MTW SERIES

Multiple outputs/for general use 15-60W

DENAN
Built to meet
UL60950-1/
CSA C22.2 No.60950-1

EN60950-1/
EN50178

Low Voltage Directive Electrical Appliance

and Material Safety Law
(Input Voltage 100VAC)

Y
E
A
R
S

warranty

Model naming logic

MTW 15-5 12 12

Features
Worldwide-applicable input, triple-output type

Variation

C ompact, slim and lightweight contributing to

-V: With output voltage trim-mer

energy-saving and environmental protection

Nominal output voltage(output 3)

12: 12V
15: 15V

A pproved by safety standards (UL, C-UL, TV),

complying with Electrical Appliance and Material

Nominal output voltage(output 2)

12: 12V
15: 15V

Safety Law, CE marking applicable

E
 MI: Complying with FCC Class B, VCCI-B,

Nominal output voltage(output 1)

5: 5V

EN55011-B, -B

Rated capacity

Immunity : Complying with EN61000-4-2,-3,-4,-5,

15: 15W
30: 30W
60: 60W

-6,-8,-11

Series name

Peak load accommodatable

Conformity to RoHS Directive

Applications

This means that, in conformity with EU Directive 2002/95/

EC, lead, cadmium, mercury, hexavalent chromium, and
specific bromine-based flame retardants, PBB and PBDE,
have not been used, except for exempted applications.

Product line up
Output voltage

15W

30W

60W

Output current (Peak current)/Model

Output current (Peak current)/Model

Output current (Peak current)/Model

+5V

2.0A3.0A

+12V

0.3A0.6A

-12V

0.2A0.3A

Output voltage

3.0A4.5A
MTW15-51212

1.2A2.0A

5.0A7.0A
MTW30-51212

0.3A0.45A

2.5A3.5A

MTW60-51212

0.5A0.7A

15W

30W

60W

Output current (Peak current)/Model

Output current (Peak current)/Model

Output current (Peak current)/Model

+5V

2.0A3.0A

+15V

0.3A0.6A

-15V

0.2A0.3A

Variation symbol

Function

None

Fixed output voltage type

-V

Output voltage adjustable type

3.0A4.5A
MTW15-51515

0.8A2.0A
0.3A0.45A

5.0A7.0A
MTW30-51515

2.0A3.5A

MTW60-51515

0.5A0.7A

Output voltage adjustable type: Indicated by "-V" added at the end of model

All specifications are subject to change without notice.

001-01/20080522/etl_mtw

MTW 15W

MTW15W
ITEMS/UNITS

MTW15W Specifications
MODEL
CH

Voltage Range (Nominal: 100-240VAC)

Frequency
(Nominal: 50-60 single phase)
Power Factor (100/240VAC)(typ)
Input
Efficiency (100/240VAC)(typ)
Current (100/240VAC)(typ)
Inrush Current (100/240VAC)(typ) (*1)
Leakage Current(max)
Nominal Voltage
(*2)
Maximum Current
(*3)
Maximum Peak Current
(*4)
Maximum Power
(P0[V1]+P0[V2]+P0[V3])
Voltage Setting Accuracy
(100/240VAC,100% load)
Maximum Line Regulation
(Within input voltage range)(max)
Maximum Load Regulation
Output
(10-100% load)(max)
Temperature Coefficient
(Ambient temperature -10 C to +50 C)(max)
Warm Up Drift (max)
(*5)
Max Power Total Regulation (max) (*2)
Maximum Ripple Voltage (max) (*6)
Maximum Ripple & Noise (max) (*6)
Start Up Time (100VAC)(max)
Hold-up Time (100/240VAC)(typ)
Voltage Adjustable Range
(*7)
Over Current Protection (min) (*8)
Over Voltage Protection (min) (*9)
Over Temperature Protection
Remote Sensing
Function Remote ON/OFF Control
Parallel Operation
Series Operation
Operation Indicator
Monitoring Signal
Operating Temperature
Storage Temperature
Operating Humidity
Environment Storage Humidity
Vibration
Shock
Withstand Voltage
Isolation
Isolation Resistance

Safety Standards
Standards
EMI
Immunity
Weight (max)
Mechanical
Size (W x H x D)

