2013/2014

World Class Test Equipment

IEC/EN 61243-3
DIN VDE 0682-401

Testing, Measuring and

Safety Instruments

BENNING World Class Test Equipment

The new generation of DUSPOL voltage testers

safe voltage testing up to 1000 V
The international standard for voltage testers
IEC/EN 61243-3 (DIN VDE 0682-401):2011 increases
safety for work under voltage
The new generation of DUSPOL voltage testers exceeds the
demands of the standards concerning both the protection category for housings (IP 65) and overvoltage protection (CAT IV
600 V). The nominal voltage range has been increased to a
minimum of 1000 V AC/DC in order to ensure safe testing of
increased system voltages of industrial applications, photovoltaic systems and wind power plants as well as of hybrid
automotive engineering.

Your work as an expert requires safe testing. Therefore, you

should not make any compromises concerning safety!
Voltage testers which are used on electrical systems of up to
1000 V have to comply with the standard IEC/EN 61243-3
(DIN VDE 0682-401):2011. The standard creates uniform
testing and safety criteria on an international level and remarkably which concentrates on user safety.

CAT IV 600 V

CAT IV 600 V

CAT IV 600 V

DUSPOL analog

DUSPOL expert

DUSPOL digital

All DUSPOL voltage testers are equipped with a direct display

system without loading the test point. In case of need, a load
circuit can be connected via a push-button which suppresses
inductive and capacitive reactive voltages. Thus, it is possible
to clearly distinguish between high-energy and low-energy
electric circuits.

Stand-by case
010911
(see page 18)

AC
1000 V D
C
V
1200

1000 VC
AC/D

1000 VC
AC/D

A vibrating motor can be activated additionally. The vibrating

power of this motor increases proportionally to the applied voltage. This is an additional indication of voltage being applied.

The DUSPOL voltage testers underlines once again the

BENNING expertise in the field of testing, measuring and
safety technology. With a DUSPOL voltage tester you acquire an innovative product which has been tested and approved by the independent VDE Test and Certification
Institute.

DUSPOL voltage testers

The original!
Product safety at the highest level:
safe voltage testing up to 1000 V AC/DC
direct display without actuating a push-button
(high-impedance testing)
load connection via push-button
(low-impedance testing)
battery-independent voltage indication
from 50 V AC/DC on
vibration alert in the test handle
robust round housing with rubberized gripping
surface for outdoor use (protection category IP 65)
tested and approved in compliance with the current
DIN EN 61243-3 (VDE 0682-401):2011 standard

BENNING World Class Test Equipment

DUSPOL voltage testers the testers with the VDE mark of conformity
safe, reliable and powerful
The new generation of DUSPOL voltage testers
safe voltage testing up to 1000 V AC/DC
load connection with vibration alert
intentional tripping of a 30 mA RCD
phase sequence test in a three-phase mains
single-pole external conductor test (phase)
Additionally for DUSPOL expert, DUSPOL digital:
acoustic continuity test with loud test buzzer and visual
indication by means of yellow LED
measuring point illumination by means of white
high-power LED
phase sequence test by means of green LED (left/right)
detector for non-contact localization of cable breaks on
exposed and live lines

Additionally for DUSPOL digital:

voltage testing up to 1000 V AC TRUE RMS/1200 V DC
TRUE RMS measuring method
low-volt range: 1.0 V to 11.9 V
frequency indication up to 1000 Hz
resistance measurement up to 300 k
conducting-state voltage measurement of diodes
automatic LC display illumination by means of a light sensor

phase-sequence test
(counter-clockwise/clockwise)
single-pole phase test:
R symbol for AC voltage
measuring point
illumination
acoustic and optical
continuity test
frequency indication
voltage indication
1 1000 V AC TRUE RMS
1 1200 V DC
resistance measurement and
diode test with conductingstate voltage indication
LC display with
background lighting
sensor of non-contact
cable break detector

CAT IV
600 V

load connection
via push buttons
vibrating alert
in the test handle

tested and
approved

housing with
protection against
dust and water jets

IEC/EN 61243-3
(DIN VDE 0682-401)
:2011 standard

Voltage and Continuity Tester

indication
indication steps
frequency range
acoustic and visual
continuity test
diode test
resistance measuring range
phase-sequence test
single-pole outer conductor test
polarity test
cable break detector
load connection
via push button
vibrating alarm
measuring point illumination
protection class
item no.

DUSPOL analog
plunger system (illuminated)/LED
12 1000 V AC/DC

LCD (R symbol)
LCD (R symbol)
LED (+/-)

IS = 600 mA (1000 V)
30 mA RCD trip
yes

IP 65
050261

DUSPOL expert
DUSPOL digital
LED
LED/LCD (illuminated)
12 1000 V AC/DC
1.0 1000 V AC/1200 V DC

1 1000 Hz
buzzer + yellow LED
buzzer + yellow LED
0 100 k
0 100 k
conducting-state/
0.3 2.0 V
non-conducting direction

0.1 k 300 k
green LEDs (right/left)
green LEDs (right/left)
red lightning LED
red lightning LED
LED (+/-)
LCD (+/-)
yellow LED (flashing)
yellow LED (flashing)
IS = 550 mA (1000 V)
IS = 550 mA (1000 V)
30 mA RCD trip
30 mA RCD trip
yes
yes
white LED
white LED
IP 65
IP 65
050262
050263

PROFIPOL
LED
6 400 V AC/DC

LED (+/-)

IP 65
020022

PROFIPOL

BENNING World Class Test Equipment

Digital Multimeter BENNING MM P3, MM 1-1 MM 1-3, MM 1 MM 4

reliable and precise in each and every situation
BENNING MM P3
Pocket-Size Digital Multimeter

BENNING MM 1-1, MM 1-2 and MM 1-3

Digital Multimeters with Volt Sensor Function

top-class functionality and design

even smaller and narrower with lower weight (only 130 g)
minimum dimensions: 132 x 86 x 19 mm
for all-purpose use with leather case and measuring leads

the integrated Volt sensor signalises phase voltages by

means of an acoustic signal and a red LED signal
it localizes cable breaks and defective lamps in exposed
cables (cable reel, light chains) via the feeding side of the
phase

volt sensor
volt sensor

volt sensor

MM 1-1

MM 1-2

MM P3

MM 1-3

BENNING MM 1, MM 2, MM 3 and MM 4
Digital Multimeter
Technology that inspires, Quality that convinces
basic measuring for current, voltage, resistance, continuity,
diode, capacity and frequency
automatic and/or manual measuring range selection
safe current measuring up to 300 A AC via attachable current clamp adapter (MM 4)

MM 1
MM 3

MM 2

Digital Multimeter

MM 4

indicating range
basic accuracy
AC voltage
DC voltage
AC current
DC current
resistance
continuity/diode
frequency
capacity
temperature
volt sensor
interface
software
memory
Data Log function
measuring method
measuring category
item no.

