Scribd
Upload
232 views1 page

Optical Meter Relays Overview

This document provides specifications for K Series optical meter relays/self-contained controllers made by D'Arsonval. The K Series includes models 303-K, 503-K, and 603-K. It operates on an optical principle where a light source and photocell are positioned by the setpoint mechanism to actuate a relay based on the meter pointer position. It is immune to electrical noise and best for noisy environments. Specifications include accuracy of ±2%, tracking, balance, repeatability, overload capacity, response time, and dimensions for each model.

Uploaded by

sas999333
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
232 views1 page

Optical Meter Relays Overview

This document provides specifications for K Series optical meter relays/self-contained controllers made by D'Arsonval. The K Series includes models 303-K, 503-K, and 603-K. It operates on an optical principle where a light source and photocell are positioned by the setpoint mechanism to actuate a relay based on the meter pointer position. It is immune to electrical noise and best for noisy environments. Specifications include accuracy of ±2%, tracking, balance, repeatability, overload capacity, response time, and dimensions for each model.

Uploaded by

sas999333
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Optical Meter Relays/

Self-Contained - K Series.
K Series (Compack I & II)
Models: 303-K (3 / "), 503-K (4 / "),
603-K (5 / ")
1

UL Recognized with suffix "KU"


Temperature & non-temperature models
Continuous indication
Infinite noise rejection
Easy installation - all connections
at rear terminals
Solid-state circuitry
Single and double setpoints
Rectangular & stackable edgewise models
Customized Scales available

Optical Compack Controllers operate on an optical principle associated with the meter mechanism. A light source (incandescent
lamp) and a photo-resistive cell combination are positioned by the
setpoint mechanism. An opaque vane is attached to the meter
mechanism so that when the indicating pointer reaches the setpoint
the vane intercepts the light from the source, causing a sharp
change in resistance of the photocell. The resistance change is
used to actuate a relay driver circuit for control of an external load.
The response characteristics of D'Arsonval mechanisms automatically provide filtering of the input signal, making Compack Controllers immune to line noise and transient surges. Optical type
controllers are the best choice for applications in electrically noisy
environments.

DC Ranges

K Series Specifications
DC Ranges

Specifications

AC Ranges (Rectifier Type)

Pyrometer

Current

Voltage

Current

Voltage

Accuracy

2%

2%

3%

3%

2%

Tracking

Optional

Optional

Optional

Optional

N/A

Balance

1%

1%

1%

1%

1%

Repeatability

Taut band
Pivot-and-Jewel

Resistance Tolerance
Overload
Capacity

1 Second

< 1/4%
2%

< 1/4%
2%

< 1/4%
2%

20%

5%

1000%

100V 1000%
> 100V 200%

DC Milliamperes

150%

N/A

DC Milliamperes

150%

150%

N/A

60 Hz

60 Hz

N/A

Overshoot (maximum)

20%

20%

20%

20%

N/A

1.5 sec

1.5 sec

1.5 sec

1.5 sec

N/A

3 sec

3 sec

3 sec

3 sec

N/A

Supply Power:
120VAC 50/60Hz standard; 220VAC, 240VAC, 12VDC, 24VDC and 28VDC optional
Load Relay Rating: SPDT 215VA @ 120VAC DPDT Output Relays optional
Made in
the USA

Effects of shock, vibration, humidity and temperature are equal to or better than ANSI C39.1-1981.
Safety (dielectric test, leakage and other hazards): instruments are equal to or better than ANSI C39.5-1974.
The above tolerance limits apply to the standard ranges listed in this bulletin. Special instruments may vary from these limits.
Rated circuit to ground voltage = 250 Vrms (350 Peak) except 50VDC on Pyrometer models.

K Series Dimensions
Model

Height

Width

Depth*

3.13

3.28

5.50

503-K (4 1/2")

4.27

4.71

5.50

603-K (5 1/2")

4.36

5.75

5.50

1 to 500

150%

120%

303-K (3 1/2")

5 to 1000

DC Volts

Process Ranges

Response Time Sensitivity 50a


(maximum)
Sensitivity <50a

DC Millivolts

N/A

150%

Dimensions are in inches.


* Depth = front of panel to end of terminals.
See price sheet for part numbers.
Contact Factory for more information & dimensional drawings.

1 to 1000

DC Amperes

< 1/4%
N/A

5 to 1000

use 50mV
external shunt

< 1/4%
2%
< 10V 20%
10V 5%

Calibration Frequency

Continuous

DC Microamperes

DC Volts

1-5
4-20
10-50
1-5
0-10

AC Ranges (Rectifier Type)


AC Microamperes

100 to 1000

AC Milliamperes

1 to 1000

AC Amperes

1 to 50

AC Millivolts

250 & 500

AC Volts

1 to 500

Thermocouple Pyrometer,
RTD Pyrometer, Tachometer
& Frequency Input
Consult Factory

You might also like