Tri Clover Centrifugal Pump

Mfg: Tri Clover

Stock No. OIP024.

Model: SP328ME-00B-S
Serial No. E3152

Tri Clover Centrifugal Pump.

Model SP328ME-00B-S.
S/N E3152.
3 in. Inlet, 2 in. Outlet,
7 in. Impeller with water flush double mechanical seals.
Ajax Motor, S/N: 60942554, 7.5 hp, 1,800 rpm, 220/460 V, 60 Hz, 20/10 amps, 3-phase.
Overall Dimension: 44 in. L x 19 in. W, x 16 in. H.

The Cleanest Design

C/SP Series Centrifugal Pump

PD 66367 US1 2001-10

Application
The Tri-Clover C series and SP series of centrifugal pumps
have been designed for a wide range of applications
where stainless steel product wetted components are
essential to maintain hygienic processing standards. The
C and SP pumps (finish option version: Sanitary) are
designed for CIP applications and are accepted as meeting
the 3A standards by the appropriate committees of the
International Association of Milk, Food and Environmental
Sanitarians, the US. Public Health Service and the Dairy
Industry Committee. For applications involving a product
containing a large volume of entrained vapor or where the
supply pump could run dry, a circular style of casing is
recommended. (Not available for size 4410).
Both the C and SP pumps are ideally suited to applications
in the pharmaceutical, biotechnology, fine chemical, food,
beverage and dairy processing industries, where full
cleanability and corrosion resistance are paramount.
Standard design
The C Series pump consists of a standard NEMA C-flange
motor, a cast iron adapter and stainless steel pump shaft,
casing, rotating impeller and backplate. A variety of shaft
seals (with and without flush) are available to meet specific
application needs. The standard design is based on a
volute style pump casing. The C Series centrifugal pump is
direct coupled to a C face motor.
The SP Series pump consists of a cast iron bearing frame
with a stainless steel pump shaft. The casing, impeller and
backplate are the same as the C Series pump. The pump
then mounts to a fabricated base with a drive motor.
Likewise a variety of shaft seals (with and without flush)
are available to meet specific application needs.
Materials
Fabricated Base (SP only)carbon steel
stainless steel
Bearing Frame (SP only)cast iron

standard
optional

(Adapter, Fabricated Base and Bearing Frame also

protected by FDA-compliant epoxy paint system)

Fig. 1. C Series (top) and SP Series (bottom) Centrifugal Pump

Pump Casing,
backplate, shaft and impeller: ............... stainless steel, 316 L

Materials (Continued)
Connections:
Tri-Clamp ............................... standard
Bevel seat .............................. option
NPT ........................................ option
Flanged .................................. option
Weld ....................................... option
Note!

Type DG - Clamped-In Seal/Seat This long lasting seal

assembly utilizes standard Type D rotating seal components,
plus choice of silicon carbide, tungsten carbide or ceramic
stationary clamped in seal seat. Designed for longer seal life
in applications like pure water or other applications with
abrasive or non-lubricating products. The stationary seat is
reversible, for quick change-over if one side is damaged.

Leg kits are available as a standard option.

Casing Drain Option

Standard:

90 outlet configuration
45 outlet configuration

standard
option

Drain connection comprising a ferrule welded to the low

point of the casing connected to an elbow with Tri-Clamp
connection capable of 360 rotation.
Available in 1/2, 3/4 and 1 size.

90 outlet

45 outlet

Finish
Industrial: ................................ glass bead ID & OD
Standard Sanitary: ................. 32 Ra ID & OD
Special: .................................. up to 10 Ra
Elastomers
Buna N: .................................. standard
EPDM: .................................... optional
Fluoroelastomer: .................... optional
PTFE: ...................................... contact pump applications

Technical Data
Motor
Standard supply for C series is NEMA C-face, totally enclosed, fan cooled, locked bearing, close-coupled motors.
Standard supply for SP series is NEMA, totally enclosed, fan
cooled. Options are available for drip-proof, explosion proof,
energy efficient and chemical enclosures.