BENNING
BENNING
MM P3
MM 1-1
5000
2000
0.6 %
0.5 %
0.1 mV 600 V 0.1 mV 750 V
0.1 mV 600 V 0.1 mV 1000 V

0.1 40 M 0.1 20 M
yes/yes
yes/yes
1 mHz 5 MHz

10 pF 100 F

yes

HOLD
HOLD

RMS
RMS
CAT III 300 V
CAT III 600 V
044084
044081

BENNING
MM 1-2
2000
0.5 %
0.1 mV 750 V
0.1 mV 1000 V
1 mA 10 A
1 mA 10 A
0.1 20 M
yes/yes
1 Hz 20 MHz
1 pF 2 mF

yes

HOLD, MAX/MIN

RMS
CAT III 600 V
044082

BENNING
MM 1-3
2000
0.5 %
0.1 mV 750 V
0.1 mV 1000 V
1 mA 10 A
1 mA 10 A
0.1 20 M
yes/yes
1 Hz 20 MHz
1 pF 2 mF
-20 C up to +800 C
yes

HOLD, MAX/MIN

RMS
CAT III 600 V
044083

BENNING
BENNING
MM 1
MM 2
3200
2000
0.5 %
0.5 %
1 mV 600 V 0.1 mV 750 V
0.1 mV 600 V 0.1 mV 1000 V

0.1 A 20 A
0.1 A 3.2 mA 0.1 A 20 A
0.1 32 M 0.1 20 M
yes/yes
yes/yes

HOLD

RMS
RMS
CAT III 600 V
CAT III 600 V
044027
044028

BENNING
MM 3
2000
0.5 %
0.1 mV 600 V
0.1 mV 600 V
0.1 A 20 A
0.1 A 20 A
0.1 20 M
yes/yes
1 Hz 200 kHz
1 pF 200 F

RMS
CAT III 300 V
044029

BENNING World Class Test Equipment

Digital Multimeter BENNING 7-1 MM 11

safety and functional diversity without any compromises
BENNING MM 7-1
Digital Multimeter offering highest safety
for industrial applications

BENNING MM 9, MM 10
Digital Multimeter of the highest measuring
category CAT IV

TRUE RMS measuring method for precise measuring

results even for non-sinusoidal signal characteristics
highest measuring category CAT IV 600 V for highest safety
AutoV function for automatic AC/DC voltage detection and
low input impedance (LoZ) to suppress capacitively/inductively induced voltages
integrated Volt sensor for non-contact signalling of phase
voltages and cable breaks in lines
LC display with bargraph indication and background lighting

highest measuring category CAT IV 600 V allows measurements direct at the source of the low-voltage installation
precise due to TRUE RMS measuring method
transmitting measuring results via optical USB interface
delivery including software BENNING PC-Win MM 10

USB

volt sensor

USB

CAT IV 600 V
TRUE RMS

CAT IV 600 V
TRUE RMS

MM 9

MM 10

BENNING MM 11
Precision Digital Multimeter
with extraordinary features of performance

CAT IV 600 V
TRUE RMS

highest measuring accuracy of 0.06 % due to TRUE RMS

measuring method and 20000 digit resolution
an ideal measuring device for recording of measuring processes
large memory capacity of 1000 storage locations and
40000 storage locations for Data Log functions
transmitting measuring results via optical USB interface
delivery including software BENNING PC-Win MM 11

TRUE RMS
MM 11

MM 7-1

Digital Multimeter

indicating range
basic accuracy
AC voltage
DC voltage
AC current
DC current
resistance
continuity/diode
frequency
capacity
temperature
volt sensor
interface
software
memory
Data Log function
measuring method
measuring category
item no.

BENNING
MM 4
4200
0.5 %
1 mV 600 V
1 mV 600 V
0.1 A 300 A

0.1 42 M
yes/yes

HOLD

RMS
CAT III 300 V
044073

BENNING
BENNING
MM 7-1
MM 9
6000
6000
0.08 %
0.5 %
10 V 1000 V 0.1 mV 750 V
10 V 1000 V 0.1 mV 1000 V
10 A 10 A
1 mA 10 A
10 A 10 A
0.1 A 10 A
0.1 40 M 0.1 60 M
yes/yes
yes/yes
0.01 Hz 100 kHz 1 Hz 60 MHz
1 nF 10 mF
1 pF 6 mF
-40 C up to +400 C

yes

HOLD, MAX/MIN HOLD, MAX/MIN

TRUE RMS
TRUE RMS
CAT IV 600 V
CAT IV 600 V
044085
044078

BENNING
MM 10
6000
0.5 %
0.1 mV 750 V
0.1 mV 1000 V
1 mA 10 A
0.1 A 10 A
0.1 60 M
yes/yes
1 Hz 60 MHz
1 pF 6 mF

USB
PCWin MM 10
HOLD, MAX/MIN

TRUE RMS
CAT IV 600 V
044079

BENNING
MM 11
20000
0.06 %
1 V 750 V
1 V 1000 V
1 A 10 A
1 A 10 A
10 m 2 G
yes/yes
0.01 Hz 1 MHz
1 pF 40 mF
-200 C up to +1200 C

USB
PCWin MM 11
1000 memory locations
40000 memory locations
TRUE RMS
CAT III 600 V
044080

BENNING PC-Win MM 10/MM 11

Software for logging and analysis
software for reading and logging of measurement series
visualisation of measurement series via line diagram and table
scanning rate variable from 0.5 sec. up to 10 min.
storage of measurement series as text file

Software PC-Win MM 10/MM 11

All Digital Multimeters

including protective case,
safety leads and battery set.

BENNING World Class Test Equipment

Digital Current Clamp Multimeter

BENNING CM 1-1 CM 1-3, CM 2, CM 3, CC 1 CC 3
BENNING CM 1-1, CM 1-2 and CM 1-3
Digital Current Clamp Multimeter for AC current
Innovative technology, practical design

BENNING CM 2 and CM 3
Digital Current Clamp Multimeter for
AC/DC current

safe current measuring up to 400 A AC

measuring inputs for voltage, resistance, continuity and
diode test
integrated volt sensor signalises phase voltages by means
of an acoustic signal and a red LED signal (CM 1-3)
it localizes cable breaks and defective lamps in exposed
cables (cable reel, light chains) via the feeding side of the
phase (CM 1-3)

safe and non-contact measuring of high currents

DC and AC current measuring up to 600 A AC/DC
measurement of low currents (automotive, photovoltaics,
industry) (CM 2)
measuring inputs for voltage, resistance and continuity
test (CM 2)
precise due to TRUE RMS measuring method (CM 2)

volt sensor

Our !
er
best sell

TRUE RMS

CM 1-2

CM 2

CAT IV 600 V

CM 1-1

CM 3

CM 1-3

BENNING CC 1, CC 2 and CC 3
AC and AC/DC current clamp adapters
safe AC current measuring up to 200 A/400 A
connection via 4 mm safety measuring leads
output: 1 mV AC per
1 A AC

output: 1 mA AC per
1 A AC

output: 1 mV/10 mV AC/DC

per 1 A AC/DC

suitable for BENNING ...

MM 1-1/1-2/1-3,
MM 2/3/7-1/9/10/11

suitable for BENNING ...

IT 120 B, MM 1-2/1-3,
MM 2/3/7-1/9/10/11

suitable for BENNING ...

PV 1-1, MM 1-1/1-2/1-3,
MM 2/3/7-1/9/10/11

CC 1

CC 2

CC 3

Digital Current Clamp Multimeter/Current Clamp Adapter

indicating range
basic accuracy
AC voltage
DC voltage
AC current
DC current
resistance
continuity/diode
frequency
effective power
power factor (cos )
temperature
volt sensor
memory
measuring method
max. clamp opening
measuring category
item no.

