Integrated solutions for Bitzer
screw compressors
T e c h n o l o g y & E v o l u t i o n
Integrated solutions for Bitzer
screw compressors
The best way to protect Bitzer screw
compressors
Sample of envelope protection
Based on the value of suction and
discharge pressures, the compressor is
unloaded for safety, according to the
specific refrigerant.
For more information please refer to Bitzer
documentation.
As a result of our partnership with Bitzer, CAREL
presents the new driver for screw compressors 100% max. capacity 50% max. capacity
1 min limit time 10 min time limit
designed for the pCO platform.
5 min at 50% capacity 75% max. capacity
during start-up no time limit
An EasyTools macroblock has been developed to
75% max. capacity
customised software applications for OEMs who want correct operation
1 min time limit
to differentiate their offering, or alternatively to be directly immediate stop
embedded into standard chiller application software.
condensing press.
Both solutions, the Macroblock or the complete software
application, can be downloaded from the CAREL site.
The revolutionary driver manages the operating limits of
the compressor for each type of refrigerant, according to
Bitzer specifications, allowing operation with maximum
performance without compromising the compressor.
evaporating press.
Suitable for EasyTools application
Software Driver
for EasyTools
Suitable for your custom software application
or embedded into CAREL standard screw chiller
software.
Specific features
• part-winding start;
• 4 capacity control steps, 25, 50, 75 and 100%
and step-less capacity control;
• start unloading (starts at 25%);
• economizer / liquid injection solenoid valve
control;
• application limit protection with R134a,
R407C and R22;
• start up with high evaporating temperature;
• oil level alarm;
• timing protection (even after a blackout).
Hardware Driver based on pCO1 small
for third party PLC
In addition to the software driver, CAREL provides a
Suitable for third party PLC
pCO platform controller equipped with Bitzer driver,
capable of managing the contactors, the thermal and
mechanical protectors, the cooling capacity and actively
protect the compressor against suction and discharge
pressure values that may affect its working life. controlled by 4 to 20 mA
Specific features
• embedded Software Driver for:
- capacity control;
- part-winding;
- maximum safety;
• plus protection provided by:
- low pressure switch;
- high pressure switch;
- high pressure transducer;
- low pressure transducer;
- high discharge temperature;
Integrates protection driver for Bitzer screw
• 4 to 20 mA signal for capacity control. compressor
+302239371 - 1.0 - 01.03.06
Headquarters
CAREL S.p.A.
Via dell’Industria, 11 - 35020 Brugine - Padova (Italy)
Tel. (+39) 0499 716611 - Fax (+39) 0499 716600
[email protected] - www.carel.com
Subsidiaries Affiliated Companies:
CAREL Australia Pty Ltd CAREL Korea Co. Ltd.
www.carel.com.au www.carel.co.kr
[email protected] [email protected]CAREL China Ltd. CAREL (Thailand) Co. Ltd.
www.carelhk.com www.carel.co.th
[email protected] [email protected]CAREL Deutschland GmbH
www.carel.de
[email protected]CAREL Export
www.carel.com
[email protected]
CAREL France Sas
www.carelfrance.fr
[email protected]CAREL Italia
www.carel.it
[email protected]
CAREL Sud America Ltda.
www.carel.com.br
[email protected]CAREL U.K. Ltd.
www.careluk.co.uk
[email protected]CAREL USA L.L.C.
www.carelusa.com
[email protected] © CAREL S.p.A. 2006 all rights reserved
CAREL reserves the right to modify the features
of its products without prior notice.
www.carel.com