MTW15-51212
2

AC85-265

Hz

47-440

MTW15-51515
2

0.55/0.45

A
A
mA
VDC
A
A

71/70

68/70
0.42/0.25
25/50
0.75 (100VAC (Electrical Appliance and Material Safety Law) / 240VAC (UL, IEC))
+5 [V1]
+12 [V2]
-12 [V3]
+5 [V1]
+15 [V2]
-15 [V3]
2
0.3
0.2
2
0.3
0.2
3
0.6
0.3
3
0.6
0.3

16
+5 0.25

17.5

+12 0.6

-12 0.6

+5 0.25

+15 0.6

-15 0.6

0.4%
2.0%

1.0%

mVp-p
mVp-p
ms
ms
VDC
A
VDC

2.0%

1.0%

1.0
2.0

1.0

2.0

1.0

2.0

2.0
100
120

120
150

100
120

120
150

100
20/150
Fixed/Variable (CH1)
3.15
0.63
0.32
3.15
0.63
0.32
5.7
Not available
5.7
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available

-10 to +60

-30 to +75
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
5-10Hz, 10 minutes sweep, 10mmp-p total amplitude, 3 directions, 1h for each, in non-operation
10-200Hz, 10 minutes sweep, 19.6m/s (2G) acceleration, 3 directions, 1h for each, in non-operation
588m/s (60G), 11 5ms, 3 directions, 3 times for each, in non-operation
For 1 minute at ordinary temperature and humidity
Between input terminal and ground terminal: 2.0kVAC, 10mA cutout current
Between input terminal and output terminal: 3.0kVAC, 10mA cutout current
Between output terminal and ground (G): 500VAC, 20mA cutout current
In 500VDC and 100M or over at ordinary temperature and humidity
Between input terminal and ground terminal, between input terminal and output terminal,
and between output terminal and ground terminal
Approved by UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (TV),
complying with Electrical Appliance and Material Safety Law
(meeting the regulations of creepage surface and spacial distance in item 8 of the appendix table)
Complying with FCC-Class B / VCCI-Class B / EN55011-B / EN55022-B
Complying with EN61000-4-2 Level 4, -3 Level 3, -4 Level 3, -5 Level 4, -6 Level 3, -8 Level 4, -11
g
150
mm
26 x 50 x 127

With nominal input/output voltage, maximum output current, and Ta=25

C, if not specified separately.
(*1) In primary surge current, 25
C, and cold starting.
(*2) Overshoot in starting input is 4%typ. Floating system is used for V1-V2 and V1-V3.
(*3) The maximum output current value is between -10
C and +50
C. For use in outside this temperature range, derating is needed.
(*4) Flowing time should be within 10 seconds and the effective current/power should be the same as or less than the maximum
current/power.
(*5) 30min to 8h after the start of input voltage application.
(*6) In 100MHz, -10C-0C. Ripple: V1-140mVp-p max, V2, V3-160mVp-p max. Ripple noise : V1-160mVp-p max, V2/V3-180mVp-p max.
(*7) For output voltage adjustable types (variation), output voltage can be varied in the range of +5V through +5.25V for CH1 (+5V)
only, by the output voltage trimmer.
(*8) When the other channels are in 0A. Fold-back type drooping system and automatically resumes when the causes are removed.
(*9) For V1 only: Zener clamp system

All specifications are subject to change without notice.

Recommended EMC Filter

RSEL-2001W
Please refer to "TDK-Lambda
EMC Filters" catalog.

MTW 15W
Outline Drawing

UP
1

Name plate

7MAX.

7max.
5

6max.

(4.5)
B

Ground pattern/Spacer area

Solder side (1 location point)
Area for mounting screw
Side with components (1 location point)
Spacer area
Solder side (3 location points)
Area for mounting screw
Side with components (3 location points)

Unit: mm
Allowable dierence is 1mm if not specied separately.

CN1Input side

CN51Output side
P8 V3 Output 3

Ground
L

3max.

8
7
6
5
4
CN51
3
2
1

3 CN1

P1

23
(1.6)

CN51

7max.

6max.

3MAX.

OUTPUT
Area for mounting
components CONNECTOR
8

Output voltage trimmer (option)

UP

Specications of terminals

P3 N

P5

7MAX.
34.1

7MAX.

7MAX.

