Series44 Self-operated Pressure Regulators
Type44-1B Pressure Reducing Valve
Type44-6B Excess Pressure Valve
Application
Set points from 0.2 to 20bar with valves G, G, and G1
as well as DN15, DN25, DN40, and DN50Nominal
pressure PN25Suitable for air up to 150C, nitrogen up to
200C, other gases up to 80C, and liquids up to 150C
Type44-1B Pressure Reducing Valve
The valve closes when the downstream pressure rises.
Type44-6B Excess Pressure Valve
The valve opens when the upstream pressure rises.
The regulators consist of a valve and an integrated actuator
with an operating bellows and a set point adjuster.
Special features
Low-maintenance proportional regulators requiring no
auxiliary energy
Wide set point range and convenient set point adjustment
Spring-loaded, single-seated valve without pressure balancing or plug by balanced a bellows
Stainless steel operating bellows as operating element
Compact design with particularly low overall height
Any mounting position possible
Valve body made of red brass, spheroidal graphite iron or
stainless steel
Meets TA Luft requirements concerning fugitive emissions
based on VDI2440
Fig.1: Type44-1B Pressure Reducing Valve, flanged body made
of stainless steel
Versions
Pressure regulators with actuator for 0.2 to 20bar set point
rangesRed brass or stainless steel body with screwed ends
G, G, and G1 (female thread)Stainless steel flanged
body DN15 and 25Spheroidal graphite iron flanged body
DN15, 25, 40, and 50
Type44-1B Pressure Reducing Valve (Fig.1 and
Fig.3)Regulator with valve PN25 for liquids up to 150C,
air up to 150C, nitrogen up to 200C, and other gases up
to 80C
Type44-6B Excess Pressure Valve (Fig.2)Regulator with
valve PN25 for liquids up to 150C, air up to 150C,
nitrogen up to 200C, other gases up to 80C, and steam up
to 200C
Special versions
With internal parts made of FKM (FPM), e.g. for use of mineral oils Spheroidal graphite iron body with wetted parts free
of non-ferrous metalPTFE-free versionVersion for flammable gases on requestRegulator prepared for pressure gauge
or external control line connection (connecting thread G1/8)
Version with FFKM (FFPM) internal parts with stainless steel
bodyFDA-compliant materials (max. 60C medium temperature)Version with electric set point adjustment up to G1
or DN25 for set points up to 10barVersion with pneumatic
set point adjuster up to G1 or DN25 as differential pressure
regulators up to G1 or DN25 Type44-6B for steam
Associated Information Sheet
u T 2500
Fig.2: Type44-6B Excess Pressure Valve, red brass body with
screwed ends
Fig.3: Type44-1B Pressure Reducing Valve, flanged body made
of spheroidal graphite iron
Edition February 2016
Data Sheet
T 2626 EN
Principle of operation (see Fig.4)
The medium flows through the valve in the direction indicated
by the arrow. The position of the plug determines the flow rate
across the area released between plug (2) and valve seat (3).
The Type44-1B Pressure Reducing Valve is open when relieved of pressure. The valve closes when the downstream
pressure (p2) rises above the adjusted set point.
The Type44-6B Excess Pressure Valve is closed when it is relieved of pressure. The valve opens when the upstream pressure rises above the adjusted set point.
In both versions, the pressure to be kept constant is transmitted
through a hole (4) in the valve body (1) to the operating
bellows (5) where it is converted into a positioning force. It
moves the valve plug depending on the spring rate of the set
point springs (7) and the set point adjuster (8) or set point
adjusting screw (9) (8 to 20bar set point range and for
version with stainless steel or spheroidal graphite iron body in
DN40/50).
