Scribd
Upload
2K views1 page

Specifications Virgin Fuel Oil D6: Method Units Test Result Unit

This document outlines the specifications and test results for Virgin Fuel Oil D6. It lists 24 ASTM test methods measuring properties such as density, API gravity, pour point, flash point, sulfur content, viscosity, water content, ash content, conversion to SUS/SFS, and aluminum and silicon content. The results meet the specifications, with density between 0.87-0.88 kg/t, pour point below -36°C, flash point above 117°F, sulfur content below 0.358%, and viscosity below 18.12 mm2/s. Additional tests measured properties including asphaltene content, and levels of aluminum, silicon, sodium, vanadium, calcium, zinc, phosphorus and iron

Uploaded by

David garza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Specifications Virgin Fuel Oil D6: Method Units Test Result Unit

This document outlines the specifications and test results for Virgin Fuel Oil D6. It lists 24 ASTM test methods measuring properties such as density, API gravity, pour point, flash point, sulfur content, viscosity, water content, ash content, conversion to SUS/SFS, and aluminum and silicon content. The results meet the specifications, with density between 0.87-0.88 kg/t, pour point below -36°C, flash point above 117°F, sulfur content below 0.358%, and viscosity below 18.12 mm2/s. Additional tests measured properties including asphaltene content, and levels of aluminum, silicon, sodium, vanadium, calcium, zinc, phosphorus and iron

Uploaded by

David garza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SPECIFICATIONS VIRGIN FUEL OIL D6

Method Units
ASTM D5002
ASTM D1298-99
ASTM D97

ASTM D93-IP34

ASTM D4294
ASTM D445
ASTM D6304
ASTM D482
ASTM D2161

ASTM D5184
ASTM D95
ASTM D4530.06

Test
Density and Relative Density of
Crude Oils
Average API Gravity
Density @15 Deg C
Pour Point of Petroleum Products
Pour Point
Pour Point
Pensky-Martens Closed Cup Flash
Point
Corrected Flash Point
Sulfur Content in Petroleum
Products by EDXRF
Sulfur Content
Kinematic/Dynamic Viscosity
Kinematic Viscosity @ 122F / 50C
Water Content by Coulometric
Karl Fisher Titration
Water Content
Ash from Petroleum Products
Average Ash
Conversion of Kinematic Viscosity
To SUS/SFS 1Saybolt furoi
viscosity 122F
Aluminum and Silicon in Fuel Oils
by ICP-AES or AAS
Aluminum Content
Silicon Content
Water by Distillation, Vol%
Carbon Residue

Result

Unit

29.7 (29.7) (Min)


0.87 (0.8775) (Max)
< -33 (-36) (BELOW ZERO)
< -27.4 (-32.8) (BELOW
ZERO)

API
Kg/t

117 (137) (MIN)

0.38 (0.358) (MAX)

Wt%

17.83 (18.12) (MAX)

Mm2/s

0.20 (0.7) (MAX)

Wt%

0.279 (1.007) (MAX)

Wt%

10.9SFS

(MAX)

102 (MAX)
93 (MAX)
0.70 (MAX)
1.11 (MAX)

Mg/kg
Mg/kg
Vol%
Wt%

Method Test Result Units


IP 143 Asphlteness Heptane lnsolubles
Asphaltene Content
0.08
IP 501 Determination of AL,Si,V,Ni,Fe,Na,Ca,Zn,P in Fuel Oil-ICPES
Aluminium
372
Silicon
187
Sodium
117
Vanadium
1
Calcium
779
Zinc
298
Phosphorus
4176
Iron
545

C
F

Wt%
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg

You might also like