
158.7
Port "B"

27.7 0.6

300
158.7
Port "A"
187.2
Case drain port

Position of charge pump for

counterclockwise (L) rotation

212

212

P005 111E

Frame size

334

18

Port A and B
SAE flange, size 1 1/2
SAE split flange boss
6000 psi
4 threads
5/8-11 UNC-2B
35 deep

Port L1 and L2

Port S

Port M

1 7/8-12 UNF-2B
SAE straight thread
O-ring boss

SAE flange, size 1 1/4

SAE split flange boss
3000 psi
4 threads
7/16-14 UNC-2B
28 deep

7/16-20 UNF-2B
SAE straight thread
O-ring boss

[Link].315.A1.02 520L0517

Series 20 Axial Piston Pumps

Technical Information
Dimensions Frame Size 334 cm3
PUMP CONFIGURATION
AA 010, DISPLACEMENT
CONTROL VML 1

1
3

M
4

o
rv
Se

Control and charge

pressure port

Return from charge relief

valve to pump case

Designation:
1
=
Variable Displacement pump
3
=
Servo control valve
4
=
Charge check valve
7
=
Heat exchanger
Ports:
A, B =

B
L1

S
=
L1, L2 =
M
=

L2
7

Main pressure ports

(working loop)
Suction port - charge pump
Drain ports
Gauge port - charge pressure

P000 058E

73

Return from charge relief

valve to pump case R 3/4

Control and charge

pressure port R 3/4
2

60

B
A
P000 010E

Dimensions
Frame size

A mm [in]

B mm [in]

C mm [in]

Weight kg [lb]

334

546 [21.496]

520 [20.472]

21 [0.827]

264.5 [583]

[Link].315.A1.02 520L0517

19

OUR PRODUCTS

Sauer-Danfoss Mobile Power and Control Systems

Market Leaders Worldwide

Hydrostatic transmissions
Hydraulic power steering

Sauer-Danfoss is a comprehensive supplier providing complete

systems to the global mobile market.

Electric power steering

Electrohydraulic power steering
Closed and open circuit axial piston
pumps and motors
Gear pumps and motors
Bent axis motors
Orbital motors
Transit mixer drives
Planetary compact gears
Proportional valves
Directional spool valves
Cartridge valves

Sauer-Danfoss serves markets such as agriculture, construction, road

building, material handling, municipal, forestry, turf care, and many
others.
We offer our customers optimum solutions for their needs and
develop new products and systems in close cooperation and
partnership with them.
Sauer-Danfoss specializes in integrating a full range of system
components to provide vehicle designers with the most advanced
total system design.
Sauer-Danfoss provides comprehensive worldwide service for its
products through an extensive network of Authorized Service
Centers strategically located in all parts of the world.

Hydraulic integrated circuits

Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Electric motors and inverters
Joysticks and control handles
Displays
Sensors

Sauer-Danfoss (US) Company

2800 East 13th Street
Ames, IA 50010, USA
Phone: +1 515 239-6000, Fax: +1 515 239 6618
Sauer-Danfoss (Neumnster) GmbH & Co. OHG
Postfach 2460, D-24531 Neumnster
Krokamp 35, D-24539 Neumnster, Germany
Phone: +49 4321 871-0, Fax: +49 4321 871 122
Sauer-Danfoss (Nordborg) A/S
DK-6430 Nordborg, Denmark
Phone: +45 7488 4444, Fax: +45 7488 4400

[Link].315.A1.02 520L0517

[Link]