Scribd
Upload
563 views2 pages

Job Hazard Analysis: Task/Procedure Hazard Safe Procedure

This job hazard analysis document summarizes the hazards associated with using extension ladders and provides safety procedures to address those hazards. It identifies that falls from ladders and contact with overhead electrical wires are two major concerns. The document outlines that extension ladders should be set up on a firm, level surface and extend at least 3 feet above the landing. It also provides safety procedures such as maintaining 3-point contact while climbing, not carrying tools or materials while climbing, and not overloading or using damaged ladders. Training is required before using ladders.

Uploaded by

Khairul Muzamil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
563 views2 pages

Job Hazard Analysis: Task/Procedure Hazard Safe Procedure

This job hazard analysis document summarizes the hazards associated with using extension ladders and provides safety procedures to address those hazards. It identifies that falls from ladders and contact with overhead electrical wires are two major concerns. The document outlines that extension ladders should be set up on a firm, level surface and extend at least 3 feet above the landing. It also provides safety procedures such as maintaining 3-point contact while climbing, not carrying tools or materials while climbing, and not overloading or using damaged ladders. Training is required before using ladders.

Uploaded by

Khairul Muzamil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
  • Job Hazard Analysis for Ladders: This section outlines the job hazard analysis for ladder safety, including types of hazards and safe procedures to mitigate risks.

Job Hazard Analysis

JOB TITLE: Ladder, Extension


ANALYSIS: 4/13/2012

DATE OF

JOB LOCATION: DMC/FSDA

SAFE PROCEDURE
TASK/PROCEDURE
Extension ladders are typically
used to access work or stored
items above our normal reach and
at points of access and egress to
upper levels. Extension ladders
often contribute to severe and
fatal injuries. Falls from ladders
and contact with live overhead
electrical wires and electrical
components are two major
concerns when working from
ladders.

HAZARD
Multiple, severe or fatal injury
resulting from falls.
Electrical shock, electrocution
from contact with live overhead
electrical wires and components
Unstable footing
Reaching out too far
Overloading
Use of damaged ladder
Unsafe use of ladder
Moving, carrying, and set-up

Training on safe ladder use is


required for anyone who uses a
ladder. Do not use a ladder if you
have not had adequate training.
Always ensure the ladder is set up
on a firm, stable, level surface.
Extend ladders a minimum of 3
feet above the landing when
using at a point of access and
egress to an upper level. Make
sure the ladder is secured at the
top and bottom.
Do not carry tools or material
while climbing. Use a rope and
bucket to hoist tools and
materials to upper levels.
Maintain a 3-point contact when
climbing; two feet, one hand; two
hands, one foot.
Do not overload the
manufacturers weight limit.
Do not use a ladder that is
damaged or does not have weight
limit decals.
Never modify or attempt to repair
a damaged ladder
Ladders should only be used for
their intended purpose.
Never lean out beyond the side
rails of the ladder.
Keep ladder clean and well
maintained.
Never use a single section of a
double section ladder.

JHA 1 3/12

You might also like