FUL JADE L.
BAIDIANGO
Schedule of Minimum Test Requirements
Governing Items of Work of the DPWH
Standard Specifications for Highways,
Bridges, and Airports, 1988
Earthworks
Item 100 Clearing and Grubbing
Tests:
None
Item 101 Removal of Structures and
Obstruction
Tests:
None
Item 102 Excavation
Tests:
Same as for item 103, 104, and
105 or whichever is applicable
Item 103 Structure Excavation
If excavated materials are
wasted, the volume involved shall be
reported, so that quality control
requirements may be adjusted
accordingly. Submit Project Engineer
Certificate of waste.
If excavated materials are
incorporated into work:
For each 500 sm of each layer of
compacted fill or fraction thereof at
least one group of three in-situ density
tests. The layers shall be placed not
exceeding 200 mm in loose
measurement or based on the result of
compaction trials.
SUBBASE AND BASE COURSE
Item 104 Embankment
Tests:
Item 202 Crushed Aggregate Base Course
Tests: Same as for Item 201
1 G, Grading Tests
1 P, Plasticity Test (LL, PL, PI)
For every 1500 cm or fraction
thereof:
1 F, Fractured Face
Item 203 Lime Stabilized Road Mix Base
Course
Amount of Lime to be added:
1 CBR, California Bearing Ratio
Test
For every layer of 150 mm of
compacted depth/based on the
results of compaction trials:
At least one group of three
in-situ density tests for each
500 sm or fraction thereof.
Tests:
For every 1500 cm or fraction thereof:
1-G, Grading Test
1-P, Plasticity Test (LL, PL, PI)
1-C, Laboratory Compaction Test
At least one group of
three in-situ density tests
for each 500 sm or fraction
thereof.
Item 200 Aggregate Subbase course
For every 2500 cm or fraction
thereof:
Item 201 Aggregate Base Course
Tests:
For every 300cm or fraction thereof:
C. Compacted Base Course
For every layer to 150 mm compacted
depth:
1 D, Field Density Test for every
150mm or fraction thereof
1 T, Thickness Determination for
every 150 mm or fraction
thereof
For every layer of 150 mm of
compacted depth/based on the
results of compaction trials:
Tests: None
1-G, Grading Test
1-P, Plasticity Test (LL, PL, PI)
1-C, Laboratory Compaction Test
1 C, Laboratory Compaction
Test
1 U, Unconfined compression test
1 CBR, California Bearing Ratio Test
1 CBR, California Bearing Ratio
Test
Item 107 Overhaul
1 C, Laboratory Compaction Test
D, Field Density
For every 2500 cm or fraction
thereof:
Tests:
same as for items 104, 105,
200, 201, 202, 203, 204, 205, 206,
and 300
For every 1500 cm or fraction thereof:
1-
1 Q, Quality Tests (Grading,
Plasticity and Abrasion)
1 C, Laboratory Compaction
Test
Item 106 Compaction Equipment and Density
Control Strips
Tests:
For every 300 cu.m. or fraction
thereof:
For every 1500 cm or fraction
thereof:
Same as for item 104
For every 300 cm or fraction thereof
:
1 Q, Quality Test (Grading,
Plasticity, and Abrasion)
B. Mix
Item 105 Sub-grade preparation
For every 1500 cm or fraction
thereof:
For every 150 mm layer in uncompacted
depth
1 G, Grading Test
1 P, Plasticity Test (LL, PL, PI)
D.
Hydrated Lime
For every 100 t or fraction thereof:
1 Q, Quality Test
Item 204 Portland Cement Stabilized Road
Mixed Base Course
Amount of Cement to be Added:
6 to 10 mass percent of dry soil
aggregate
Tests:
A. Soil Aggregate:
Same as for item 203
3 to 12 mass percent of dry soil
aggregate
B. Cement
A. Soil Aggregate
C. Water
Tests:
For every 300 cu.m. or
fraction thereof:
1 G, Grading Test
1 P, Plasticity Test (LL, PL,
PI)
For every 1500 cu.m. or
fraction thereof:
1 Q, Quality test for every 2000
bags or fraction thereof
1 Q, Quality Test / Project
Engineers Certificate
D. Mix
For every 300 cu.m. or fraction
thereof:
1 C, Laboratory compaction
Test
1 UC, Unconfined Compression
Test
1 CBR, California Bearing Ratio
Test
C.