Voltage and Frequency

3 phase
50 Hz, 220/380 VAC
60 Hz, 208-230/460 VAC
60 Hz, 575 VAC

1500/3000 RPM
1750/3500 RPM
1750/3500 RPM

Shaft Seal
Type D - External Balanced Seal Well-suited for multipurpose use, this seal is designed to give long service life. Seal
consists of a single mechanical seal, carbon rotary vs.
stainless steel backplate. Typical applications include: dairy
products, beverages and water-like products, etc. Also
applicable for CIP cleaning solutions and detergents.

Type E - Water Cooled Balanced Double Seal Seal

chamber can be pressurized to contain coolants or sealants
which can be piped directly to drain. Seal consists of a
double mechanical seal, carbon rotary vs. stainless steel
backplate and follower. Ideal for slurries, heavy duty vacuum
applications (to 28 Hg), tacky products at temperature up to
and exceeding 212 F.
Type F - External Balanced Seal with Water Cascade
External balanced seal with water cascading attachment.
Seal consists of a single mechanical seal with water flush,
carbon rotary vs. stainless steel backplate. Recommended
for pumping applications to 14 Hg (Seal is identical to type D,
but equipped with water cascade).
Type A - Packing Gland Seal (non sanitary, SP Series only)
Recommended for chemical processing applications or
nonabrasive and non-congealing products. Also available
with water flush (Type B). Seal consists of multiple layers of
Teflon packing contained in a stainless steel stuffing box. A
wide range of commercial packings are available.

45 Discharge
K4H
1/2
K6H
3/4
K8H
1

90 Discharge
C4H
1/2
C6H
3/4
C8H
1

45 Discharge
K4V
1/2
K6V
3/4
K8V
1

90 Discharge
C4V
1/2
C6V
3/4
C8V
1

C = 90 Discharge H=Horizontal V=Vertical

C Series Close-Coupled Centrifugal Pump

Dimensions in inches
C TEFC

C
D

AB

To Conduit Opening

A TEFC
D

To Conduit Opening

Y
X

B
B

HD

C4410
only

C4410
only

HD +1

AA Size
Dia. of Conduit

B
TEFC

2 Adjustment 1
(C114 through C328 only)

HD +1

AA Size
Dia. of Conduit

2 Adjustment 1

56 to 140 Frame Motors

180 to 360 Frame Motors

Pump and Motor Dimensions with Easy-Clean Totally Enclosed Motors

Pump
Model
C114

C216

C218

C328

C4410

Frame
FF56C
FF140TC
182/184TC
FF56C
FF140TC
182/184TC
213/215TC
254/256TC
FF140TC
182/184TC
213/215TC
254/256TC
284/286TC
324TC
FF140TC
182/184TC
213/215TC
254/256TC
284/286TC
324/326TC
213/215TC
254/256TC
284/286TC
324/326TC

C*

C**

D*

D**

HD

AA

AB

7.28
7.28
12.50
7.28
7.28
12.50
14.13
17.38
7.28
12.5
14.13
17.38
20.19
23.69
7.28
12.50
14.13
17.38
20.19
23.69
14.13
17.38
20.19
23.69

9.12
9.12
11.19
9.12
9.12
11.69
13.69
15.38
9.12
11.69
13.19
15.38
16.94
19.00
9.12
11.69
13.79
15.38
16.94
19.00
10.69
12.88
14.44
16.50

21.23
21.23
21.81
21.39
21.38
22.03
26.28
31.34
21.66
22.31
25.81
31.13
33.47
36.41
22.91
22.94
26.44
31.75
34.13
37.06
29.63
34.06
36.44
40.63

21.48
21.48
22.06
21.64
21.63
22.28
26.53
31.59
21.91
22.56
26.06
31.38
33.72
36.66
23.41
23.44
26.94
32.25
34.63
37.56
30.13
34.56
36.94
41.13

17.16
17.16
14.44
17.31
17.31
14.66
16.91
20.03
17.59
14.94
16.44
19.81
20.91
22.47
18.84
15.56
17.06
20.44
21.56
23.13
20.25
22.75
23.88
26.69

17.41
17.41
14.69
17.56
17.56
14.91
17.16
20.28
17.84
15.19
16.69
20.06
21.16
22.79
19.34
16.06
17.56
20.94
22.06
23.63
20.75
23.25
24.38
27.19