BENNING
CC 1

1.9 %

1 A 400 A

30 mm
CAT III 300 V
044037

BENNING
CC 2

1%3%

0.5 A 200 A

21 mm
CAT III 600 V
044110

BENNING
CC 3

1%2%

0.2 A 300 A
0.2 A 300 A

25 mm
CAT III 600 V
044038

BENNING
BENNING
BENNING
CM 1-1
CM 1-2
CM 1-3
2000
2000
2000
2%
1%
1%

0.1 V 600 V
0.1 V 750 V

0.1 V 600 V 0.1 V 1000 V

10 mA 400 A 0.1 A 400 A
0.1 A 200 A

0.1 20 M 0.1 20 M
/
yes/
yes/yes

yes
HOLD, MAX
HOLD
HOLD
RMS
RMS
RMS
30 mm
30 mm
16 mm
CAT III 600 V
CAT III 600 V
CAT IV 600 V
044061
044062
044063

BENNING
CM 2
4000
0.5 %
1 mV 600 V
0.1 mV 600 V
100 mA 300 A
10 mA 300 A
0.1 40 M
yes/

HOLD, MAX
TRUE RMS
25 mm
CAT III 300 V
044035

BENNING
CM 3
2000
1.9 %

0.1 A 600 A
0.1 A 600 A

HOLD
RMS
38 mm
CAT III 300 V
044031

BENNING World Class Test Equipment

Digital Current Clamp Multimeter

BENNING CM 4, CM 6, CM 7
Digital Current Clamp Multimeter of the highest
measuring category
precise due to TRUE RMS measuring method
safe current measuring up to 1000 A AC/DC
highest measuring category CAT IV 600 V offering optimum
safety

ESTAUTOTtion
func

BENNING CM 4 CM 9

BENNING CM 8
Power Current-Clamp Multimeter
Power analysis for single-phase and
three-phase mains
TRUE-RMS measurements up to 1000 V, 600 A AC/DC
effective power measurements up to 600 kW
calculation of the power factor cos
indication of the load type (inductive, capacitive)
bipolar phase sequence test in three-phase mains
measuring inputs for voltage, resistance, continuity, diode,
frequency and temperature
measurement of inrush currents (motors etc.)

BENNING CM 9
TRUE RMS Leakage Current Clamp with a Resolution of 1 A
The alternative solution for insulation measurements
measurement of leakage currents and differential currents
in electrical systems (VDE 0100) and devices (VDE 07010702, BGV A3, BetrSichV ( = German Health and Safety at
Work Regulations))
highest resolution of 1 A in the 6 mA measuring range
measurement without switch-off during normal operation
of the system/device, the perfect solution for preventive
maintenance
precise and reproducible measuring results up to 100 A
optimum screening against external magnetic fields

CAT IV 600 V
TRUE RMS

CAT IV 600 V
TRUE RMS

CM 5-1

CM 7
(CM 6 fig. similar)

BENNING CM 5-1
Digital Current-Clamp Multimeter
automatic selection of the correct measuring function for TRUE
RMS voltage/current (AC/DC), resistance, continuity and diode test
safe and easy operation measuring errors due to incorrect
measuring range selection are excluded
short response time due to 5 scanning values per second
voltage measurement with low input impedance (LoZ) to
suppress capacitively/inductively induced voltages

TRUE RMS
CM 8
(CM 4 fig. similar)

Differential current measurement method with BENNING CM 9

0 mA
FI/RCD
L
N
PE

25 mA

0 mA

0 mA

0 mA

25 mA

25 mA

Digital Current Clamp Multimeter

indicating range
basic accuracy
AC voltage
DC voltage
AC current
DC current
resistance
continuity/diode
frequency
effective power
power factor (cos )
temperature
volt sensor
memory
measuring method
max. clamp opening
measuring category
item no.

BENNING
BENNING
BENNING
CM 4
CM 5-1
CM 6
4000
9999
4000
0.7 %
0.9 %
0.7 %
0.1 V 600 V
1.3 V 750 V
0.1 V 750 V
0.1 V 600 V 0.7 V 1000 V 0.1 V 1000 V
0.1 A 600 A
0.9 A 600 A 0.1 A 1000 A

0.9 A 600 A

0.1 400 1 10 k 0.1 400

yes/
yes/yes
yes/
1 Hz 400 Hz

1 Hz 400 Hz

HOLD, MAX/MIN
HOLD, MAX/MIN
HOLD
PEAK
PEAK
RMS
TRUE RMS
RMS
37 mm
35 mm
53 mm
CAT III 600 V
CAT IV 600 V
CAT IV 600 V
044056
044066
044058

BENNING
CM 7
4000
0.7 %
0.1 V 750 V
0.1 V 1000 V
0.1 A 1000 A
0.1 A 1000 A
0.1 400
yes/
1 Hz 400 Hz

HOLD, MAX/MIN
PEAK, ZERO
TRUE RMS
53 mm
CAT IV 600 V
044059

BENNING
CM 8
6000
0.7 %
10 mV 1000 V
10 mV 1000 V
0.1 A 600 A
0.1 A 600 A
0.1 20 k
yes/yes
0.1 Hz 4 kHz
1 W 600 kW
0.00 1.00
-50 C up to +1000 C

HOLD, MAX/MIN
PEAK, INRUSH
TRUE RMS
40 mm
CAT III 600 V
044064

BENNING
CM 9
6000
1%

1 A 100 A

Leakage
TRUE RMS
CM 9

HOLD, PEAK
TRUE RMS
40 mm
CAT III 300 V
044065
differential current measurement method

BENNING World Class Test Equipment

BENNING ST 710 Appliance Tester (VDE 0701-0702)

mobile and network-independent testing of electrical appliances
BENNING ST 710
Battery-operated Appliance Tester for
mobile testing of electrical devices

Features BENNING ST 710

testing in compliance with DIN VDE 0701-0702 (EN 62638),

BGV A3, BetrSichV (German Health and Safety at Work
Regulations), VE/NORM E 8701, NEN 3140
easy - operation by means of three keys
quick - complete testing within 10 seconds
mobile - testing can be made network-independently

Application
Safety-related testing of electrical devices/work equipment
such as e.g. electrical devices/tools with ON/OFF switch,
motorized equipment, lamps, cable reels, multiple distributors
and household appliances. The protective conductor current/
contact current is measured by means of the alternative
leakage current measurement method.

automatic testing procedure for devices of class I (key 1),

class II/III (key 2) and line test (key 3)
testing of cable reels, multiple distributors and device
connecting cables with rubber connector
measuring result with pass/fail information
limiting values preset in compliance with DIN VDE standard
indication of correct function key in case of incorrect operation and if the test sample is not switched on
sufficient battery capacity (6 x 1.5 V, mignon, AA, IEC LR6)
for > 2500 test samples
three-phase test objects can be tested by means of
optional measuring adapter

Measuring functions
protective conductor resistance with a testing current of
200 mA DC and automatic polarity reversal
insulating resistance with a testing voltage of 500 V DC
protective conductor current and contact current by means
of alternative leakage current measurement method
voltage measurement on external shock-proof socket (L-N,
L-PE, N-PE)

TRUE RMS

cates for are

test certifi
Forms for f electrical devices
Testing o r download free of
available [Link]!
charge at

Shock-proof socket onto

shock-proof plug for CM 9

16 A/32 A CEE coupling onto

CEE plug, 5-pin, for CM 9

Leakage
CM 9

Test badges

BENNING ST 710
Battery-operated Appliance Tester
BENNING
ST 710
graphic display
0.05 20

Scope of delivery BENNING ST 710

indication= ID

IPE

ID = IPE + IL

IL Leakage current e.g. via

the water conduits and
capacity of the washing
machine to earth

ST 710
050309: with socket of type E (B/F/CZ/SK/PL)
050315: with socket of type CH (CH)

(test sample under

operating conditions)

Differential current measurement method with BENNING CM 9

indication
protective conductor resistance
insulation resistance
0.1 M 20 M
(500 V DC)
protective conductor current/
contact current by means of
0.1 mA 20 mA
alternative leakage current
measurement method
line test
RPE, RISO, shortcircuit test and continuity test of
phase conductor (L) and neutral conductor (N)
voltage
50 V 270 V
scope of delivery
carrying case, test cable with alligator
clip, appliance cable, battery set
item no.
050308