CN51
4.5

12.2

3.5

23
1.6

( )
1 3.5

(4)

(17.6)

50

1
4

Mounting hole

4-3.5
Output connector

CN1 3
5

1200.5

INPUT CONNECTOR
5

17.6
7MAX.

430.5

50

(3.5)
430.5
3.5

127

4.5

3.5

3.5

CN1

7MAX.

7MAX.
Input connector

4-3.5

3.5

1200.5

(12.2)

3.5

Name plate

127

7MAX.

MTW15W

P7

Neutral

P6

Live

G2 Ground 2

P5 V2 Output 2

- VH series B3P5-VH-B
by J.S.T. Mfg. Co., Ltd.

P4
P3
P2
P1

G1 Ground 1
V1 Output 1

- XH series B8B-XH-2
by J.S.T. Mfg. Co., Ltd.

Maximum output power (%)

Output Power - Ambient Temperature (Derating Curve)

Shows derating for products without

covers.
For (A)-(F), refer to the item regarding

Ambient temperature (
C)
In the range indicated by
, operation is
possible but the characteristics are not guaranteed.
All specifications are subject to change without notice.

MTW 30W

MTW30W
ITEMS/UNITS

MTW30W Specifications
MODEL
CH

Voltage Range (Nominal: 100-240VAC)

Frequency
(Nominal: 50-60 single phase)
Power Factor (100/240VAC)(typ)
Input
Efficiency (100/240VAC)(typ)
Current (100/240VAC)(typ)
Inrush Current (100/240VAC)(typ) (*1)
Leakage Current (max)
Nominal Voltage
(*2)
Maximum Current
(*3)
Maximum Peak Current
(*4)
Maximum Power
(P0[V1]+P0[V2]+P0[V3])
Voltage Setting Accuracy
(100/240VAC,100% load)
Maximum Line Regulation
(Within input voltage range)(max)
Maximum Load Regulation
Output
(10-100% load)(max)
Temperature Coefficient
(Ambient temperature -10C to +50C) (max)
Warm Up Drift (max)
(*5)
Max Power Total Regulation (max) (*2)
Maximum Ripple Voltage (max) (*6)
Maximum Ripple & Noise (max) (*6)
Start Up Time (100VAC)(max)
Hold-up Time (100/240VAC)(typ)
Voltage Adjustable Range
(*7)
Over Current Protection (min) (*8)
Over Voltage Protection (min) (*9)
Over Temperature Protection
Remote Sensing
Function Remote ON/OFF Control
Parallel Operation
Series Operation
Operation Indicator
Monitoring Signal
Operating Temperature
Storage Temperature
Operating Humidity
Environment Storage Humidity
Vibration
Shock
Withstand Voltage
Isolation
Isolation Resistance

Safety Standards
Standards
EMI
Immunity
Weight max
Mechanical
Size (WxHxD)

MTW30-51212
2

AC85-265

Hz

47-440

A
A
mA
VDC
A
A

0.55/0.45
76/77
0.8/0.4
20/40
0.55/0.75 (100VAC (Electrical Appliance and Material Safety Law) / 240VAC (UL, IEC))
+5 [V1]
12 [V2]
-12 [V3]
+5 [V1]
+15 [V2]
-15 [V3]
3
1.2
0.3
3
0.8
0.3
4.5
2
0.45
4.5
2
0.45

mVp-p
mVp-p
ms
ms
VDC
A
VDC

30
+5+0.3, -0.1

33

+12 0.6

-12 0.6

+5+0.3, -0.1

+15 0.75

-15 0.75

1.0%

0.4%

1.0%

0.4%

2.0%

1.0%

2.0%

1.0%

2.0

1.0

2.0

1.0

3.0
80
120

2.0
100
150

3.0
80
120

2.0
100
150

1.0

300
20/140
Fixed/Variable (CH1)
4.7
2.1
0.48
4.7
2.1
0.48
5.8
Not available
5.8
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available

