Committing to the future
testo Saveris
System
Configuration
Guide...2012
Use this handy guide to map out
your Saveris System and
devise a configuration that suits
your exact application
testo Saveris System Sketch and Starter Kit
You can choose individual Saveris system components to suit your needs or order a pre-configured testo Saveris
Set 1 listed at right. You can add additional components to any configuration as needed.
Title/Project
Date ____/____/____
Set 1: 2.4 GHz, consisting of base 0572 0260, 3 T1
NTC wireless probes without display 0572 1250,
power supply for base 0554 1096 and SBE software
0572 0180 incl. USB cable
Set.1....2.4GHz
Qty.
Part No. 0572 0250
Base: 150 probes max. any combination,
450 ch. max., 40,000 values/ch.,
15 wireless probes ma.x direct to Base
Wireless Routers: 30 max. per Base, 5 max
wireless probes per Router
Wireless Converter: 10 max. per Base, 15 max.
wireless probes per Converter
Ethernet Probes:150 max. via Ethernet to Base
Application Notes:
Wirreless or Ethernet Signal Notes:
Use this graph to sketch out your Saveris system.
Please note location of Base Unit, all wireless and/or
Ethernet probes, Routers, Converters, and any
additional accessories required. All wireless systems,
regardless of frequency or protocol, are affected by
(1) distance, and (2) mass. It is easier to communicate wirelessly within an offrice environment than it
is within a fully-stocked warehouse several racks
high. Note: liquids and metals also dampen wireless
signals. Please note in your drawing the following:
* Walls, doors, dividers, etc.
* Racks, shelving, cabinets
* Stored and finished goods
* Machinery, equipment
Add Routers for distances greater than 300 ft between
Saveris Base and wireless probes. For high
density installations, or distances greater than
300 ft, contact Testo for additional components
Please note especially
distances between Saveris (tm)
components that must be covered
required.
Wherever possible, please note
measurements, distances, and
materials of construction (ie. conctete, brick/cinder
block, metal siding, etc.).
testo SaverisTM Components:
Base, Router, Converters
Wireless
0572 3250
Wireless
Ethernet
Radio
Ethernet
0572 3190
Wireless
Saveris base, wireless frequency 2.4
GHz
Part no.
0572 0260
Qty.
2.4 GHz
2.4 GHz
2.4 GHz
testo Saveris Base
Saveris base, wireless frequency 2.4
GHz, GSM module integrated (for SMS
alarm)
Part no.
0572 0261
Saveris analog
converter
Saveris router
Saveris converter
Saveris router, 2.4 GHz,
wireless transmission
medium
Saveris converter, 2.4 GHz, Saveris Analog
converts the wireless trans- Converter
mission medium to Ethernet
Wireless
Qty.
0572 3250
Part no.
0572 0259
Part no.
0572 0258
Qty.
Ethernet
0572 3190
Qty.
Qty.
Qty.
One (1) AC Power supply is required for each Base, Router or Converter.
One (1) AC power supply is required for each Saveris Base. Order magnetic base antenna 0554 0525 separately for Saveris Base USB Adapter 0440 6723 and USB cable 0449 0047 is required to program
Saveris converter 0572 0258.
testo Saveris Components: Wireless probes
Probe versions with internal and external temperature and humidity sensors easily adapt to any application. Wireless probes are available with or
without an optional display. Current measurement data, battery status and signal strength are shown in the display. In the event of a transmission
interruption data is saved in the probes memory. See product literature or go to [Link]/saveris for component specifications.
Wireless
F/C
internal
external
external
Pt
100 %RH NTC
3.2
internal
3.2
TC
3.2
NTC
81 mm
NTC
external
internal
%RH NTC
%RH NTC
external
external
Saveris H3*/ H3D*
Saveris H2D *
Saveris H4D *
Wireless probe with internal NTC Wireless probe with external
probe connection and internal
NTC, door contact
2-channel wireless probe with 2 Wireless probe with 1 external
external TC probe connections Pt100 probe connection
(Choice of TC characteristics)
Humidity radio probe 3%
2%
Humidity radio probe 2%
Humidity radio probe
w/ external 2% probe
connection
Saveris T1
Part no.
0572 1250
Qty.
Saveris T3
Part no.
0572 9252
Qty.
Saveris H3
Part no.
0572 6250
Qty.
Saveris T3 D
Part no.
0572 9262
Qty.
Saveris H3 D
Part no.
Qty.
0572 6260
Saveris T1 / T1D
2.4 GHz
%RH, F/C
NTC
Saveris T1 D
Part no.
