CWDM
Products
Coarse Wavelength Division Multiplexing (CWDM)
CWDM & Conversion for Optical Networks
from the network connectivity experts
Transition Networks new CWDM products help
you to alleviate fiber exhaustion and increase
bandwidth on your existing fiber infrastructure.
Coupled with Transition's industry leading media
conversion, CWDM can be utilized to transmit
multiple protocols over an existing fiber link. All
CWDM products from Transition Networks come
with a lifetime warranty.
alleviate fiber exhaustion
and increase bandwidth
transition networks
CWDM
CWDM with media conversion as a transponder
Coarse wavelength division multiplexing (CWDM) is a technology which multiplexes multiple optical carrier signals onto a single optical fiber by using different wavelengths (colors) of light to carry each individual signal.
Benefits of using CWDM include increased capacity on routes with fiber exhaustion and a more affordable alternative to installing more fiber or leasing additional fibers.
Utilizing passive optical CWDM technology along with CWDM wavelength-specific optical ports on Transitions
complete line of media converters and switching products allows customers the full benefit of CWDM technology, scaled to their exact needs, by using a simple, modular, building-block approach to its deployment.
CWDM can be used in conjunction with a fiber switch and media conversion to combine multiple fiber lines from
the switch over one fiber. The example below is showing how an optical line media converter can act as a
transponder by changing the wavelength of the optics of the fiber line from the switch to match the CWDM
device. From the CWDM, all fibers are combined for transmission over one fiber.
Utilize Optical Line Converter as
a transponder to clean up or
change wavelength of optics to
match CWDM device
Mux/Demux
<2>
800-526-9267 [Link]
Allows for transport of multiple
protocols over a duplex pair of
backbone fibers when combined
with media conversion
transition networks
CWDM
CWDM as an add/drop multiplexer (OADM)
The optical add/drop multiplexer modules provide the ability to add or drop a single wavelength or multi-wavelengths from a fully multiplexed optical signal. This allows intermediate locations between remote sites to
access the common, point-to-point fiber segment linking them. Wavelengths not dropped, pass-through the
OADM and continue on in the direction of the remote site. Additional selected wavelengths can be added or
dropped by successive OADMs as needed.
Active CWDM Media Converters
Active CWDM media converters are those that either convert a copper-based signal to a CWDM wavelength specific optical signal or convert a multimode optical signal to a CWDM wavelength specific single mode optical
signal. Transition Networks CWDM media converters are available for the managed, Point System chassisbased platform or stand-alone models covering various protocols including: Fast Ethernet, Gigabit Ethernet,
T1/E1, T3/E3/DS3, RS232, RS422, RS485, SONET and ATM.
TM
Add/drop a single wavelength or
multi-wavelengths from a fully
multiplexed optical signal
Add/Drop Mux
<3>
800-526-9267 [Link]
Easy deployment and flexible
implementation with Plug and
Play - no configuration of
CWDM components
transition networks
CWDM
CWDM as a mux/demux with media conversion
The Mux/Demux devices are available in 4, 5, 8 and 9-channel configurations with the capability of expanding
up to 16 channels. These modules passively multiplex the optical signal outputs from 4 or more electronic
devices, send them over a single optical fiber and then de-multiplex the signals into separate, distinct signals
for input into electronic devices at the other end of the fiber optic link.
Modules can also be configured with a single wideband 1310nm port to accommodate existing, non-CWDM single mode ports on switches and media converters. In addition, certain models are available with an expansion
port, providing a means to add additional wavelengths or channels to an existing mux/demux by daisy-chaining the modules together. This unique feature allows the CWDM to be cost-effectively tailored to current needs,
while providing a flexible, scalable path to increase the number of channels in the future as your network grows.
Alleviate fiber congestion by
reducing backbone fiber used by
a factor of 4, 8 or 16
Provide scalable Ethernet bandwidth between 100Mb and 8
Gbps over existing fiber links
Mux/Demux
800-526-9267 [Link]
<4>
transition networks
CWDM
ordering information
Transitions CWDM devices are available in two main configurations: Optical Add/Drop Multiplexer (OADM)
modules and Multiplexer/Demultiplexer (Mux/Demux) modules. Each module is a pluggable device that slides
into a one rack unit (1RU) chassis that can hold 2 modules and mount into a 19 equipment rack.