-10 to +60

-30 to +75
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
5-10Hz, 10 minutes sweep, 10mmp-p total amplitude, 3 directions, 1h for each, in non-operation
10-200Hz, 10 minutes sweep, 19.6m/s (2G) acceleration, 3 directions, 1h for each, in non-operation
588m/s (60G), 11 5ms, 3 directions, 3 times for each, in non-operation
For 1 minute at ordinary temperature and humidity
Between input terminal and ground terminal: 2.0kVAC, 10mA cutout current
Between input terminal and output terminal: 3.0kVAC, 10mA cutout current
Between output terminal and ground (G): 500VAC, 20mA cutout current
In 500VDC and 100M or over at ordinary temperature and humidity
Between input terminal and ground terminal, between input terminal and output terminal,
and between output terminal and ground terminal
Approved by UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (TV),
complying with Electrical Appliance and Material Safety Law
(meeting the regulations of creepage surface and spacial distance in item 8 of the appendix table)
Complying with FCC-Class B / VCCI-Class B / EN55011-B / EN55022-B
Complying with EN61000-4-2 Level 4, -3 Level 3, -4 Level 3, -5 Level 4, -6 Level 3, -8 Level 4, -11
g
210
mm
26 x 65 x 140

With nominal input/output voltage, maximum output current, and Ta=25

C, if not specified separately.
(*1) In primary surge current, 25
C, and cold starting.
(*2) Overshoot in starting input is 4%typ. Floating system is used for V1-V2 and V1-V3.
(*3) The maximum output current value is between -10C and +50C. For use in outside this temperature range, Derating is needed.
(*4) Flowing time should be within 10 seconds and the effective current/power should be the same as or less than the maximum
current/power.
(*5) 30min to 8h after the start of input voltage application.
(*6) In 100MHz, -10C-0C. Ripple: V1-140mVp-p max, V2, V3-160mVp-p max. Ripple noise: V1-160mVp-p, V2/V3-180mVp-p max.
(*7) For output voltage adjustable types (variation V), output voltage can be varied in the range of +5V through +5.2V for CH1 (+5V)
only, by the output voltage trimmer.
(*8) When the other channels are in 0A. Fold-back type drooping system and automatically resumes when the causes are removed.
(*9) For V1 only: Zener clamp system

All specifications are subject to change without notice.

MTW30-51515
2

Recommended EMC Filter

RSEL-2001E
Please refer to "TDK-Lambda
EMC Filters" catalog.

MTW 30W
Outline Drawing
UP

Name plate
140
1320.5

140

1320.5

570.5

7MAX.
INPUT
CONNECTOR

7MAX.
38.5

CN2
6
Area for mounting
components

7max.

Name plate

6max.

Specications of terminals

6max.

Ground pattern/Spacer area

Solder side (1 location point)
Area for mounting screw
Side with components (1 location point)
Spacer area
Solder side (3 location points)
Area for mounting screw
Side with components (3 location points)

Unit: mm
Allowable dierence is 1mm if not specied separately.

CN2 4 3
5
6

5
3

UP

3max.

OUTPUT
CONNECTOR

(4)

1 Output voltage trimmer (option)

7max.

23
(1.6)

(45.9)

6.7

7MAX.

(14.1)

65

CN1

14.1

65

570.5

CN2

(4.5)

1
Output connector
(4)
4-3.5

3MAX.

1.6

4.5

CN1

23

7MAX.

Input connector

(4)

4
7MAX.

7MAX.

7MAX.

7MAX.

45.9

MTW30W

4-3.5
Mounting hole

CN1

CN1Input side
P5

CN2Output side
P1 V3 Output 3

Ground

P3 N Neutral
P1

P2
P3

Live

G2 Ground 2

P4 V2 Output 2

- VH series B3P5-VH-B
by J.S.T. Mfg. Co., Ltd.

P5 G1 Ground 1
P6 V1 Output 1

- VH series B6P-VH-B
by J.S.T. Mfg. Co., Ltd.

Maximum output power (%)

Output Power - Ambient Temperature (Derating Curve)

Shows derating for products without

covers.
For (A)-(F), refer to the item regarding

Ambient temperature (
C)
In the range indicated by
, operation is
possible but the characteristics are not guaranteed.
All specifications are subject to change without notice.