1
6
p1
p1
2
3
p2
p2
1
3
2
6
4
5
Type44-6B Excess Pressure Valve
Body with screwed ends (female thread)
7
Stainless steel/spheroidal graphite iron version (DN40/50 only) and
8 to 20bar set point range Set point adjustment at hexagonal socket
head screw
Type44-1B Pressure Reducing Valve
Body with screwed ends (female thread)
11 8
Special version
Connecting thread G1/8A for a
pressure gauge or external control
line Dimensions in mm
1
Stainless steel version Leakage
line connection
p2
p1
2
3
4
Stainless steel version Cleaning connection (special version)
Special versions
5
7
1
2
3
4
Type44-1B Pressure Reducing Valve
Flanged body made of spheroidal graphite iron
Valve body
Plug
Seat
Borehole for control
pressure
Operating bellows
6
7
8
9
Balancing bellows
Set point spring
Set point adjuster
(handwheel)
Set point screw
Fig.4: Functional diagrams
T 2626 EN
Table1: Technical data All pressures in bar (gauge)
Valve
Type44-1B Pressure Reducing Valve
Nominal pressure
PN 25
Stainless steel/red brass body
Connection
Female thread G, G, G1
Stainless steel body
Flanges DN15 and 25
Spheroidal graphite iron body
Flanges DN15, 25, 40, and 50
Liquids 1)
Max. permissible Air and non-flammable gases
temperature
Steam 1)
Max. perm.
differential
pressure p
150C
80C
1)
200C
Nitrogen 1)
200C
G, G, G1|DN15, DN20
16bar
DN40 and 50
8bar
0.05% of KVS coefficient
Leakage class according to IEC605344
Compliance
Set point range (continuously adjustable)
0.2 to 2bar1 to 4bar2 to 6bar4 to 10bar8 to 20bar 2)
Max. permissible ambient temperature
1)
2)
Type44-6B Excess Pressure Valve
60C
The maximum permissible temperature is limited to 60C with FDA compliance.
Set point range not for DN40 and 50.
Table2: Max. permissible pressure at actuator
Screwed ends
Connection size
KVS coefficients
Standard version
3.2 1)
4 1)
Special version, unbalanced
xFz values
0.25
0.60
2)
G1
5 1)
0.4 1
1)
2.5
0.60
0.55
Flanges
Nominal size
KVS coefficients
Standard version
Special version, unbalanced
xFz values
1)
2)
DN15
DN25
DN40
3.2 1)
5 1)
16
0.25
2)
0.4 1
0.60
1)
DN50
20
2.5
0.55
2)
0.4
Also available as special version for regulators with stainless steel body and FKM (FPM) soft seal
Only with Type44-1B, metal seal
Table3: MaterialsMaterial numbers according to DIN EN
Body
Red brass CC499K
Seat
Balancing bellows
Plug spring
Set point spring
Operating bellows
Spring housing
Set point adjuster
1)
2)
3)
Stainless steel 1.4408
1.4305
Type44-1B Type44-6B
Plug
Spheroidal graphite iron
EN-JS1049
Type44-6B (steam regulator)
1.4404
Brass (free of dezincification), soft seal
1)
1.4404 metal or soft seal 2)
Brass (resistant to dezincification) with PTFE soft seal or
metal seal1)
1.4404 with FKM (FPM)/
PTFE soft seal or metal seal
1.4571
1.4571
1.4310
1.4310
1.7104 (55SiCr6)
1.4310
1.4571
1.4571
EN AC-44300-DF (die-cast aluminum)
1.4408
Manual adjuster made of PTFE with 30% glass fiber 3)
Hexagonal socket head
screw made of 1.4571
For spheroidal graphite iron valves with internal parts free of non-ferrous metal: plug made of 1.4404, metal or soft seal
EPDM, FFKM (FFPM) or PTFE
8 to 20bar set point range: hexagonal socket head screw made of 1.4571
T 2626 EN
Table4: Versions and KVS coefficients
Plug with soft seal
Version with ...