Optional accessories for

BENNING ST 710/ST 720/ST 750 A
test badges next test (300 pieces)
item no. 756212
measuring adapters for three-phase loads (passive)
(see page 9)
item no. 044122/044123
leakage Current Clamp BENNING CM 9 for the measurement of
differential current, protective conductor current and load current of
single-phase and three-phase loads
(see page 7)
item no. 044065
measuring adapters for leakage current clamp BENNING CM 9
single-phase, conductors led through individually and with double insulation
shock-proof socket/shock-proof plug
item no. 044131
three-phase, conductors led through individually and with double insulation
16 A CEE coupling-CEE plug, 5pin
item no. 044127
32 A CEE coupling-CEE plug, 5pin
item no. 044128
See page 18 + 19 for further accessories

BENNING World Class Test Equipment

BENNING ST 720 Appliance Tester (VDE 0701-0702)

testing of electrical appliances under operating conditions
BENNING ST 720
Mains-operated and battery-operated Appliance
Tester for mobile testing of electrical devices
testing in compliance with DIN VDE 0701-0702 (EN 62638),
BGV A3, BetrSichV (German Health and Safety at Work Regulations), VE/NORM E 8701, NEN 3140
quick testing within a few seconds
all-in-one appliance tester and RCD tester in one single device
unique testing of single-phase and three-phase devices
under operating conditions

Application
Testing of devices with mains voltage-dependent switching elements/mains-supply units/relays such as controlled devices/tools, devices of information and communication technology as well as of devices which can be tested
completely with mains voltage only.
In mains operating mode, the protective conductor
current/contact current is measured by means of the required
differential current/direct measurement method.

Features BENNING ST 720

mains operating mode for tests under operating conditions
battery operating mode for mobile testing
automatic testing procedure for devices of class I (key 1),
class II/III (key 2) and line test (key 1)
reduction of the ISO testing voltage to 250 V/ 500 V for
devices with overvoltage arresters/electronic devices
testing of RCDs with 30 mA
measuring result with pass/fail information
limiting values preset in compliance with DIN VDE standard
indication of correct function key in case of incorrect operation, overload and if the test sample is not switched on
sufficient battery capacity (6 x 1.5 V, mignon, AA, IEC LR6)
for > 2500 test samples

BENNING ST 720
Mains-operated and battery-operated Appliance Tester
BENNING
ST 720
graphic display
0.05 20

indication
protective conductor resistance
insulation resistance
0.1 M 20 M
(250 V/500 V DC)
protective conductor current/
contact current by means of
- differential current
0.25 mA 20 mA
measurement method
- alternative leakage current
0.25 mA 20 mA
measurement method
- direct measurement method
0.1 mA 2 mA
line test
RPE, RISO, short-circuit test and continuity test of
phase conductor (L) and neutral conductor (N)
testing current of RCD
30 mA
tripping time
10 ms 500 ms
protective conductor current of
three-phase test objects under
0.25 mA 10 mA
operating conditions (optional)
voltage
50 V 270 V
scope of delivery
carrying case, test cable with
alligator clip, mains connection cable,
appliance cable, battery set
item no.
050312

Measuring functions
protective conductor resistance with a testing current of
200 mA DC and automatic polarity reversal
insulating resistance with a testing voltage of 250 V/500 V DC
mains operating mode: protective conductor current/contact
current by means of differential current/direct measurement
method with automatic mains pole reversal
battery operating mode: protective conductor current/contact current by means of alternative leakage current measurement method
tripping time measurement of RCDs with 30 mA
voltage measurement on external shock-proof socket
(L-N, L-PE, N-PE)
active testing of three-phase devices under operating conditions by means of optional measuring adapters (item no.
044140/044141)

nt
ntial curreethod
en t m
measurem CDs with 30 mA
R
of
se loads
testing
f three-pha 50 V
o
g
n
ti
s
te
e
2
activ
ge of
sting volta
ISO te
differe

16 A/32 A CEE 5-pin, active,

for ST 720

16 A/32 A CEE coupling, 5-pin onto shock-proof

plug (passive) for ST 710/ST 720/ST 750 A

16 A/32 A CEE coupling, 3-pin onto shock-proof

plug for ST 710/ST 720/ST 750 A

Shock-proof 4 mm plug for

devices without shock-proof
plug for ST 710/ST 720
ST 720
050313: with socket of type E (B/F/CZ/SK/PL)

Optional accessories for

BENNING ST 720
measuring adapters for three-phase loads (active)
for measuring RPE, and IPE under operating conditions
16 A CEE 5-pin active
item no. 044140
32 A CEE 5-pin active
item no. 044141

BENNING ST 710/ST 720/ST 750 A

measuring adapters for three-phase loads (passive)
for measurement of RPE, RISO and IEA
16 A CEE coupling, 5-pin - shock-proof plug
item no. 044122
32 A CEE coupling, 5-pin - shock-proof plug
item no. 044123
measuring adapters for single-phase loads
for measurement of RPE, RISO and IEA
16 A CEE coupling, 3-pin - shock-proof plug
item no. 044143
32 A CEE coupling, 3-pin - shock-proof plug
item no. 044144
shock-proof 4 mm plug for devices without
shock-proof plug
item no. 044142
See page 18 + 19 for further accessories

Scope of delivery BENNING ST 720

BENNING World Class Test Equipment

10

BENNING ST 750 A Appliance Tester (VDE 0701-0702, VDE 0751)

testing of electrical appliances and medical electrical devices
AddIn for Mebedo
test software
ELEKTROmanager
and fundamed

BENNING ST 750 A
Appliance Tester for testing electrical appliances
and medical electrical devices
testing according to
- DIN VDE 0701-0702 (EN 62638): testing of electrical appliances/equipment
- DIN VDE 0751-1 (EN 62353): testing of medical electrical
devices, such as hospital bed
- German Health and Safety at Work Regulation
innovative - indication and operation via colour LCD touchscreen
powerful - 2 GB memory card for more than 100000 tests
all in one - one appliance tester for all VDE tests

ted
-operain case
y
r
e
t
t
Ba terface
ge
user in tation chan
s
e
r
of test power failu
and

Features
automatic and auto-configurable testing procedures
complete test sample/customer database can be stored on SD
card and thus is directly available at the place of inspection
management of large test sample inventories with more
than 100000 storable device tests per 2 GB SD card
direct entry via touchscreen and external keyboard/mouse
measuring result with pass/fail indication and acoustic
warning signal, if the test has been failed
help function and schematic connecting diagrams
separate 4 mm test sockets and IEC connector
3 x USB interface for PC, external keyboard and RFID reader/writer
1 x RS 232 interface for barcode scanner, printer and SD card slot
free firmware update possible via SD card/USB stick

ST 750 A

Measuring functions

TRUE RMS

protective conductor resistance with 200 mA DC and a testing

current of 10 A AC
insulating resistance with a testing voltage of 50 V to 500 V (adjustable)
protective conductor current/contact current via differential
current measurement method, alternative leakage current
measurement method or direct measurement
functional test with indication of leakage current, mains voltage,
load current, effective power, apparent power and measuring time
testing of device connecting cables and extension cables
testing of three-phase loads by means of optional measuring adapters
additionally for VDE 0751-1: device leakage current, leakage
current of application part type B, type BF and type CF

BENNING ST 750 A
Appliance Tester (VDE 0701-0702, VDE 0751)
BENNING
ST 750 A
5.7 colour LCD touchscreen, VGA
1 m 20
0.1 M 100 M

Leakage
CM 9
Active testing of
three-phase loads by
means of test procedures
with BENNING CM 9
differential current clamp
and measuring adapter