MTW 60W

MTW60W
ITEMS/UNITS

MTW60W Specifications
MODEL
CH

Voltage Range (Nominal: 100-240VAC)

Frequency
(Nominal: 50-60 single phase)
Power Factor (100/240VAC)(typ)
Input
Efficiency (100/240VAC)(typ)
Current (100/240VAC)(typ)
Inrush Current (100/240VAC)(typ) (*1)
Leakage Current (max)
Nominal Voltage
(*2)
Maximum Current
(*3)
Maximum Peak Current
(*4)
Maximum Power
(P0[V1]+P0[V2]+P0[V3])
Voltage Setting Accuracy
(100/240VAC,100% load)
Maximum Line Regulation
(Within input voltage range)(max)
Maximum Load Regulation
Output
(10-100% load)(max)
Temperature Coefficient
(Ambient temperature -10 C to +50 C)(max)
Warm Up Drift (max)
(*5)
Max Power Total Regulation (max) (*2)
Maximum Ripple Voltage (max) (*6)
Maximum Ripple & Noise (max) (*6)
Start Up Time (100VAC)(max)
Hold-up Time (100/240VAC)(typ)
Voltage Adjustable Range
(*7)
Over Current Protection (min) (*8)
Over Voltage Protection (min) (*9)
Over Temperature Protection
Remote Sensing
Function Remote ON/OFF Control
Parallel Operation
Series Operation
Operation Indicator
Monitoring Signal
Operating Temperature
Storage Temperature
Operating Humidity
Environment Storage Humidity
Vibration
Shock
Withstand Voltage
Isolation
Isolation Resistance

Safety Standards
Standards
EMI
Immunity
Weight max
Mechanical
Size (W x H x D)

MTW60-51212
1

MTW60-51515
3

AC85-265

Hz

47-440

A
A
mA
VDC
A
A

0.55/0.45
76
1.4/0.8
20/40
0.6/0.75 (100VAC (Electrical Appliance and Material Safety Law) / 240VAC (UL, IEC))
+5 [V1]
12 [V2]
-12 [V3]
+5 [V1]
+15 [V2]
-15 [V3]
5
2.5
0.5
5
2
0.5
7
3.5
0.7
7
3.5
0.7

60
+12 0.6

+5+0.3, -0.1
1.0%

mVp-p
mVp-p
ms
ms
VDC
A
VDC

62.5
-12 0.6

+15 0.6

+5+0.3, -0.1

0.4%

1.0%

-15 0.75
0.4%

2.0%

1.0%

2.0%

1.0%

2.0

1.0

2.0

1.0

2.5

2.0

1.0
80
120

100
150

2.5
80
120

2.0
100
150

350

550
20/180
Fixed/Variable (CH1)
7.4
3.7
0.75
7.4
3.7
0.75
5.8
13.8
Not available
5.8
16.5
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available

-10 to +60

-30 to +75
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
RH 10-90 (the conditions of maximum 35
C in wet bulb temperature and non-condensation should be ensured.)
5-10Hz, 10 minutes sweep, 10mmp-p total amplitude, 3 directions, 1h for each, in non-operation
10-200Hz, 10 minutes sweep, 19.6m/s (2G) acceleration, 3 directions, 1h for each, in non-operation
588m/s (60G), 11 5ms, 3 directions, 3 times for each, in non-operation
For 1 minute at ordinary temperature and humidity
Between input terminal and ground terminal: 2.0kVAC, 10mA cutout current
Between input terminal and output terminal: 3.0kVAC, 10mA cutout current
Between output terminal and ground (G): 500VAC, 20mA cutout current
In 500VDC and 100M or over at ordinary temperature and humidity
Between input terminal and ground terminal, between input terminal and output terminal,
and between output terminal and ground terminal
Approved by UL60950-1, CSA C22.2 No.60950-1 (C-UL), EN60950-1 (TV),
complying with Electrical Appliance and Material Safety Law
(meeting the regulations of creepage surface and spacial distance in item 8 of the appendix table)
Complying with FCC-Class B / VCCI-Class B / EN55011-B / EN55022-B
Complying with EN61000-4-2 Level 4, -3 Level 3, -4 Level 3, -5 Level 4, -6 Level 3, -8 Level 4, -11
g
330
mm
26 x 83 x 185