0572 1260
Saveris T2 / T2D
Qty.
Saveris T2
Part no.
0572 1251
Qty.
Saveris T2 D
Part no.
0572 1261
Saveris T3 / T3D
Saveris Pt / PtD
Qty.
Saveris Pt
Part no.
0572 7251
Qty.
Saveris Pt D
Part no.
0572 7261
Qty.
Saveris H2 D
Part no.
Qty.
0572 6262
Saveris H4 D
Part no.
Qty.
0572 6264
Each wireless Saveris probe includes AA alkaline manganese batteries (0515 0414)
testo Saveris Components: Ethernet probes
An existing LAN infrastructure can be used with the Ethernet probes for data transfer from the probe to the base, even over long distances.
All Ethernet probes include a display. See product literature or go to [Link]/saveris for component specifications.
Ethernet probes can operate in a POE configuration, otherwise a power supply 0554 1096 is required for each Ethernet probe.
%RH, F/C
F/C
NTC
%RH NTC
%RH NTC
%RH NTC
external
external
external
external
external
TC
external
Ethernet
Pt
100
0.5
Saveris Pt E
4-channel Ethernet probe with 4 1-channel Ethernet probe
w/ external NTC connection
external TC probe connections
Saveris T4 E
With display
Saveris Pt E
With display
Part no.
0572 7191
Saveris T1 E
Saveris T4 E
Ethernet probe with external
Pt100 probe connection
Qty.
Part no.
0572 9194
Part no.
0572 1911
Saveris H2 E *
Saveris H1 E *
Saveris H4 E *
Humidity Ethernet probe 2 %
Humidity Ethernet probe 1%
Ethernet probe w/ external
2% RH probe connection
Saveris H1 E
With display
Saveris H2 E
With display
Saveris T1 E
With display
Qty.
0.5
Qty.
One (1) AC power supply is required for each Ethernet probe
Part no.
0572 6192
Qty.
Part no.
0572 6191
Saveris H4 E
With display
Qty.
Part no.
0572 6194
*not for continuous high-humidity applications
Qty.
testo Saveris Components: software, accessories, external probes, calibration
Part no.
Software
SBE software, incl. USB connecting cable base-PC
Software version comparison
0572 0180
PROF software, incl. USB connecting cable base-PC
Saveris adjustment software incl. connection cable
for wireless and Ethernet probes
Saveris 21CFR11 software
0572 0181
Qty.
0572 0183
Qty.
Qty.
*
Calibration Certificates
Part no.
NIST calibration certificate/temperature; temp. data
3 standard points; one temp cert. per probe channel
400520 1901
Qty.
400520 2601
Qty.
Diagrams/tables/alarm overview/PDF reports
Calendar management
Representation of probe group
Transmission of alarms (e-mail, SMS, relay)
Comprehensive alarm management
Constant monitoring in PC continuous operation
Measurement data on background photo of locations
Integration into network (client-server)
Accessories
Part no.
Battery for wireless probe (4 AA alkaline batteries)
0515 0414
Battery for wireless probe for use below 14 F (qty 4
Energizer L91 Photo lithium)
0515 0572
100-240 V DC power supply; for Saveris base,
router, converter, Ethernet probe
0554 1096
Qty.
USB adapter for Saveris Converter 0572 0158
0440 6723
Qty.
Qty.
Qty.
Part no.
Accessories
USB to mini-USB cable
0449 0047
Qty.
Service Interface cable
0449 0069
Qty.
TC
PROF
Qty.
0572 0182
NIST cal. cert./humidity (RH);
humidity data logger; calibration points 11.3%RH and
75.3%RH at +25C; one RH cert. per probe channel
SBE
Simple installation and configuration
Water resistant *Class 1: K 1.5C (-40 to 1000C); Class 2: K 2.5C (-40 to 1200C)
Plug-in probes
Illustration
Stationary probe with stainless steel sleeve,
TC Type K
1.6 in.
Meas. range
Accuracy
Part no.
-58 to +400 F
Class 2*
0628 7533
Qty.
-76 to +752 F
Class 2*
0602 1793
Qty.
-58 to +338 F
Class 2*
0602 4792
Qty.
For H4D and H4E probes
0.24
Conn.: Fixed cable 6 ft.
Robust air probe, T/C Type K
4.5 in/
0.16 in.
Part no.
External Temp/RH probe, -20 to +70C, 0 to 100%
RH (non-condensing), +/- 0.3C, +/- 2% RH, 12mm
probe OD, 4 ft. cable
0572 6172
Conn.: Fixed cable 4 ft.