044127/044128

display
protective conductor resistance
insulation resistance
protective conductor current/
contact current via differential
current measurement method,
0.05 mA 25 mA
alternative leakage current
measurement method or
direct measurement
device leakage current and
leakage current of the applied part
0.05 mA 25 mA
for medical electrical devices
line test
RPE, RISO, IPE, short-circuit test and continuity test
of phase conductor (L) and neutral conductor (N)
voltage/current
1 V - 360 V/0.1 A - 16 A
effective power/apparent power
20 W - 4000 W
interface
3 x USB, 1 x RS 232
dimensions/weight
405 x 330 x 165 mm/approx. 6 kg
scope of delivery
tester in waterproof (IP 67), break-proof case,
test cable with alligator clip, appliance
cable, input stylus, 2 GB SD card
item no.
050310

by
a t ion
A p plic s cr e e n!
touch
Touchscreen

Order recommendation
appliance tester BENNING ST 750 A
software BENNING PC-Win ST 750
barcode scanner
barcode labels (1000 pieces)
test badges next test
(300 pieces) (see page 8)

item no. 050320

item no. 047001
item no. 009369
item no. 756301
item no. 756212

Optional accessories for BENNING ST 750 A

measuring adapters for three-phase loads (passive)
for measurement of RPE, RISO and IEA
16 A CEE coupling, 5-pin - shock-proof plug
item no. 044122
32 A CEE coupling, 5-pin - shock-proof plug
item no. 044123
Leakage Current Clamp BENNING CM 9 for measurement of differential current, protective conductor current, load current of loads
(see pages 7/8)
item no. 044065
measuring adapters for leakage current clamp BENNING CM 9
single-phase, conductors led through individually and with double insulation
shock-proof socket/shock-proof plug
item no. 044131
three-phase, conductors led through individually and with double insulation
16 A CEE-CEE, 5-pin
item no. 044127
32 A CEE-CEE, 5-pin
item no. 044128
See pages 18 and 19 for further accessories

BENNING World Class Test Equipment

11

BENNING PC-Win ST 750 documentation software

helpful accessories for efficient testing

Software PC-Win ST 750

Software
BENNING PC-Win ST 750

Portable log printer BENNING PT 1

with Bluetooth

professional PC software for the management and documentation of recorded measuring values
explicit database structure with customer, department, test
sample and test result including the test date
easily creating and copying customers and test samples
printing of the test results as single log and serial log
bidirectional data transmission PC BENNING ST 750 A
import and export function of existing test sample and customer databases via MS Excel
free software update to the latest version available per
download

the perfect solution for printing test records rapidly on site

high printing speed due to direct thermal printing process
data transmission via Bluetooth or RS232 interface
power supply by means of rechargeable NiMH battery pack
width/length of thermographic paper rolls: 58 mm/13 m
included in delivery: 6 V battery pack, mains supply BENNING PT 1 printer
unit, belt clip, wall fastening, Bluetooth dongle for
BENNING ST 750, 2 rolls of thermographic paper and
RS232 cable

Roll of thermographic
paper

Barcode label

Test sample identification via

barcode scanner/labels

Compact
industrial keyboard

particularly suited for repetitive testing and identification of

large test sample inventories in offices, administrations etc.
highly adhesive PVC barcode labels with barcode and consecutive numbering (reels of 1000 pieces)
barcode scanner with RS 232 interface supports all
conventional barcodes such as UPC/EAN/JAN, Code 39,
Code 128 etc.

high-quality functional keyboard with integrated trackball

for comfortable input of test sample/customer data on site
compact keyboard dimensions for
safe transport in the BENNING
ST 750 A appliance tester
data transmission via Bluetooth or
USB interface
increased protection against dust
and splash water
industrial keyboard

Barcode scanner

Test sample identification via

RFID reader/writer or transponder
test sample identification via radio frequency (Radio Frequency
Identification) without visual contact or direct contact of the
transponder
RFID technology stores the test sample data/measuring values
directly onto a memory chip (transponder) on the test sample
particularly suited for rough industrial environments
tag-type transponder for attachment by means of cable ties
ring clip transponder for attachment to the mains supply line
epoxy resin transponder (self-adhesive) for attachment into
the housing or onto the surface of the housing
transponder frequency: HF 13.56 MHz; memory depth:10 kbit

Tag-type
transponder

Ring clip
transponder

Self-adhesive epoxy
resin transponder
RFID reader/writer

Optional accessories for BENNING ST 750 A

software BENNING PC-Win ST 750
on CD-ROM incl. USB cable
item no. 047001
barcode scanner
with RS 232 interface
item no. 009369
barcode labels with consecutive numeric representation
(1000 pieces)
item no. 756301
printer BENNING PT 1
with Bluetooth and RS 232 interface
item no. 044150
roll of thermographic paper
(20 pieces)
item no. 044151
See pages 18 and 19 for further accessories

industrial keyboard
with USB interface
item no. 044154
RFID reader/writer
with USB interface
item no. 009370
RFID transponder, tag-type, height/width: 43 x 34 mm
(100 pieces)
item no. 044139
RFID transponder, ring clip, inside diameter: 7.5 mm
(100 pieces)
item no. 044138
RFID transponder, self-adhesive, diameter/height: 17 mm/2.5 mm
(100 pieces)
item no. 044137

BENNING World Class Test Equipment

12

Safety Instruments BENNING IT 101, IT 110 and IT 120 B

testing of electrical systems in compliance with the standards
BENNING IT 101
Insulation and Resistance Measuring Device
measurement of insulating resistance and calculation of
the resulting leakage current
testing voltages of 50 V, 100 V, 250 V, 500 V and 1000 V
selectable limiting values for ISO measurement, green LED
for PASS, red LED for testing voltage/external voltage
resistance measurement with a testing current of 200 mA
for testing protective conductor connections
measurement of polarization index (PI) and dielectric
absorption rate (DAR)
switchable probe tip for triggering the measuring process
internal memory for 100 measuring values per measuring function
TRUE RMS voltage measurement with low-pass filter
including case, switchable probe tip, silicone measuring
leads, magnetic hook, alligator clips, rubber protective
frame and batteries

BENNING IT 110, BENNING IT 120 B

Installation Testers
For safety tests on electrical systems
according to DIN VDE 0100 and IEC 60364
Multifunctional installation testers for complete testing and
efficient troubleshooting of electrical systems
measurement of the protective conductor line and of the
equipotential bonding line with a testing current of 200 mA
measurement of the insulation resistance with testing voltages of 100 V, 250 V, 500 V and 1000 V
line impedance and loop impedance measurement (optional
without tripping of the RCD) with calculation of the shortcircuit current (PFC/PSC)
complete testing of RCDs with nominal fault currents of
10/30/100/300/500/1000 mA
measurement of contact voltage (without tripping), tripping
time and tripping current (ramp test) of residual current
operated device (RCD)
phase-sequence testing in three-phase mains
voltage measurement up to 500 V and online voltage monitoring

IT 110

BENNING IT 110
Installation Tester

CAT IV 600 V
TRUE RMS
IT 101

BENNING TA 5

BENNING IT 101
Insulation and Resistance Measuring Device

Scope of delivery BENNING IT 101

BENNING
IT 101
indicating range
4000 digits (illumination)
low-impedance resistance
0.01 40
insulation resistance
1 k 20 G
resistance
0.01 40 k
voltage
0.1 V 600 V AC/DC TRUE RMS
supplementary function
leakage current, polarization index (PI),
dielectric absorption rate (DAR), automatic
discharge function, null balance of the
measuring leads
measured value memory
500 measuring results
measuring category
CAT IV 600 V
item no.
044033

display
low-impedance resistance
insulation resistance
line impedance (L-N/L)
loop impedance (L-PE)
short-circuit current
RCD testing
type AC, A
phase sequence
voltage, frequency
item no.

