Scribd
Upload
444 views1 page

Heat Transfer Problems & Solutions

This document contains multiple heat transfer problems involving determining temperatures, heat flux, or heat transfer rates given properties like material, geometry, temperatures, and heat transfer coefficients. Specifically, it provides problems involving determining the thermal conductivity of a plate, temperature of an aluminum plate dissipating heat from transistors, temperature of the outer surface of an aluminum pan transferring heat to boiling water, thermal conductivity of a refrigerator door, heat transfer rate from hot air to a plate, heat loss rate from a person through radiation, net heat transfer rate to the base of a cubical furnace, and fraction of heat lost from a glass solar collector cover by radiation.

Uploaded by

Izwan Saifudin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
444 views1 page

Heat Transfer Problems & Solutions

This document contains multiple heat transfer problems involving determining temperatures, heat flux, or heat transfer rates given properties like material, geometry, temperatures, and heat transfer coefficients. Specifically, it provides problems involving determining the thermal conductivity of a plate, temperature of an aluminum plate dissipating heat from transistors, temperature of the outer surface of an aluminum pan transferring heat to boiling water, thermal conductivity of a refrigerator door, heat transfer rate from hot air to a plate, heat loss rate from a person through radiation, net heat transfer rate to the base of a cubical furnace, and fraction of heat lost from a glass solar collector cover by radiation.

Uploaded by

Izwan Saifudin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Fakulti Kejuruteraan Mekanikal & Pembuatan

Universiti Tun Hussein Onn Malaysia

BDE 30603: Heat Transfer Individual Assignment 1


1-50 Two surfaces of a 2 cm thick are maintained at 0 C and 80 C, respectively. If it is determine that
heat is transferred through the plate area of 500W/m2 , determine its thermal conductivity.
1-51 Four power transistors, each dissipating 12 W, are mounted on a thin vertical aluminum plate 22
cm x 22 cm in size. The heat generated by the transistors is to be dissipated by both surface of the plate
to the surrounding air at 25 C, which is blown over the plate by a fan. The entire plate can be assumed
to be nearly isothermal , and exposed surface area of the transistor can be taken to be equal to its base
area. If the average convection heat transfer coefficient is 25 W/m2.K, determine the temperature of
the aluminum plate. Disregard any radiation effects.
1-57 An aluminum pan whose thermal conductivity is 237 W/m.K has a flat bottom with diameter 15
cm and thickness 0.4 cm. Heat is transferred steadily to boiling water in the pan through its bottom at a
rate of 1400 W. if the inner surface of the bottom of the pan is at 105 C, determine the temperature of
the outer surface of the bottom of the pan.
1-62 A heat flux meter attached to the inner surface of a 3 cm thick refrigerator door indicates a heat
flux of 32 W/m2 through the door. Also, the inner and outer surfaces temperature of the door are
measured to be 7 C and 15 C, respectively. Determine the average thermal conductivity of the
refrigerator door.
1-66 Hot air at 80 C is blown over a 2 m x 4 m flat surface at 30 C. if the average convection heat
transfer coefficient is 55 W/m2.K, determine the rate of heat transfer from the air to the plate, in kW.
1-80 Consider a person whose exposed surface area is 7.2 m2, emissivity is 0.5, and surface
temperature is 32 C. determine the rate of heat loss from that person by radiation in a large room
having walls at a temperature of a) 300 K and b) 280 K.
1-119 Consider a 3 m x 3 m x 3 m cubical furnace whose top and sides surfaces closely approximate
black surface at a temperature of 1200 K. The base surface has an emissivity of 0.4 and is maintained at
800 K. Determine the net rate of radiation heat transfer to the base surface from the top and side
surfaces.
1-121 Consider a flat-plate solar collector placed on the roof of a house. The temperatures at the inner
surfaces of the glass cover are measured to be 33 C and 31 C, respectively. The glass cover has a
surface area of 2.5 m2, a thickness of 0.6 cm, and a thermal conductivity of 0.7 W/m.K. Heat is lost from
the outer surface of the cover by convection and radiation with a convective heat transfer coefficient of
10 W/m2.K and the ambient temperature of 15 C. Determine the fraction of heat lost from the glass
cover by radiation.

You might also like