KVS coeffi- Type 44-1B
cients
Type 44-6B
Plug with metal seal
EPDM/FKM (FPM)
Stainless steel with FFKM
(FFPM)
PTFE
0.25 1 2.5 3.2 4 5
1 3.2 4 5
0.25 0.4 1
1 2.5 3.2 4 5
1 3.2 4 5
3.2 4 5
0.4 1
Table5: Seal materials and max. medium temperatures
Plug seal
Medium max. temperature2)
Water Up to 150C
EPDM
Oil-free air Up to 80C
Nitrogen Up to 80C
Mineral oil Up to 150C
FKM (FPM)
Air Up to 150C
Nitrogen Up to 200C
Steam Up to 200C
PTFE 1)
Liquids Up to 150C
FFKM (FFPM)
1)
2)
Gases Up to 80C
Only for Type44-6B
Limited to 60C with FDA compliance
Installation
The following applies:
The direction of flow must match the direction indicated by the arrow on the body
Any mounting position possible
Further details can be found in uEB 2626-1 and uEB 2626-2.
Flow rate diagram for water
Q
100
[mh ]
KVS
50
20
16
20
10
8
5
4
3.2
2.5
5
2
0.4
0.5
0.2
0.2
0.1
0.01
p
0.05 0.1
0.5
10 [bar]
Fig.5: Flow rate diagram for water
T 2626 EN
Table6: Dimensions and weights
Regulator with body with screwed ends Red brass Stainless steel 1.4408
Connection size
Female thread G
G1
Length L
65 mm
75 mm
90 mm
Width across flats SW
34 mm
34 mm
46 mm
1.0 kg
1.1 kg
1.5 kg
Weight, approx.
Stainless steel/red brass
Dimensions of the regulators with body with screwed ends
Body: red brass
L
SW
SW
45
25
130
(170)1)
165
(205)1)
90
Dimensions in parentheses apply to
regulators with 8 to 20bar set point range
90
Type44-1B Pressure Reducing Valve
1)
Type44-6B Excess Pressure Valve
8 to 20bar set point range; set point adjustment at hexagonal socket head screw
Body: stainless steel
SW
SW
45
46
G
155
(205)
155
(205)
90
Dimensions in parentheses apply to
regulators with 8 to 20bar set point range
Type44-1B Pressure Reducing Valve
90
Type44-6B Excess Pressure Valve
Fig.6: Dimensions in mm
T 2626 EN
Table7: Dimensions and weights
Regulator with flanged body Spheroidal graphite iron EN-JS1049 Stainless steel 1.4408
Nominal size
DN 15
DN 25
DN 40
DN 50
Length L
130 mm
160 mm
200 mm
230 mm
Height H1
155 mm
155 mm
245 mm
245 mm
Height H2
95 mm
95 mm
2.6 kg
4.2 kg
7 kg
8 kg
Weight, approx.
Dimensions of the regulators with body with screwed ends
Body: stainless steel
Body: spheroidal graphite iron EN-JS1049
L
L
H2
H1
H1
DN15/25 version with manual adjuster
DN 40/50 and 8 to 20bar set point
range with adjusting screw
Type44-1B Pressure Reducing Valve and Type44-6B Excess Pressure Valve
Fig.7: Dimensions in mm
Ordering text
Type44-1B Pressure Reducing Valve for liquids and gases
or
Type44-6B Excess Pressure Valve for liquids, gases, and steam
Body material: red brass, stainless steel or spheroidal graphite iron
Version with screwed ends G or flanged valve body DN
Set point range bar, KVS coefficient ...
Plug seal: EPDM, FKM (FPM), FFKM (FFPM), PTFE, metal seal, steam version (special version of Type44-6B)
Special version
T 2626 EN
T 2626 EN
SAMSON AG MESS- UND REGELTECHNIK
Weismllerstrae 3 60314 Frankfurt am Main, Germany
Phone: +49 69 4009-0 Fax: +49 69 4009-1507
[email protected] www.samson.de
T 2626 EN
2016-02-23 English
Specifications subject to change without notice