Water
Tests:
1 Q, Quality Test / Project
Engineers Certificate
D.
Mix
Tests: 1- Q, Quality test for every
40 t or 200 drums
Item 302 Bituminous Tack Coat
For every layer of 150 mm
compacted depth
1 D, Field Density for every 150
m or fraction thereof
Tests:
Amount of Asphalt to be added:
depth
Tests: same as the specified item no.
of the specifications
Item 206 Portland Cement Treated Plant Mix
Base Course
Amount of cement to be added:
6 to 10 mass % of dry soil aggregate
Soil Aggregate
Tests:
B.
Tests:
B.
same as for item 203
Portland Cement
Tests:
For every 2000 bags or fraction
thereof:
1 Q, Quality Test
thereof
For every 1500 cu.m. or fraction
1 C, Compaction Test
1 Q, Quality Test ( Grading,
Plasticity, and Abrassion)
For every layer of 150 mm of
compacted depth/base on the result
of compaction trials.
At least one group of three in-situ
density tests for each 500 sq.m. or
fraction thereof.
For crushed Gravel or crushed stone,
1500cu.m. or fraction thereof:
1 F, Fractured Face
Item 301 Bituminous Prime Coat
Item 305 Bituminous Penetration Macadam
Pavement
A.
Aggregate
Quantity;
1. Using Asphalt Cement or Rapid
Curing
Cover Aggregates
Coarse (Crushed)
90kg/sq.m.
Key (Crushed)_(13 &
11)_24kg/sq.m.
Cover (Crushed/Screened)_
8kg/sq.m.
Tests:
For every 75 cu.m./200
kg or fraction thereof:
Tests:
1 G, Grading Test
1 P, Plasticity Test (LL,PL,PI)
Tests: same as for item 301
Quantity: 5 to 14 kg/sq.m.
Item 300 Aggregate Surface Course
thereof
Using Emulsified Asphalt 1.58 to
2.04L/sq.m.
1 Q, Quality Test for every 40 t or
200 drums
SURFACE COURSE
For every 300 cu.m. or fraction
Bituminous Materials
Quantity: 0.2 to 1.5 L/sq.m.
Item 207 Aggregate Stockpile
Tests:
A.
A.
1 D, Field Density Test for every 150 m
or fraction thereof
1 T, Thickness determination for every
150m or fraction thereof
4 to 7 mass % of dry soil aggregate
A. Soil Aggregate same as for item
203
B. Emulsified Asphalt:
1 Q, Quality Test for every 40 t or
200 drums or fraction thereof
C. Mix same as for item 203
D. Compacted Base course same as
for item 203
Using Cut-Back Asphalt or
Asphalt Cement 1.58 to 2.04
L/sq.m.
Tests: 1 Q, Quality test for every
40 t or 200 drums
Item 303 Bituminous Seal Coat
For every layer of 150 mm compacted
Bituminous Materials
Quantity:
E. Compacted Base Course
1 T, Thickness Determination for
every 150 m or fraction thereof
Item 205 Asphalt Stabilized Road Mix Base
Course
B.
Quantity: 0.2 to 0.7 L/sq.m.
Tests same as for item 204
E. Compacted Base Course
1 Q, Quality Test for: (Grading,
Plasticity, Abrasion, Stripping,
and Bulk Specific Gravity)
1- F, Fractured face
Quantity: 1 to 2 L/sq.m.
1 G, Grading Test
2.
Item 304 Bituminous Surface Treatment
A.
Coarse (Crushed)
90kg/sq.m.
Choker (Crushed)
10kg/sq.m.
Key (Crushed)_(10 & 8)_
18kg/sq.m.
Cover
(Crushed/Screened)_8kg/sq.m.
Aggregate
Quantity:
Using Cut-Back Asphalt or
Asphalt Cement-13.6 to 38.0
kg/sq.m.
Using Emulsified Asphalt-13.6 to
19.04kg/sq.m.
Tests:
Tests: Same as for item 304
B.
For every 75 cu.m./200 kg or
Fraction thereof:
1 G, Grading Test
1 P, Plasticity Test (PL, LL, PI)
For every 1500 cu.m. or fraction
thereof:
Using Emulsified Asphalt
Bituminous Materials
Quantity: 7.2 to 11 L/sq.m.
Tests:
same as for item 301
Item 306 Bituminous Road Mix Surface
Course
A.