With nominal input/output voltage, maximum output current, and Ta=25

C, if not specified separately.
(*1) In primary surge current, 25
C, and cold starting.
(*2) Overshoot in starting input is 4%typ. Floating system is used for V1-V2 and V1-V3.
(*3) The maximum output current value is between -10
C and +50
C. For use in outside this temperature range, Derating is needed.
(*4) Flowing time should be within 10 seconds and the effective current/power should be the same as or less than the maximum
current/power.
(*5) 30min to 8h after the start of input voltage application.
(*6) In 100MHz, -10
C-0
C. Ripple: V1-140mVp-p max, V2/V3-160mVp-p. Ripple noise : V1-160mVp-p max, V2/V3-180mVp-p max.
(*7) For output voltage adjustable types (variation V), output voltage can be varied in the range of 4.5V through 5.5V for CH1 (+5V)
only, by the output voltage trimmer.
(*8) When the other channels are in 0A. Fold-back type drooping system and automatically resumes when the causes are removed.
(*9) For V1 only: Zener clamp system

All specifications are subject to change without notice.

Recommended EMC Filter

RSEL-2003W
Please refer to "TDK-Lambda
EMC Filters" catalog.

MTW 60W
Outline Drawing
185
1770.5

4
1110.5

1110.5
INPUT CONNECTOR

7MAX.

(5)
B

7MAX.

B
5

7MAX.
Name8max.
plate

Name plate
UP

23
(1.6)

3max.

7MAX.
55.4

3
1

5) Output connector
(4

5-3.5
CN2

8MAX.

7max.

750.5

360.5

83

185
1770.5

CN1

(54.1)

5
3
1
5

23
3MAX.
1.6

OUTPUT
CONNECTOR

7MAX.
CN2
30.6
8

Area for mounting

components
(55.4)

(4)
83
54.1
750.5
360.5

CN1

Input connector

8MAX.

7MAX.

8max.

7MAX.

MTW60W 7MAX.

4 5-3.5
Mounting hole

Output voltage trimmer (option)

UP

Ground pattern/Spacer area

Solder side (1 location point)
Area for mounting screw
Side with components (1 location point)
6max.
Spacer area
B
Solder side (3 location points)
Area for mounting screw
Side with components (3 location points)

A
4

7max.
4

6max.

Specications of terminals

Unit: mm
Allowable dierence is 1mm if not specied separately.

5
3 CN1
1

1
2
4 3
CN2
5
6
7
8

CN1

CN2

P5

P1 V3

P3 N

P2

P1

P3

G2

P4 V2

- VH series B3P5-VH-B
by J.S.T. Mfg. Co., Ltd.

P5
P6
P7
P8

G1
V1

- VH series B8P-VH-B
by J.S.T. Mfg. Co., Ltd.

Maximum output power (%)

Output Power - Ambient Temperature (Derating Curve)

Shows derating for products without

covers.
For (A)-(F), refer to the item regarding

Ambient temperature (
C)
In the range indicated by
, operation is
possible but the characteristics are not guaranteed.

All specifications are subject to change without notice.

MTW SERIES
Block Diagram
MTW15W

Input lter
circui

AC input
N

Output current
smoothing circuit

Inrush current
prevention/input
lter circuit

Over voltage
protection circuit

MOSFET
switch

V
OUTPUT
GND
1

Output current
smoothing circuit

Over voltage
protection circuit

Control circuit

V
OUTPUT
GND
2

Over voltage
protection circuit

Output current
smoothing circuit

V
OUTPUT

Control circuit

MTW30W
Inrush current
prevention/
input lter
circuit

AC input
N

Output current
smoothing circuit

Input rectication
circuit
Current
detection

Control circuit

Over voltage
protection circuit

MOSFET
switch
Auxiliary
power
supply

V
OUTPUT
GND
G1

Output current
smoothing circuit

Over voltage
protection circuit

V
OUTPUT

Over voltage
protection circuit

V
OUTPUT

GND
G2
Output current
smoothing circuit

Control circuit

MTW60W

AC input
N

Inrush current
prevention/
input lter
circuit

Output current
smoothing circuit

Input rectication
circuit
Current detection

Control circuit

Over voltage
protection circuit

MOSFET
switch

V1:OUTPUT
GND
G1

Auxiliary
power supply
Control circuit

Output current
smoothing circuit
Current detection

Control circuit

MOSFET
switch
Auxiliary
power supply

V2:OUTPUT

Over voltage
protection circuit

V3:OUTPUT

GND
G2
Output current
smoothing circuit

Control circuit

All specifications are subject to change without notice.