5.48
5.48
7.00
5.48
5.48
7.00
7.75
8.75
5.48
7.00
7.75
8.75
9.50
10.50
5.48
7.00
7.75
8.75
9.50
10.50
5.25
6.25
7.00
8.00

0.50

0.75
0.50

7.19
-

0.75
1.00
1.25
0.50
0.75
1.00
1.25
1.50

7.19
9.06
10.00
7.19
9.06
10.00
12.06

0.50
0.75
1.00
1.25
1.50

7.19
9.06
10.00
12.06

1.00
1.25
1.50
2.00

8.69
10.06
12.06
13.06

* With Tri-Clamp connections.

** With threaded bevel seat connections.

Dimensions are approximate and for guidance only. On application where exact dimensions are required, contact Alfa Laval.
Note! 1- Dimensions for single phase #140 frame motors 1 M\cx longer.

C Series Close-Coupled Centrifugal Pump

Dimensions in inches
C TEFC

C
D

AB

To Conduit Opening

A TEFC
D

To Conduit Opening

Y
X

B
B

HD

C4410
only

AA Size
Dia. of Conduit

C4410
only

HD +1

TECF

2 Adjustment + 1
(C114 through C328 only)

HD +1

AA Size
Dia. of Conduit

2 Adjustment +1

56 to 140 Frame Motors

180 to 360 Frame Motors

Pump Dimensions with Easy-Clean Totally Enclosed Motors

Pump
Model

Suction
(inches)

Discharge
(inches)

X*

X**

Y*

Y**

C114

1.50

1.50

3.63

3.88

1.59

1.84

2.63

C216

2.00

1.50

4.50

4.75

1.91

2.16

3.69

C218

2.00

1.50

5.50

5.75

1.72

1.97

4.75

C328

3.00

2.00

5.50

5.75

2.22

2.72

4.75

C4410

4.00

4.00

7.00

7.50

3.28

3.78

6.00

* With Tri-Clamp connections.

** With threaded bevel seat connections.

SP Series Base-Mounted Centrifugal Pumps

Dimensions in inches

- 14 NPT
C
U

X
HA
HD

K
F
D

H A

L Dia.

Base Dimensions
Pump
Model

SP114

SP216

SP218

SP328

SP4410

Frame
56
143T
145T
182T
184T
56
143T
145T
182T
184T
213T
215T
254T
143T
145T
182T
184T
213T
215T
254T
256T
284TS
286TS
145T
182T
184T
213T
215T
254T
256T
284TS
286TS
324TS
326TS
184T
213T
215T
254T
256T
284T
284TS
286T
286TS
324TS