Aggregates
Tests: Same as for Item 304
B.
Bituminous Materials
Quantity:
1.
2.
Using Cut-Back Asphalt 4.5 to
7.0 mass % of total dry aggregates
Using Emulsified Asphalt 6.0 to
10.0 mass % of total dry
aggregates
Tests:
C.
Mix
Tests:
For every 75 cu.m. / 130 t or
fraction thereof:
1- G, Grading Test
1 Ext., Extraction
1 Sty., Stability
1 C, Laboratory Compaction Test
D.
D.
E.
Compacted Pavement
Item 307 Bituminous Plant Mix Surface Course
General
A.
E.
F.
A.
F.
Item 309 Bituminous Plant Mix (Stockpile
Maintenance Mixture)
B.
Tests: Same as for item 307
F.
Compacted Pavement
Tests: same as for item 307
Item 311 Portland Cement Concrete
Pavement
A.
Cement
1 G & P, Grading & Plasticity Tests:
(LL, PL, PI)
Compacted Pavement
Tests: 1 Q, Quality Test for every
40 t or 200 drums
Tests: For every 2000 bags or fraction
thereof
1 Q, Quality Test
C.
D.
E.
Aggregate
F.
Bituminous Material
Mix
B.
Tests: Same as for item 307
Quantity:
Hydrated Lime
1.
Tests: same as for item 307
2.
Mineral Filler
A.
Test: For every 1500 cu.m. or fraction
thereof:
Compacted Pavement
a.
Bituminous Materials
5.0 to 8.0 mass % of
Tests: 1 Q, Quality Test for every
40 t or 200 drums
C.
Mix
For a source not yet tested, or
failed previous quality test:
1- Q, Quality Test for: Grading,
Elutriation (wash), Bulk Specific
Gravity, Absorption, Mortar
Strength, Soundness, Organic
Impurities, Unit Weight, % Clay
Lumps and Shale.
Aggregate
Quantity:
total mix
Hydrated Lime
0.50 cu.m./cu.m. concrete (if
rounded coarse aggregate is used)
0.54 cu.m./cu.m. concrete ( if
angular coarse aggregate is used)
Tests: Same as for item 307
Tests: same as for item 307
B.
9.0 bags/cu.m. (40kg/bag)
Fine Aggregate
Item 310 Bituminous Concrete Surface
Course, Hot-Laid
Mix
Tests: same as for item 307
4 to 10 mass % of total
Tests: same as for item 307
Tests: Same as for item 307
D.
Mineral Filler
Quantity:
mix
Tests: 1 Q, Quality Test for every 40
t or 200 drums
Bituminous Materials
Tests: same as for item 307
B.
E.
Tests: For every 75 cu.m. or fraction
thereof:
Quantity:
1. Using Cut-Back Asphalt 4.5 to 7.0
mass % of total dry aggregate
2. Using Emulsified Asphalt 6.0 to
10.0 mass % of total dry
Aggregates
C.
Aggregate
Hydrated Lime
Tests: same as for item 307
Compacted Pavement
Tests: same as for item 307
A.
D.
Quantity:
Tests: same as for item 307
For every 1500 cu.m. or fraction thereof:
Quantity: 5 to 8 mass % of total dry
aggregate
Tests: 1 G & P, Grading and
Plasticity Tests (LL, PL, PI)
Tests: Same as for item 307
Bituminous Materials
Item 308 Bituminous Plant Mix Surface
Course, Cold Laid
1 G & P, Grading and Plasticity Tests
B.
Mineral Filler
D & T (Density & Thickness Test)
at least one but not more than three
samples shall be taken.
For every 75 cu.m. / 200 t or fraction
thereof:
1 Q, Quality Test for: (Grading,
Plasticity, Abrasion, Stripping, and
Bulk Specific Gravity)
1 F, Fractured Face
Hydrated Lime
Tests: For each full days operation:
Aggregates
Tests:
G, Grading Test
Ext., Extraction
Sty., Stability
C, Laboratory Compaction
Mineral Filler
For every 75 cu.m. or fraction
thereof:
1 Q, Quality Test
For each full days operation:
Tests:
D & T (Density and Thickness
Test) at least one but not more than
three (3) samples shall be taken.
Tests: For every 100 t or fraction
thereof:
For every 100 t or fraction thereof:
1 Q, Quality Test
Mix
1
1
1
1
Hydrated Lime
Tests:
E.
