Scribd
Upload
40 views1 page

Embedment Depth Analysis for Zones A & B

The document describes two checks of zone areas and embedment depth for a foundation. Check 1 confirms zone A has a larger area than zone B. Check 2 verifies the length b is less than half the embedment depth. The document also notes the top of competent strata is at 24mPD and provides a diagram labeling zone A, zone B, the embedment depth, and DCM toe.

Uploaded by

Hamza Nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
40 views1 page

Embedment Depth Analysis for Zones A & B

The document describes two checks of zone areas and embedment depth for a foundation. Check 1 confirms zone A has a larger area than zone B. Check 2 verifies the length b is less than half the embedment depth. The document also notes the top of competent strata is at 24mPD and provides a diagram labeling zone A, zone B, the embedment depth, and DCM toe.

Uploaded by

Hamza Nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Check 1 : Area Zone A > Area Zone B (OK)

Check 2 : Length b = 3.2 < 0.5 X Embedment

Top of Competent Strata - 24mPD

Zone A

Embeddmen
t Depth 8.2m

Zone B

Zone A
Note: The interpretation assumes that a representative cone

DCM

DCM Toe

You might also like