Scribd
Upload
4K views1 page

Metric Tap Drill Size Chart

This document provides a chart of thread sizes and the corresponding recommended drill bit sizes for tapping holes. It includes both course and fine thread sizes ranging from M1 to M68. For each thread size, the recommended tap drill diameter is provided in millimeters. There are over 100 different thread size and drill size pairings listed.

Uploaded by

xyz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

Metric Tap Drill Size Chart

This document provides a chart of thread sizes and the corresponding recommended drill bit sizes for tapping holes. It includes both course and fine thread sizes ranging from M1 to M68. For each thread size, the recommended tap drill diameter is provided in millimeters. There are over 100 different thread size and drill size pairings listed.

Uploaded by

xyz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Metric Thread Drill and Tap Chart

METRICTHREADDrill&TapChart

CourseThreadSizes
ThreadSize

TapDrill
(mm)

ThreadSize

TapDrill
(mm)

ThreadSize

TapDrill
(mm)

Thread
Size

TapDrill
(mm)

M1x0.25

0.75

M3.5x0.6

2.90

M12x
1.75

10.20

M36x4

32.00

0.85

M4x0.7

3.30

M14x2

12.00

M39x4

35.00

0.95

M4.5x
0.75

3.70

M16x2

14.00

1.10

M5x0.8

4.20

M18x2.5

15.50

1.25

M6x1

5.00

M20x2.5

17.50

M48x5

43.00

1.45

M7x1

6.00

M22x2.5

19.50

M52x5

47.00

1.60

M8x1.25

6.80

M24x3

21.00

1.75

M9x1.25

7.80

M27x3

24.00

2.05

M10x1.5

8.50

M30x3.5

26.50

M64x6

58.00

2.50

M11x1.5

9.50

M33x3.5

29.50

M68x6

62.00

M1.1x
0.25
M1.2x
0.25
M1.4x0.3
M1.6x
0.35
M1.8x
0.35
M2x0.4
M2.2x
0.45
M2.5x
0.45
M3x0.5

M42x
4.5
M45x
4.5

M56x
5.5
M60x
5.5

37.50
40.50

50.50
54.50

FineThreadSizes
Thread
Size

TapDrill
(mm)

M4x0.35

3.60

M4x0.5

3.50

M5x0.5

4.50

M6x.5
M6x.75
M7x.75
M8x.5
M8x.75

5.50
5.25
6.25
7.00
7.25

M8x1

7.50

M9x1

8.00

ThreadSize

M10x
0.75
M10x1
M10x
1.25
M11x1
M12x.75
M12x1
M12x1.5
M14x1
M14x
1.25
M14x1.5

TapDrill
(mm)

Thread
Size

TapDrill
(mm)

Thread
Size

TapDrill
(mm)

9.25

M16x1

15.0

M24x1.5

22.5

9.0

M16x1.5

15.0

M24x2

22.0

8.8

M18x1

17.0

M26x1.5

24.5

10.0
11.25
11.0
10.5
13.0

M18x2
M20x1
M20x1.5
M20x2
M22x1

16.0
19.0
18.5
18.0
21.0

M27x1.5
M27x2
M28x1.5
M30x1.5
M30x2

25.5
25.0
26.5
28.5
28.0

12.8

M22x1.5

20.5

M33x2

31.0

12.5

M22x2

20.0

M36x3

33.0

StevenLHenderson'sCuttingEdgeDesigns

You might also like