BENNING
IT 110
graphic display (illuminated)
0.01 2000
1 k 1000 M
0.01 2000
0.01 2000
0.01 A 24.4 kA
tripping time, tripping current,
contact voltage
yes
1 V 500 V, 45 Hz 65 Hz
044100

Optional accessories for

BENNING IT 101/IT 110/IT 120 B
40 m measurement cable BENNING TA 5 with practical winder, strap,
for the measurement of protective and bonding conductors,
connection: 4 mm safety test
item no. 044039

BENNING World Class Test Equipment

13

BENNING IT 110, IT 120 B Installation Testers

the perfect solution for efficient testing
Features
BENNING IT 110, BENNING IT 120 B

Logging software with Test Log according to ZVEH

BENNING PC-Win IT 120 B

all measuring functions can be selected directly by means

of a rotary switch
switchable probe tip for releasing the measuring process
graphic display and help function with connecting diagram
complete measuring result with measuring parameters,
limiting value and symbols for PASS/FAIL
current supply by means of 6 NiMH storage batteries (AA)
with charger

PC software for reading the stored test data

creation of test logs with handover and status report
according to ZVEH
structuring and export function of the test data

Additional functions
BENNING IT 120 B
in addition to the BENNING IT 110 :
testing of universal current-sensitive RCDs of type B
current measurement (TRUE RMS) by means of current
clamp adapter (optional)
illumination measurement by means of lux sensor (optional)
earthing measurement by means of three-wire measuring
method (optionally with earthing set)
integrated measured value memory for 500 measurements
USB and RS 232 interface
BENNING PC-Win IT 120 B software included in delivery

Test log to
g
accordin
ZVEH

Scope of delivery of the BENNING IT 120 B

AddIn for Mebedo

test software
ELEKTROmanager
and fundamed

INFORMATION:

rsal
of unive
Testing ensitive
s
current- type B
f
o
s
D
RC

IT 120 B

BENNING IT 120 B
Installation Testers
BENNING
IT 120 B
display
graphic display (illuminated)
low-impedance resistance
0.01 2000
insulation resistance
1 k 1000 M
line impedance (L-N/L)
0.01 2000
loop impedance (L-PE)
0.01 2000
short-circuit current
0.01 A 24.4 kA
RCD testing
tripping time, tripping current,
type AC, A, B
contact voltage
phase sequence
yes
voltage, frequency
1 V 500 V, 45 Hz 65 Hz
earth resistance
0.01 2000
current (TRUE RMS)
0.1 mA 20 A (by means of the clamp)
luminous intensity
0.01 lux 20 klux (by means of sensor)
measured value memory
500 measuring results
interfaces
USB, RS 232
incl. software
BENNING PC-Win IT 120 B
item no.
044102

RCDs of type B are increasingly used for multi-phase

equipment of power electronics. In case of a fault,
these devices also detect
smooth DC fault currents
and high-frequency AC fault
currents.

BENNING CC 2

Scope of delivery of the installation testers

tester incl. carrying case / carrying strap

switchable probe tip
test cable with shock-proof plug
universal test cable, 3 x L = 1.5 m
3 x test probe, 3 x crocodile clips
charger with 6 NiMH storage batteries (AA)
PC software BENNING PC-Win IT 120 B
USB and RS 232 cable

BENNING
IT 110
x
x
x
x
x
x

BENNING
IT 120 B
x
x
x
x
x
x
x
x

BENNING luxmeter
type B

Optional accessories for BENNING IT 120 B

current clamp adapter BENNING CC 2
0.5 A 20 A AC (200 A AC)
item no. 044110
illumination sensor BENNING luxmeter type B
Accuracy: 5 %
item no. 044111
earthing set consisting of 2 earth rods and 3 test cables
(2 x L = 20 m, 1 x L = 4.5 m)
item no. 044113

Earthing set

BENNING World Class Test Equipment

14

BENNNG PV 1-1 installation tester for photovoltaic systems

Commissioning tests and periodic inspection of PV systems
BENNING PV 1-1
PV installation tester for testing
grid-connected PV systems
tests in compliance with VDE 0126-23 (DIN EN 62446)
standard
easy operation by means of keys with AUTO test procedure
quick testing within a few seconds only
safe contacting by means of PV connectors

Measured values transmitted

via wireless connection

Application
For commissioning tests and periodic inspection of grid-connected PV systems according to VDE 0126-23. Meets all
requirements necessary for system documentation of the
DC side. Ideal for troubleshooting, maintenance work and
performance evaluation of PV systems.

Features of the BENNING PV 1-1

easy and safe operation by means of keys
automatic test procedure for polarity, open-circuit voltage,
short-circuit current and insulating resistance
RISO measurement with PASS/FAIL indication
memory of measured values for 200 PV strings
integrated real-time clock with date/time stamp for each
measurement
USB interface and download software for the preparation of
test certificates in MS Excel
safe contacting even during energy supply of the PV system
direct connection by means of MC4 and Sunclix connectors

Measuring functions
continuity test of the protective conductor and of the
equipotential bonding conductor with a testing current of
200 mA
polarity test of the DC current cables
open-circuit voltage for each PV string of up to 1000 VDC
short-circuit current for each PV string of up to 15 ADC
insulating resistance with a testing voltage of 250 V, 500 V
and 1000 VDC
DC string current and AC current by means of BENNING CC 3
current measuring clamp up to 40 A AC/DC (optional)

Radio interface Wireless SUN Link

wireless connection to the insolation and temperature
measurement instrument BENNING SUN 2 (optional)
direct display of the insolation value in W/m2
storage of the electric quantities to be measured considering the insolation and the module/ambient temperature in
real time

BENNING PV 1-1
Installation tester for photovoltaic systems

display
protective conductor
resistance
insulating resistance
open-circuit voltage
with polarity
short-circuit current
DC string current/
AC current
insolation

BENNING PV 1-1
scope of delivery

BENNING
PV 1-1
graphic display (illuminated)
0.05 199
0.2 M 199 M

BENNING CC 3

BENNING TA 5

5 V to 1000 V DC

0.5 A to 15 A DC
0.2 A to 40 A DC/AC
(by means of BENNING CC 3)
100 to 1250 W/m2
(by means of BENNING SUN 2)
PV module/ambient
-30 C to +125 C
temperature
(by means of BENNING SUN 2)
voltage via 4 mm sockets
30 to 440 V AC/DC
Interface/radio interface
1 x USB/433 MHz signal
dimensions/weight
270 x 115 x 55 mm/2.6 kg
scope of delivery
carrying case, measuring lines,
alligator clips, MC4 and Sunclix
PV measuring lines, batteries, USB cable,
download software on CD-ROM
item no.
050421

Optional accessories for

BENNING PV 1-1
Current clamp adapter BENNING CC 3 for AC/DC current measurement
0.2 to 300 A AC/DC
item no. 044038
Measuring line BENNING TA 5 for protective conductor measurement
Line length: 40 m
item no. 044039

BENNING World Class Test Equipment

15

Insolation and temperature measuring instrument BENNING SUN 2

with digital compass and inclinometer
BENNING SUN 2
Insolation and temperature measuring instrument
for PV systems and solar thermal systems
Ideal for the planning, commissioning tests and periodic
inspection of grid-connected PV systems according to
VDE 0126-23 as well as for testing solar thermal systems.

Measuring functions
insolation measurement in W/m2 or BTU/h/ft2
dual-channel temperature sensor for measuring the module
temperature and the ambient temperature
digital compass for determining the cardinal direction
inclinometer for determining the module/roof pitch

Features of the BENNING SUN 2

universal 4-in-1 measuring instrument for all testing and
maintenance work as well as for economic efficiency analysis
temperature-compensated PV reference cell for precise insolation measurement
precise temperature measurement by means of high-precision sensors
data logger for 5000 data records, including insolation and
module/ambient temperature
integrated real-time clock with date/time stamp
USB interface and download software for the preparation of
test certificates in MS Excel
data logger with energy-saving stand-by mode
shock-absorbing protective rubber holster

Radio interface Wireless SUN Link

wireless transmission of insolation, module temperature
and ambient temperature including date/time stamp to the
BENNING PV 1-1

Insolation, angle of inclination

and compass bearing

Wireless transmission of measuring data

(alternatively import of measuring data by means of date/time stamp)

BENNING SUN 2
Insolation and temperature measuring instrument

display
insolation
PV module/ambient
temperature
compass bearing
(orientation)
angle of inclination
measurement
real-time clock
measured value memory
interface/radio range
dimensions/weight
scope of delivery

item no.