Tests: For every 75 cu.m. / 130 t or
fraction thereof :
Tests: Same as for Item 301
C.
1 Q, Quality Test for each
40 t or fraction thereof
b.
For a source previously tested and
passed quality test:
1 Q, Quality test ( Grading,
Elutriation (wash), Bulk Specific
Gravity, Absorption and Mortar
Strength)
For every 75 cu.m. or fraction
thereof:
1 - G, Grading Test
C.
Tests: For every 10,000 kg or fraction
thereof for each size
Coarse Aggregate
1 Q, Quality test (Bending, Tension,
and Chemical Analysis)
Quantity:
1.
2.
0.77 cu.m./cu.m. concrete ( if
rounded coarse aggregate is used)
0.68 cu.m./cu.m. cincrete ( if angular
coarse is used)
Test:
a.
Concrete
Tests: Flexural Strength Test on
concrete beam samples:
For every 1500 cu.m. or
fraction thereof:
1- set consisting of three beam
samples shall represent of 330
sq.m. of pavement, 230 mm
depth, or fraction thereof
placed each day Volume of
not more than 75 cu.m.
For a source not yet tested or failed
in previous quality tests:
1 Q, Quality Test for: Grading, Bulk
Specific Gravity, Absorption,
Abrasion, Soundness and Unit Weight
b.
H.
I.
Completed Pavement
For a source previously tested and
passed the quality tests:
Five (5) holes per km per lane or
five (5) holes per 500m when 2
lanes are poured concurrently
D.
Water
Tests: 1 Certificate from Project
Engineer or
1 Q, Quality Test, if source is
questionable
E.
Joint Filler
1.
2.
Special Curing Agents
Tests: 1- Q, Quality Test for each
shipment
G.
Item 400 Piling
A.
B.
Steel Bars
a.
Item 404 Reinforcing Steel
b.
Bar Reinforcement for concrete for
every 10,000 kg or fraction thereof
for each size:
For every 75 cu.m. or fraction
thereof:
1 Q, Quality Test
1 - G, Grading Test
Tests: 1 Inspection Report for each size
and shipment of Timber
Class A
concrete
Class B
concrete
Class C
concrete
Class P
concrete
9.0 bags/cu.m. of
b.
C.
Cement
(40 kg/bag)
Concrete
Tests: same a for item 405
Reinforcing Steel
Tests: same as for item 404
Concrete
Tests:
Same as for item 405, class C
B.
Reinforcing Steel
Tests:
Same a for item 404
0.68
9.5 bags/cu.m. of
11.0 bags/cu.m. of
B.
a.
Quantity: cu.m./cu.m. of concrete
0.54
Class A
Class B
0.50
0.45
0.52
For a source not yet tested or
failed in previous quality tests:
For a source previously tested and
passed the quality tests:
1- Q, Quality Test for: Grading,
Bulk Specific Gravity, Absorption
and Abrasion
For Rounded For
Angular
For Rounded For Angular
0.77
1 Q, Quality Test for: Grading,
Bulk Specific Gravity, Absorption,
Abrasion, Soundness and Unit
Weight
b.
Fine Aggregate
cu.m./cu.m. of concrete
Class B
0.82
0.73
Class C
0.70
0.68
Class P
0.68
0.65
Tests: For every 1500 cu.m. or
fraction thereof:
8.0 bags/cu.m. of
1 Q, Quality Test
Item 401 Railings
A.
Class A
Tests: For every 2000 bags or fraction
thereof
Structural Piles
Tests: 1 Q, Quality Test/Mill Test
Certificate
1 IR, Inspection Report
Coarse Aggregates
Quantity:
Quantity:
Concrete Piles
For a source previously tested and
passed quality test:
Wire and Wire Mesh
Item 405 Structural Concrete
A.
For a source not yet tested, or
failed previous quality test:
1 Q, Quality test ( Grading,
Elutriation (wash), Bulk Specific
Gravity, Absorption and Mortar
Strength)
1 Q, Quality Test for Bending,
Tension and Chemical Analysis
C.
0.59
0.47
1- Q, Quality Test for: Grading,
Elutriation (wash), Bulk Specific
Gravity, Absorption, Mortar
Strength, Soundness, Organic
Impurities, Unit Weight, % Clay
Lumps and Shale.