Magnetic probe, adhesive force approx. 20 N, with
magnets, for measurements on metal surfaces, TC
Type K
Fixed cable
1.4 in
0.8 in.
3 in.
Magnetic probe, adhesive force approx. 10 N, with
magnets, for higher temp., for measurements on
metal surfaces, TC Type K
Conn.: Fixed cable 5.2 ft.
Pipe wrap probe for pipe diameter 5 to 65 mm,
with exchangeable measuring head. Meas. range
short-term to +536F, TC Type K
Thermocouple with TC adapter, flexible, 59 in.
long, fibre glass, TC Type K
0602 4892
Qty.
-76 to +266 F
Class 2*
0602 4592
Qty.
-58 to +248 F
Class 1*
0628 0020
Qty.
20 mm
59 in.
For T2/T2D, H2D, H4D probes
-58 to +752 F
Class 2*
0602 0644
Qty.
-58 to +752 F
Class 2*
0602 0645
Qty.
-58 to +482 F
Class 2*
0602 0646
Qty.
-328 to +1832
F
Class 1*
0602 5792
Qty.
-328 to
+2372 F
Class 1*
0602 5693
Qty.
0.05 in.
Thermocouple with TC adapter, flexible, 59 in.
long, Teflon, TC Type K
59 in.
0.05
Immersion tip, flexible, TC Type K
39 in.
,12 in.
NTC
Class 2*
Conn.: Fixed cable 4 ft.
16 in.
Pipe wrap probe with Velcro strip, for temperature
measurement on pipes with diameter up to max.
4.9 in., Tmax +248F, TC Type K
Conn.: Fixed cable 5 ft.
32 in.
Thermocouple with TC adapter, flexible, 32 in.
long, fibre glass, TC Type K
0.05 in.
Immersion measurement tip, flexible, for
measurements in air/exhaust gases (not suitable
for measurements in smelters), TC Type K
-58 to +752 F
0.8 in.
External Temp/RH probe, 0 to +40C, 0 to 100% RH
(non-condensing), +/- 0.3C, +/- 2% RH, 4mm
probe OD, 7 ft. cable
0572 6174
For Pt/PtD and PtE probes
0.12 in.
Illustration
Stationary probe with aluminum sleeve, IP 65
1.6 in.
Meas. range
Probe accuracy
Part no.
-22 to +194 F
0.4 F (32 to +158 F)
0.9 F (remaining range)
0628 7503*
-31 to +176 F
0610 1725*
0.4 F (-13 to +167 F)
0.7 F (remaining range)
.24 in.
Qty.
Conn.: Fixed cable; Cable/length: 8 ft.
Accurate imm./pen. probe, 20 ft cable, IP 67
1.6 in.
.12 in.
Qty.
Conn.: Fixed cable; Cable/length: 20 ft.
Wall surface temperature probe, e.g. to prove
damage in building material
-58 to +176 F
0.4 F (32 to +158 F)
0628 7507
Qty.
Conn.: Fixed cable; Cable/length: 10 ft.
Stainless steel NTC food probe (IP65) with
PUR cable
5 in.
-58 to +302 F
.16 in.
Conn.: Fixed cable; Cable/length: 5 ft.
Waterproof NTC immersion/penetration
probe
4.5 in.
.20 in.
Conn.: Fixed cable
-58 to +302 F
1,2) 0.5%
of rdg (+212 to +302 F) 0613 2211*
0.4 F (-13 to +167 F)
0.7 F (remaining range)
0.5% of rdg (+212 to +302 F) 0613 1212
0.4 F (-13 to +167 F)
0.7 F (remaining range)
Qty.
Qty.
testo, Inc. 800-227-0729 e-mail: info@[Link] [Link] /saveris
Information subject to change without notice.
Part no.
External Type K TC temp probe, -200 to +260C, w/
6.5 ft teflon insulated flat cable, 90mm probe length,
4mm probe OD
0699 6539-3
Water resistant * Probes are suitable for transport and storage/warehousing applications
Plug-in probes
Part no.
External Pt100 temp probe, -50 to +200C, w/ 6.5 ft
(2m) teflon insulated flat cable, 90mm probe length,
4mm probe OD
0699 6539-2
For T3/T3D and T4E probes
39 in.
Part no.
External NTC temp probe, -50 to +150C, w/ 6.5 ft
(2m) teflon insulated flat cable, 90mm probe length,
4mm probe OD
0699 6539-1