BENNING
SUN 2
graphic display
100 to 1250 W/m2

Insolation, PV module/ambient temperature

s
ort form
Test rep of PV systems
ation
Examin ee under
fr
[Link]
[Link]

-30 C to +125 C
0 to 360
0 to 80
date/time stamp
5000 data records for insolation
and temperature
1 x USB/approx. 30 m for unobstructed
view conditions
150 x 80 x 33 mm/350 g
case, protective rubber holster,
module/ambient temperature sensor,
battery set, USB cable,
download software on CD-ROM
050420

BENNING SUN 2
scope of delivery

BENNING World Class Test Equipment

16

Demonstration case for practice-oriented application

of testers, measuring instruments and safety instruments

tion
r informa
For furthe r website
visit ou
[Link]

[Link]

BENNING DB 1
Demonstration case for testing and measuring
primary quantities of electrical engineering

BENNING DB 2
Demonstration case for practice-oriented application
and training concerning VDE 0100 installation testers

particularly suited for teaching and

education purposes, training courses
and product presentations

portable case for simulation of electrical

systems conforming to standards
according to DIN VDE 0100/105

Demonstration case

Demonstration case
BENNING DB 1
230 V, 50/60 Hz mains connection
405 x 330 x 160 mm, approx. 6 kg
case with mains connection cable
044132

power supply
dimensions/weight
scope of delivery
item no.

BENNING DB 2
230 V, 50/60 Hz mains connection
450 x 330 x 110 mm, approx. 4.5 kg
case with mains connection cable
044133

power supply
dimensions/weight
scope of delivery
item no.

Recommendation for the workshop equipment for enterprises of electrical engineer-craft

according ZVEH and VDEW guidelines (Electricity Association)
Required test and
measurement
Two-pole voltage tester
Voltage (min. 600 V) and
current meter (min. 15 A)
Clip-on ammeter
(min. 300 A)
Insulation tester
Loop ohmmeter
Ohmmeter
FI/RCD-meter
Phase sequence indicator

Tester/meter
complying with standard
DIN VDE 0682-401
IEC/EN 61243-3
DIN VDE 0411-1
IEC/EN 61010-1
DIN VDE 0411-1
IEC/EN 61010-1
DIN VDE 0413-2
IEC/EN 61557-2
DIN VDE 0413-3
IEC/EN 61557-3
DIN VDE 0413-3
IEC/EN 61557-4
DIN VDE 0413-6
IEC/EN 61557-6
DIN VDE 0413-7
IEC/EN 61557-7

Single unit
version I
DUSPOL analog
item no. 050261
MM 2
item no. 044028
CM 2
item no. 044035
IT 101
item no. 044033

DIN VDE 0404-1

DIN VDE 0404-2

Instrument for testing

electrical equipment
(DIN VDE 0701-0702, 0751-1)
Additional recommendation ZVEH
Grounding gauge
Continuity tester
Light meter lux meter

DIN VDE 0413-6

IEC/EN 61557-6
DIN VDE 0413-7
IEC/EN 61557-7

Additional recommendation of BENNING

Differential current clamp for
DIN VDE 0411-1
error current determination in
IEC/EN 61010-1
electric equipment and systems
DIN VDE 0404-4

Single unit/device combination Single unit/device combination

version II
version III
DUSPOL expert
DUSPOL digital
item no. 050262
item no. 050263
MM 1-3 + CC 1
MM 7-1 + CC 1
item no. 044084 + 044037
item no. 044085 + 044037
CM 5-1
CM 8
item no. 044066
item no. 044064

IT 101
item no. 044033

IT 110
item no. 044100

IT 120 B
item no. 044102

ST 710
item no. 050308

ST 720
item no. 050312

ST 750 A
item no. 050320

Earthing set for IT 120 B

item no. 044113

TRITEST
item no. 020050

DUTEST
item no. 050155

Luxmeter type B for IT 120 B

item no. 044111

CM 9
item no. 044065

CM 9
item no. 044065

CM 9
item no. 044065

BENNING World Class Test Equipment

Voltage and Continuity Tester

17

Phase-Sequence Indicator

PROFIPOL
Voltage Testers for universal applications

DUTEST
Continuity and line tester

indicating DC and AC voltage within the

range of 6 400 V
indicating steps 6, 12, 50, 120, 230, 400 V
polarity test for DC voltage
shock-proof housing made of rugged highpressure PE material
compact dimensions and increased grip
dustproof and waterproof, protection
category IP 65

reliable detection of faulty wiring, contact-

ing errors and cable interruptions

quick localization of defective fuses, lamps,

lines and short-circuits

indication of high-impedance (0 90 k)
and low-impedance (0 900 ) resistances
acoustic indication by means of loud testing
buzzer
visual indication by means of high-contrast
light-emitting diodes (LED)
powerful torch function
protected against external voltages of up to 400 V

TRITEST control
Phase-sequence indicator for testing
the phase sequence in three-phase
mains
indication of clockwise and anti-clockwise
phase sequence
indication of phase voltages (L1, L2, L3) by
means of high-contrast LEDs
voltage range: 400 690 V (50 60 Hz)
bright LED pocket lamp function
including safety probe tips and alligator clip

PROFIPOL

DUTEST

TRITEST control

item no. 020022

item no. 050155

item no. 020050

TRITEST easy
Non-contact phase/phase sequence
tester
phase sequence testing in three-phase
mains
phase testing on sockets and distribution
boxes
testing with regard to phase balance
testing insulated lines (cable reel, chains of
lights) of cable breaks
indication via red/green probe tip and
buzzer
ON/OFF push-button with automatic
switch-off
voltage range: 200 V 1000 V AC
break-proof ABS housing and easy operation
incl. Batteries and pen clip

Phase sequence testing

green = clockwise

CAT IV 600 V
TRITEST easy

item no. 020051

Testing of cable breaks

BENNING World Class Test Equipment

18

Accessories for BENNING testers and measuring instruments

safe functional indispensable
Hard-top case for testers and measuring instruments
item no. 711020

DUSPOL stand-by case

High-quality hard-top case with foam insert and three compartments for professional storage of testers and measuring
instruments.
Compartment dimensions: approx. 110 x 300 x 50 mm,
Case dimensions: approx. 450 x 380 x 110 mm

Practical stand-by case with Velcro fastener and belt loop

made of hard-wearing nylon fabric suitable for DUSPOL
digital, DUSPOL expert and DUSPOL analog.
Dimensions: 330 x 100 x 60 mm

item no. 010911

BENNING TA 1
item no. 044124
4 mm safety crocodile clips, two pieces, red/black,
professional equipment, CAT III 1000 V

BENNING TA 2
item no. 044125
set of 4 mm safety measuring leads, six pieces,
red/black, professional equipment, consisting of:
safety measuring leads (silicone), CAT III 1000 V
safety test probes (4 mm measuring tip), CAT II 1000 V
safety crocodile clips, CAT III 1000 V

BENNING TA 3
item no. 044126
set of 4 mm safety measuring leads, eight pieces,
red/black, professional equipment, CAT III 1000 V,
consisting of:
safety measuring leads (silicone)
safety test probes (slender measuring tip)
safety claw clamps
safety crocodile clips