Tests:
1- Q, Quality Test or Mill Certificate
for each type of Materials used
1 Inspection Report for each type
and shipment of metal used
A.
0.53
0.44
Tests: For every 1500 cu.m. or fraction
thereof
Item 403 Metal Structures
Timber Piles
a.
Pre-molded Joint Filler
Tests: 1-Q, Quality Test on each
thickness of filler for each shipment
F.
BRDGE CONSTRUCTION
Poured Joint filler
Tests: 1 Q, Quality Test on each
type of ingredient for each
shipment
Class C
Class P
C.
For every 75 cu.m. or fraction thereof:
G, Grading Test
Tests:
1 Q, Quality Test or Mill Certificate
for each type of materials used
1 Inspection Report for each size
and shipment of Timber
Tests: Thickness determination by
concrete core drilling on a lot
basis
1- Q, Quality Test for: Grading, Bulk
Specific Gravity, Absorption and
Abrasion
1-
Item 402 Timber Structures
thereof:
For every 75 cu.m. or fraction
1 G, Grading Test
D.
Water
Tests: 1 Q, Quality Test, if source is
questionable / Certificate of
Project Engineer
E.
Pre-Molded Filler for Expansion Joints
Tests:
1 Q, Quality Test on each
thickness of filler for each
shipment
F.
Steel Reinforcement
Item 409 Welded Structural Steel
Tests: same as for item 403 and
inspection report
Item 410 Treated and Untreated Timber
1 Q, Quality Test for Preservatives
G.
Concrete
Tests:
Compressive strength test on
concrete cylinder samples. 1-set
consisting of 3-concrete cylinder
samples shall be taken from each days
pouring and to represent not more than
75 cu.m. o concrete or fraction thereof.
Item 406 Pre-stressed Concrete Structure
A.
Concrete
Tests: same as for item 405, Class P
B.
Steel Reinforcement
Tests: same as for item 404
C.
Wire Strand
Tests:
1 Q, for every 20 t or fraction thereof
Item 407 Concrete Structures
Tests:
Same as for item 403, 404, 405,
and 411 Elastomeric Bearing Pad
will be tested to determine its
quality
Item 408 Steel Bridges
Tests: same as for item 403 and 411
Painting:
1 Q, One 20-L can for every
100 cans or fraction thereof or
1 Q, One 4-L can for every
100 cans or fraction thereof
Item 500 Pipe Culverts and Storm Drains
A.
Alternatives Requirement:
1 set consisting of 3 concrete
cylinder samples for not more than 25
pipes cast in the field
1 Inspection Report for each size for
not more than 25 pipes cast in the
field
Cement, Fine Aggregates and Water
same as for item 405
B.
Item 501 Under drains
A.
B.
Concrete Pipe ( Non-Reinforced)
Tests: 0.5% of the number of pipes o
each size but not less than 2, for
strength, absorption and dimension
Alternatives Requirements:
1 set consisting of 3 concrete
cylinder samples for not more than 25
pipes cast in the field
Concrete
Lids, Cast Iron Frames and
Grating
Tests: Inspection Report
Item 503 Cleaning and Reconditioning
Existing Drainage Structures
Tests: Inspection Report
Item 504 Rip-rap and Grouted Rip-rap
Tests: same as for item 505
Item 505 Stone Masonry
A.
Cement
Quantity: 2 bags/cu.m. of concrete
Tests: for every 2000 bags or
fraction thereof
1 Q, Quality Test
Mortar for Joint
Tests: Cement, Fine Aggregates and
Water same as for item 405
Clay Pipe
Tests: same a for item 405, class A
Pipes
Tests:
1 Pipe for every 50 pieces: Strength,
Absorption and Dimension
Tests:
A.
1 Q, One 20-L can for every 100
cans or fraction thereof or
1 Q, One 4-L can for every 100
cans or fraction thereof
DRAINAGE AND SLOPE PROTECTION
STRUCTURES
B.
Item 502 Manholes, Inlets and Catch Basins
Tests:
Tests:
1 Q, Quality Test for every
10,000kg or fraction thereof for
each size
Tests: Inspection Report
Tests:
1 Pipe for every 200 pieces each
size, with a minimum of 2
specimens for strength, absorption
and dimension
Tests: Inspection Report for Timber
Item 411 Paint
1 Inspection Report for each size
for not more than 25 pipes cast in
the field
B.
concrete
Fine Aggregate
Quantity: 0.17 cu.m./cu.m. of
D.