Over voltage
protection circuit

MTW SERIES
MTW series Instruction Manual
1. Explanation of functions and notes
1 EMI and ESD measurement method

5 CE marking
MTW series meets the EN60950-1 standards and the CE
marking is applicable to this series, based on 73/23/EEC
and 93/68/EEC. The custom-made power supply units

8mm

device are not basically CE-marking applicable, except

Filler piece6mm

Metal plate

when

max.

"CE-marking applicable" is specifically declared in their

specification documents.

2 Ripple and ripple noise measurement

C1: 100 electrolytic capacitor
C2: 0.1F film capacitor

Power supply for test

(variation models) modified from this DC power supply

6 Operation of Over Current Protection

150mm

Note that if nonlinear loading such as by lamp or motor,

Output connector

C2

C1

and constant current load is connected, output voltage

Load

may not be generated when starting up. Also, there is a

restriction in the connectable load capacity. Check it in
the specification document.

Mesurement point

7 Over Voltage Protection

3 Maximum peak current

A protection circuit which clamps the output voltage with

Peak current flow can be allowed. However, observe

the zener diode is incorporated, in order to prevent the over

the conditions shown below for a peak current over the

voltage output when in an unusual current condition.

nominal value.

When this circuit is activated, restart is impossible.

I1

8 Other points to be noted

This product has surface-mount components on the bottom
I2

panel (solder side). Vibration, impact, and distortion, etc. in

the board can cause failure due to chip crack. Be careful
in handling.

D = t T

(1) Condition of time

t 10 seconds

(2) Condition of peak current I1 Maximum peak current

(3) Condition of effective current DI + (1-D) x I Maximum current

(4) Condition of effective power P Maximum power

4 Minimum output current

15W/60W type
There is no restriction in minimum output current value.
30W type
The CH1 (+5V) output current should be 0.5A or over
when in use.
If it is 0.5A or lower, the regulations for the other
channels cannot be satisfied.

All specifications are subject to change without notice.

10

MTW SERIES
2.Mounting
1 Mounting direction
(A) Standard mounting

Input connector

Output connector

Output connector

Input connector

Input connector

Input connector

Input connector

Input connector

The standard mounting method of the power supply unit to a device

is (A). The methods (C) through (F) are also available.
The method (B) should not be used. This can cause overheating.
When using for mounting methods (A) and (C) through (F), operate
the unit within the derating curve shown in Fig-1.

2 Mounting method
Use spacers (filler pieces: 6mm max) in the mounting

4mm min.10mm

holes on the board. Keep a space of 8mm or over. Also

keep a spacial distance (4mm or over) in order to satisfy
the insulation regulations/withstand voltage. If a spacial

8mm min.

distance (4mm or over) cannot be kept, insert an insulating

plate, etc. It is also recommended to keep a distance of
10mm or over from adjacent devices, in order to generate

Filler piece6mm

Metal plate

max.

thermal convection.
4mm min.10mm 4mm min.10mm

Frame

MTW15W
4mm min.10mm

4mm min.10mm

3. Precautions in use
When this product is in use, confirm that the power

quality of the electrolytic capacitor.

supply's ambient temperature is within the range of

When the power supply units are in a series operation,

operating temperatures. The power supply's ambient

the nominal current is restricted according to the lowest

temperature means the temperature around the power

supply unit, causing a temperature rise inside the device.

nominal current value of the units in use. In addition, in

order to prevent damage to internal elements and other

For use with natural air cooling, locate the unit so as to

parts due to reverse voltage applied to the unit, connect

generate thermal convection. Also keep a distance of 10mm

a diode (reverse withstand voltage: twice or over the

or over from adjacent devices, from each side of the unit.

value of total output voltage, forward current: twice or

Select input/output wire materials and noise filters, etc.

over the value of output current, forward voltage drop:

which have enough allowance in their respective current

possibly minimum) to prevent reverse voltage, to the

capacity.

output terminal of the unit.

If the power supply unit is not in use for a long period

of time, it is recommended to apply input voltage for
approximately 1 hour, every 2 years, to maintain the

No materials used in this product contain the bromine

fire retardant (PBDPEs, PBBs).
No ODS are used in the production of this product.

4. Troubleshooting
Is the specified input voltage being applied to the input
terminal?

All specifications are subject to change without notice.

Are the connections of input/output terminals correct?

Check that the connecting wires are not too thin.