BENNING TA 4
item no. 044120
magnetic holder for Multimeter and
BENNING IT 101, 3 pieces, consisting of:
magnetic holder
adapter and belt, for attachment of
BENNING Multimeters to switching
cabinets, machine and system parts

4 mm safety measuring leads

with 2 mm measuring tip

item no. 044146

4 mm safety measuring leads 2 pieces,

red/black, L = 1.40 m, with 2 mm
measuring tip CAT IV 600 V/
CAT III 1000 V (with protective caps),
CAT II 1000 V (without protective caps)

4 mm safety measuring leads

with 4 mm measuring tip
BENNING TA 5
item no. 044039
40 m measurement cable with practical winder, strap, for the
measurement of protective and bonding conductors,
Connection: 4 mm safety test

item no. 044145

4 mm safety measuring leads 2 pieces,

red/black, L = 1.40 m, with 4 mm
measuring tip CAT IV 600 V/
CAT III 1000 V (with protective caps),
CAT II 1000 V (without protective caps)

Set of safety measuring leads for BENNING MM 4

item no. 044119

Temperature probe (type K)

set of 4 mm safety measuring leads, 3 pieces,

consisting of:
safety measuring leads with 2 mm measuring tip
2 measuring probes with 2 mm measuring tip

insertion probe (V4A steel tube) for flexible substances,

liquids, gases and air, measuring range:
-196 C to +800 C, suitable for BENNING MM 1-3, MM 7-1,
MM 11 and CM 8 digital measuring instruments

item no. 044121

BENNING World Class Test Equipment

19

Measuring adapters for BENNING ST 710/ST 720/ST 750 A

appliance testers and BENNING CM 9 leakage current clamp
Measuring adapters for BENNING ST 710/ST 720/ST 750 A

Measuring adapters for single-phase loads (passive)

for measuring RPE, RISO and IEA, CEE coupling (3-pin) with
shock-proof plug
16 A CEE (3-pin)
item no. 044143
32 A CEE (3-pin)
item no. 044144

for ST 710/720/750 A

Measuring adapters for three-phase loads (passive)

for measuring RPE, RISO and IEA, CEE coupling (5-pin) with
shock-proof plug
16 A CEE (5-pin)
item no. 044122
32 A CEE (5-pin)
item no. 044123

for ST 710/720/750 A

Measuring adapter for single-phase and three-phase

loads (passive)
for measuring RPE, RISO and IEA, triple CEE coupling with
shock-proof plug
Triple CEE coupling: 16 A CEE (5-pin), 32 A CEE (5-pin),
16 A CEE (3-pin)
item no. 044147
for ST 710/720/750 A

Measuring adapter for BENNING ST 710/ST 720

Shock-proof plug with 4 mm plug for appliances without
shock-proof plug
item no. 044142

for ST 710/720

Measuring adapters for BENNING ST 720 (active)

Measuring adapters for three-phase loads for measuring
RPE and IPE (direct measurement method) by means of current
transformer, CEE (5-pin) with shock-proof plug
16 A CEE (5-pin)
item no. 044140
32 A CEE (5-pin)
item no. 044141
for ST 720

Measuring adapters for BENNING CM 9 leakage current

clamp (active)
for measuring the differential/protective conductor/load current,
conductors led through individually, with double insulation
Single-phase,
shock-proof plug/coupling

item no. 044131

Three-phase,
16 A CEE (5-pin)
32 A CEE (5-pin)

item no. 044127

item no. 044128

for CM 9

for CM 9

(test sample working)

BENNING CM 9 leakage current clamp

for measuring the differential/protective conductor/load current
of single-phase and three-phase loads (1 A to 100 A AC)
(see page 7)
item no. 044065

TRUE RMS

indication= ID

ID = IPE + IL

IPE
IL Leakage current e.g. via
the water conduit and
capacity of the washing
machine to earth

BENNING World Class Test Equipment

20

Professional VDE seminars

Service hotline with 24h service
VDE 0701-0702 seminar
Testing of electrical appliances/equipment

VDE 0100 seminar

Testing of electrical installations of up to 1000 V

Features:
The seminar addresses qualified electricians, competent
persons as well as electrotechnically trained persons who have
to do the testing and its documentation according to the DIN
VDE 0701-0702 standard for repaired or modified electrical
devices or the repetitive testing of electrical devices.
The participants of the seminar will be given an intensive
training in order to be able to do this inspection according to
regulations considering the optimum use of the BENNING
ST 710/ST 720/ST 750 A testers as well as of the BENNING
PC-Win ST 750 logging software. At the end of the seminar,
the participants will get a certificate of attendance.

Features:
The seminar addresses qualified electricians who have to do
the testing and its documentation of electrical installations of
up to 1000 V according to the DIN VDE 0100 standard.
The participants of the seminar will be given an intensive
training in order to be able to do this inspection independently
and according to regulations considering the optimum use of
the BENNING IT 101/IT 110/IT 120 B testers as well as of the
BENNING PC-Win IT 120 B logging software. At the end of the
seminar, the participants will get a certificate of attendance.

free
e
2 4 h s e r v ic
ne:
Service Hotli - 555

/93
+49 (0) 28 71

Testing, measuring and safety instruments

The whole range of testers from one supplier

Factory II, Robert-Bosch-Strae 20, D-46397 Bocholt

Your distributor:

Developing safe and practical testing and measuring instruments which comply with the relevant standards is an
integral part of BENNINGs product philosophy for more than
65 years now. Today, BENNING offers a comprehensive product range of high-quality testing, measuring and safety
devices the quality requirements of which are orientated
according to the demands of professional users. With the
generation of DUSPOL voltage testers and with the measuring and safety devices, BENNING sets pioneer standards
worldwide concerning safety, functionality and design.

BENNING Elektrotechnik und Elektronik GmbH & [Link]

Mnsterstrae 135-137 D-46397 Bocholt
Tel.: + 49 / (0) 2871 / 93-420 Fax: + 49 / (0) 2871 / 93-429
[Link] E-Mail: duspol@[Link]

784331.32 GB 01/2014 paus Design & Medien, Bocholt Subject to technical changes.

Content:
Regulations, testing of the AC side, testing of the DC side (polarity test, open-circuit voltage, short-circuit current, insulating
resistance and operating current measurement for each PV
string of the PV generator) as well as minimum requirements
for system documentation in compliance with VDE 0126-23.

Printed on non-chlorine bleached paper.

Content:
Regulations, definitions, measurements (insulation, continuity
Content:
of the protective conductor, loop impedance/line impedance,
Regulations, definitions, measurements (continuity of the pro- short-circuit current, FI/RCD testing, earthing, rotary field,
tective conductor, insulation, protective conductor current/con- voltage, frequency), management of measuring data and docutact current), test sample management and documentation mentation according to ZVEH.
according to ZVEH.
Seminar venue:
BENNING GmbH & Co. KG,
VDE 0126-23 seminar
Robert-Bosch-Strae 20, 46397 Bocholt
Testing of grid-connected photovoltaic systems
Seminar dates:
to be agreed upon
Features:
Seminar fee:
We are happy to make you an offer:
phone +49 (0) 28 71/93 - 470
The seminar is intended for qualified electricians who have to
4 or 6.5 hours
carry out commissioning tests and periodic inspection of grid- Duration:
connected photovoltaic systems in compliance with the Scope of services: Intensive training in small groups of up
to 6 persons, training material, certifiVDE 0126-23 standard. The participants of the seminar will be
cate of attendance and refreshments
given an intensive training in order to be able to do this inspecduring the seminar
tion according to regulations considering the optimum use of
the photovoltaic tester BENNING PV 1-1 as well as of the inso- We are pleased to send you our directions and to recommend to
lation and temperature measuring instrument BENNING SUN 2. you hotels in direct vicinity of the seminar venue.