1 Certificate from Project Engineer
1 Q, Quality Test, if source is
questionable
Item 506 Hand-Laid Rock Embankment
Tests: Inspection Report
Item 507 Sheet Piles
A. Timber Sheet Piles
Tests: Inspection Report
B. Concrete Sheet Piles
Tests: same as for item 400
C. Steel Sheet Piles
Tests: same as for item 403
Item 508 Concrete Slope Protection
A. Bed Course
Tests: same as for item 200
B. Steel Reinforcement
Tests: same as for item 404
C. Concrete
Tests: same as for item 405
Item 509 Gabions
Tests:
1 Q, Quality Test for each shipment
MISCELLANEOUS STRUCTURES
Item 600 Curb and or Gutter
A.
Tests: for every 2000 bags or
fraction thereof
Concrete
Quantity:
0.078 cu.m./m (curb only)
0.092 cu.m./m (Curb &
Gutter,Type A)
1- Q, Quality Test for:( same a for
item 405)
0.149 cu.m./m (Curb &
Gutter,Type B)
for every 75 cu.m. or fraction
thereof:
0.074 cu.m./m (Curb &
Gutter,Type C)
1 G, Grading Test
C.
Water
Tests: same as for item 405
Stone
B.
Joint Filler
Tests: same as for item 311
Item 601 Sidewalk
A.
concrete
Tests: same as for item 405, class A
B.
Pre-molded Expansion Joint Filler
Tests: same as for item 311
Item 602 Monuments, Markers, and Guide Post
A.
Concrete
Tests: same a for item 405
B.
Reinforcing Steel
Tests: same as for item 404
C.
Timber
Tests: same as for item 410
D.
Paint
Tests: Same a for item 411
Item 603 Guardrail
A. Steel Post
Tests: same as for item 403
B. Timber Post
Tests: same as for item 410
C. Concrete
Tests: same as for item 405
D. Reinforcing Steel
Tests: same as for item 404
E. Rail
Tests: Inspection Report
F. Paint
Tests: Same as for item 411
Item 604 Fencing
A. Barbed Wire, Chain Link Fabric
Tests: 1 Q, Quality Test
B. Concrete Post
Test: Same as for item 405
Steel Reinforcement:
Same as for item 404
Item 605 Road Sign
Tests: Inspection Report
Item 606 Pavement Markings
Tests: same as for item 411
Item 607 Reflective Pavement Studs
Tests: Inspection Report
Item 608 Topsoil
Tests: Inspection Report
Item 609 Sprigging
Tests: Inspection Report
Item 610 Sodding
Tests: Inspection Report
Item 611 Tree Planting
Tests: Inspection Report
MATERIALS DETAILS
Item 700 Hydraulic Cement
Tests: Same as for item 405
Item 701 Construction Lime
Tests: 1 Q, Quality Test for every 100
t or fraction thereof
Item 702 Bituminous Materials
Tests: same as for item
301,302,303,307,308,309, and 310
Item 703 Aggregates
Tests: same as for item of work
specified in the bill of quantities
Item 703A Mineral Filler
Tests: same as for item 307
Item 704 Masonry Units
Tests: 1 Q, Quality Test for every
10,000 units or fraction thereof
Item 705 Joint Materials
Tests: same as for items 311 and 500
Item 706 Concrete, Clay, Plastic, and Fiber
Pipe
Concrete Pipes
Tests: same as for item 500
Clay and other types of pipes
Tests: refer to the applicable
requirements of AASHTO Tests and
Specifications
Item 707 Metal Pipe
Tests: same as for item 400
Item 708 Concrete Curing Materials and
Admixtures
Tests: 1 Q, Quality Test for each
shipment
Item 709 Paints
Tests: same as for item 411
Item 710 Reinforcing Steel and Wire Rope
Reinforcing Steel
Tests: same as for item 404
Wire Rope
Tests: same as for item 406
Item 711 Fence and Guardrail
Fence
Tests: same as for item 604
Guardrail
Tests: same as for item 603
Item 712 Structural Metal
Tests: same as for items 403 and
409
Item 713 Treated and Untreated Timber
Tests: same as for item 410
Item 714 Water
Tests:
1 - Certificate from Project Engineer
1 - Q, Quality Test, if source is
questionable