Channel Configuration
(Module Type A Only)
1A451
1 Ch. Add/Drop 1510nm (group 451)
1B451
1 Ch. Add/Drop 1530nm (group 451)
1C451
1 Ch. Add/Drop 1550nm (group 451)
1D451
1 Ch. Add/Drop 1570nm (group 451)
1A453
1 Ch. Add/Drop 1530nm (group 453)
1B453
1 Ch. Add/Drop 1550nm (group 453)
1C453
1 Ch. Add/Drop 1570nm (group 453)
1D453
1 Ch. Add/Drop 1590nm (group 453)
1A455
1 Ch. Add/Drop 1550nm (group 455)
1B455
1 Ch. Add/Drop 1570nm (group 455)
1C455
1 Ch. Add/Drop 1590nm (group 455)
1D455
1 Ch. Add/Drop 1610nm (group 455)
1A847
1 Ch. Add/Drop 1470nm (group 847)
1B847
1 Ch. Add/Drop 1490nm (group 847)
1C847
1 Ch. Add/Drop 1510nm (group 847)
Examples
1D847
1 Ch. Add/Drop 1530nm (group 847)
1E847
1 Ch. Add/Drop 1550nm (group 847)
CWDM-M455LCR
CWDM Mux/Demux Module,
4 channel, 1550 nm ~ 1610nm
1F847
1 Ch. Add/Drop 1570nm (group 847)
1G847
1 Ch. Add/Drop 1590nm (group 847)
1H847
1 Ch. Add/Drop 1610nm (group 847)
CWDM-_ _____ __R
Connectors
Module Type
A
M
Add/Drop Mux
LC
LC/PC
Mux/Demux
SC
SC/PC
Channel Configuration
(Module Type M Only)
CWDM-A1D847SCR
CWDM Add/Drop Mux Module,
1 channel drop (1530nm)
pass 1470nm ~ 1510nm &
pass 1500nm ~ 1610nm
TN-SFP-OC3S8-Cxx
SFP 100BASE-FX/OC-3 (LC) SM
[80 km/49.7 mi.] Link Budget: 29.0 dB
TN-SFP-OC12S-Cxx
OC-12/STM-4 (LC) SM
[80 km/49.7 mi.] Link Budget: 29.0 dB
TN-SFP-LX8-Cxx
1000BASE-LX/Fibre Channel 1x
(LC) SM
[80 km/49.7 mi.] Link Budget: 24.0 dB
xx = center wavelength (c)
27 = 1270nm
29 = 1290nm
31 = 1310nm
33 = 1330nm
35 = 1350nm
37 = 1370nm
39 = 1390nm
41 = 1410nm
43 = 1430nm
4 Ch. 1510/1530/1550/1570nm
453
4 Ch. 1530/1550/1570/1590nm
455
4 Ch. 1550/1570/1590/1610nm
551
5 Ch. 1510/1530/1550/1570nm + 1310nm
553
5 Ch. 1530/1550/1570/1590nm + 1310nm
555
5 Ch. 1550/1570/1590/1610nm + 1310nm
847
8 Ch. 1470 ~ 1610nm
947
9 Ch. 1470 ~ 1610nm + 1310nm
*Note: 1310nm channel is wideband (+/- 50nm)
Other channel configurations may be available upon request.
Please contact Transition Networks.
Rack Mount Bracket
SFPs - CWDM Wavelengths
Ordering Info
451
CWDM-MB19R1
19 Rack Mount Bracket, 1RU High,
holds 2 CWDM Modules
45 = 1450nm
47 = 1470nm
49 = 1490nm
51 = 1510nm
53 = 1530nm
55 = 1550nm
57 = 1570nm
59 = 1590nm
61 = 1610nm
TN-SFP-OC48S-Cxx
OC-48/STM-16/Fibre Channel
2x/1x/1000BASE-LX (LC) SM
[40 km/24.9 mi.] Link Budget: 18.0 dB
800-526-9267 [Link]
<5>
transition networks
CWDM
featured products and contact information
Featured Products
CWDM-M847LCR
8 Channel Mux/Demux CWDM
Contact Us
Worldwide Headquarters & U.S. Sales
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600
toll free: 800.526.9267
fax: 952.941.2322
CWDM-A1F847LCR
1 Channel Add/Drop Mux CWDM
sales@[Link]
info@[Link]
techsupport@[Link]
[Link]
Sales Offices
CFMFF4040-100
Line Converter Card
North America
Canada - Eastern (ON,
PQ, NB, NS, PEI, NF/LB)
tel +1-603-750-7169
fax +1-815-360-7401
Europe
EMEA Headquarters /
Germany
tel +49 611 974 8460
fax +49 611 950 4672
MIL-S24T2GPA
MILAN 24-port 10/100/1000
Unmanaged Copper Switch
Canada - Western (YT,
NT, NU, BC, AB, SK, MB)
tel +1-425-487-6788
fax +1-360-234-9170
Eastern Europe
tel +420 2 2426 6901
fax +420 2 2426 6854
MIL-SM8002TG
MILAN 9-port 10/100/1000
Managed Copper Switch
CWDM-MB19R1
19 Rack Mount Bracket, 1RU High,
holds 2 CWDM Modules
CPSMC0800-100
8-slot Point System Chassis
Latin America
Mexico, Central America,
Caribbean
tel: +1-952-996-1517
fax: +1-952-941-2322
Sweden
tel/fax +46 8 243 454
United Kingdom
tel +44 1691-830016
fax +44 1691-830876
South America
Office: +1-727-812-9656
Mobile:+1-954-376-1037
Fax: +1-952-941-2322
Asia
China / Hong Kong
tel +1-952-941-7600
fax +1-952-941-2322
Brazil
tel: +55 11 8244-7630
India
tel +65 6288-9810
fax +65 6234-0564
Japan
tel +81 03 3357 9980
fax +81 03 5360 4480
TM
Southeast Asia
tel +65 6288-9810
fax +65 6234-0564
900124
<6>
800-526-9267 [Link]
2009 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.