*E

**E

3.81

**F

HD

4.06

29.06 29.31

6.05

5.00

24.50

0.63

7.75

26

3.56

3.81

36.31 36.56

7.55

8.00

31.50

0.75

10.75

34

4.44

4.69

29.69 29.94

7.05

5.00

24.50

0.63

7.75

26

4.44

4.69

32.69 32.94

7.05

5.00

27.50

0.63

7.75

29

3.94

4.19

36.69 36.94

8.05

8.00

31.50

0.75

10.75

34

4.19

4.44

42.94 43.19

8.30

10.00 37.50

0.75

12.75

40

4.19

4.44

41.94 42.19

9.30

12.50 36.50

0.75

15.25

39

3.59

3.84

33.34 33.59

9.05

8.00

28.50

0.75

10.75

31

3.59

3.84

35.84 36.09

9.05

8.00

31.00

0.75

10.75

33

3.59

3.84

42.34 42.59

9.05

10.00 37.50

0.75

12.75

40

3.97

4.22

46.72 46.97

9.30

12.50 41.50

0.75

15.25

44

3.97

4.22

52.72 52.97

11.05 14.00 47.50

0.75

16.75

50

4.22

4.72

33.97 34.47

9.05

8.00

28.50

0.75

10.75

31

4.22

4.72

36.47 36.97

9.05

8.00

31.00

0.75

10.75

33

4.22

4.72

42.97 43.47

9.05

10.00 37.50

0.75

12.75

40

4.59

5.09

47.34 47.84

9.30

12.50 41.50

0.75

15.25

44

4.59

5.09

53.34 53.84

11.05 14.00 47.50

0.75

16.75

50

4.41

4.91

52.34 52.84

12.05 15.00 46.88

0.88

17.75

49

5.53

6.03

37.78 38.28

9.05

8.00

31.00

0.75

10.75

33

5.53

6.03

44.28 44.78

9.05

10.00 37.50

0.75

12.75

40

5.91

6.41

48.66 49.16

9.30

12.50 41.50

0.75

15.25

44

5.91

6.41

54.66 55.16

11.05 14.00 47.50

0.75

16.75

50

5.72

6.22

53.66 54.16

12.05 15.00 46.88

0.88

17.75

49

* With Tri-Clamp connections.

*F

** With threaded bevel seat connections.

Dimensions are approximate and for guidance only. On application where exact dimensions are required, contact Alfa Laval.

SP Series Base-Mounted Centrifugal Pumps

Dimensions in inches
- 14 NPT

X
HA
HD

K
F
D

H A

L Dia.

Pump Dimensions
Pump
Model

Suction
(inches)

Discharge
(inches)

X*

SP114

1.50

1.50

SP216

2.00

SP218

XX*

C*

C**

NPT
M

Dia.
U

Y*

Y**

3.63

3.88 1.59

1.85

2.63 14.34 14.59 4.05 3.19

- 18 0.63

1.50

4.50

4.75 1.91

2.16

3.69 17.03 17.59 5.05 4.22

2.00

1.50

5.50

5.75 1.72

1.97

4.75 19.19 19.44 6.05 5.50

/2 - 14 1.38

SP328

3.00

2.00

5.50

5.75 2.22

2.72 19.19 20.31 6.05

6.05 5.50

/2 - 14 1.38

SP4410

4.00

4.00

7.00

7.50 4.28

3.78

6.00 21.13 21.63 6.05 7.22

/2 - 14 1.38

/8 - 18 1.00

* With Tri-Clamp connections.

** With threaded bevel seat connections.

Performance Envelopes

C/SP Series Pump 3500RPM

140

350

120

300

100

250

80

200

218
4410

FT

FT

C/SP Series Pump 1750RPM

328

150

60

216

328

218

100

40
216

GPM
Note!

GPM

Alfa Laval does not recommend using the C/SP 4410 pump with 3500RPM motors

Performance envelopes displayed above indicate performance ranges only and are not intended for the purpose of specifying
pumps. See Performance Curves for pump selection information.

700

600

500

400

300

114

200

1200

1100

1000

900

800

700

600

500

400

300

200

100

50
114

100

20

Impeller Sizes

Order Code
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

C/SP Series - Impeller Sizes Per Model Type

Impeller
Model Number
Dia. (in.)
218
114
216
328
10
9
9
9
9
8
8
8

4410

Port Sizes
C/SP Series - Port Sizes Per Model Type
Inlet Size v.
Model Number
Order Code Outlet Size
218
114
216
(in.)

1 x 1
10

20
2 x 1

30
2 x 1
40
3 x 1

50
3x2
4x2
60
70
4x4
80
6x4

328

4410

Options

Equipment
Bevel seat, flanged, NPT or weld connections
Enlarged inlet port size
Grit blasted (industrial), 32Ra (sanitary),
or higher finishes
Casing Drain (216 and 218 only)
John Crane double 9 seal (SP only)
Mounting Base for SP Pump

Material grades
Flourelastomer (SFY) or EPDM (E) elastomers
Seal materials in Carbon or Silicon Carbide

PD 66367 US1 2001-10

How to contact Alfa Laval

Contact details for all countries
are continually updated on our website.
Please visit www.alfalaval.com to
access the information direct.

Ordering
Please state the following when ordering:
Product to be pumped
Density of product
Viscosity of product
Required flow rate (minimum, normal and
maximum
Discharge pressure (closest to the pump outlet)
System suction conditions
Pumping temperature of product (minimum,
normal and maximum)
Cleaning temperature(s) (minimum, normal
and maximum)
Port connection requirements if other than
Tri-Clamp
Voltage and frequency of drive if required
Seal types
Any other options required

The information contained herein is correct at the time of

issue, but may be subject to change without prior notice.