OPTIMIZING YOUR

SCREENING PROCESS
 A GREAT RANGE
OF SCREENS FOR ALL
APPLICATIONS

Our screens are the result of limits and material size processed. screened with equipment that does
over 50 years of continuous They work on the stratification prin- not rely on vibration as an opera-
development ciple; the vibration of the machine ting principle. Sandvik offers roller
shifts the material bed so that finer screens that are ideal for careful
All critical components have been material passes through the coar- screening of such materials.
field-tested with various appli- ser material. This enables particles
cations. The results have been smaller than the mesh of the screen A FULL RANGE
subject to careful analysis and to pass through it. OF SCREENING MEDIA
compared with our customers An efficient screen also needs
experience and requirements. Screens operating on the free-fall efficient wear protection, dust
principle have been developed encapsulation and screening
Our screens have shown them- as an alternative to conventional media products, thus satisfying
selves to be extremely reliable, screens. They are used success- increased requirements for scre-
economic, easy to use and maintain, fully in both mobile and stationary ening accuracy, clean air, efficient
and suitable for most applications. plants. Sandvik have further devel- production and high up-time.
oped simple free-fall screening by
SCREENS FOR ALL building each deck in several sec- We have a full range of screening
APPLICATIONS tions and optimizing the inclina- media in polyurethane and other
Vibrating equipment commonly tion of the deck sections. Free-fall rubber qualities.
used for separating different grades screens can be built much shorter
of crushed minerals uses either and with smaller footprint than con- Take a closer look at the our range
stratification (screening with a vibra- ventional screens of comparable of machines and media. Our
ting bed) or free-fall screening. capacities. people are the true experts who
can help you optimize your screen-
Conventional screens used in the Sometimes, non-abrasive, soft or ing process!
aggregate industry have great ver- sticky materials and materials with
satility as of regards to separation high moisture content are best

2 SANDVIK SCREENS SANDVIK SCREENS 3

 INCLINED CIRCULAR INCLINED CIRCULAR
MOTION SK SCREENS MOTION SC SCREENS
Our new SK Circular Motion SK SCREENS Our SC Circular Motion Screens SC SCREENS
Screens are specially designed 2 Decks 3 Decks 4 Decks are can be used alike screening 2 Decks 3 Decks 4 Decks
for extra heavy-duty, medium and Weight Weight Weight
applications than SK screens.
Weight Weight Weight
fine screening applications. Dimensions (without Motor (without Motor (without Motor Generally SC screen construction Dimensions (without Motor (without Motor (without Motor
mm screening Size, screening Size, screening Size,
This inclined screen is ideal for Model* media) kg kW media) kg kW media) kg kW
is more robust than SK allowing mm screening Size, screening Size, screening Size,
WL Model * WL media) kg kW media) kg kW media) kg kW
use screening after primary and to receive and process more
SK 154_ 1 500 3 600 3 700 15 4 500 15
secondary crushing, as a splitter coarse feed material size. SC124_ 1 200 3 600 4 200 15 5 100 15
SK185_ 1 800 4 800 4 600 15 6 300 18.5 8 200 22
screen to divide flows within a SC154_ 1 500 3 600 4 700 15

plant, and for final screening of a SK186_ 1 800 6 000 6 100 18.5 8 400 22 ** **
PRODUCT FEATURES SC155_ 1 500 4 800 5 700 18.5 6 800 22
finished fraction. SK216_ 2 100 6 000 6600 18.5 9 000 30 11 400 37

SK246_ 2 400 6 000 7 300 22 10 300 30

Maximized versatility concerning the SC185_ 1 800 4 800 6 200 18.5 8 300 22
** ** screening medias. SC186_ 1 800 6 000 7 400 22 9 800 30 12 000 45

PRODUCT FEATURES SK306_ 3 000 6 000 10 000 30 14 200 45

Acceleration can be increased up to SC215_ 2 100 4 800 7 100 22 9 200 30

Installing different type of screening SK307_ 3 000 7 000 11 800 37 15 500 45 4,5 G depending the application to SC216_ 2 100 6 000 7 900 22 10 900 37
medias and customized engineering SK308_ 3 000 8 000 12 600 37 ensure maximized screening efficiency. SC245_ 2 400 4 800 7 800 22 10 300 37
for many features is possible All dimensions are inside nominal dimensions. Suits also for extremely coarse feed SC246_ 2 400 6 000 9 300 30 12 500 37 15 900 2 30

Possibility for acceleration rate of * The number of decks are added at the end of the code. For example, SK1542 has two decks.
** 4-deck models available, values to be given by request.
material. SC247_ 2 400 7 200 10 500 37 14 600 45
max. 3.5 G results in increased Movement control with friction brakes SC278_ 2 700 8 400 14 400 45 19 800 2 37
performance as standard.
SC306_ 3 000 6 000 12 200 37 18 300 2 30
Drive assembly and modular mecha- Ready holes for washing pipes as SC307_ 3 000 4 200 14 400 45 20 600 2 37
nism are designed for easy servicing standard.
SC308_ 3 000 8 400 17 800 2 30 22 300 2 37
and maintenance
Longer feed box and discharge lips
A numerous variation of options Wide-ranging variation of options
All dimensions are inside nominal dimensions.
* The number of decks are added at the end of the code. For example, SC1242 has two decks.
available available.
Using long lifetime components gives
decreased maintenance costs and
minimized downtime SK-range SC-range

Rotation speed 780 900 rpm Rotation speed 600 1 100 rpm
Stroke 7 12 mm Stroke 5 13 (17) mm
G-force up to 3.5 G G-force up to 3.5 G (4,5 G with low bed depth)
Inclination 15 to 22 deg Inclination 15 to 20 deg
Separation 1 130 mm Separation 1 140 mm
Max feed size 200 mm Max feed size 300 mm

4 SANDVIK SCREENS SANDVIK SCREENS 5

 INCLINED CIRCULAR LINEAR MOTION LF
MOTION MSO SCREENS SCREENS
Our MSO Circular Motion Screens CLASSIFICATION SCREEN MSO Our LF Linear Motion Screens LINEAR MOTION LF SCREEN
are specially designed for extra are designed for accurate
heavy-duty, medium and fine Type S, 1 Deck Type D, 2 Decks Type T, 3 Decks secondary screening and final Type S, 1 Deck Type D, 2 Decks Type T, 3 Decks
screening applications. Weight Weight Weight sizing, as well as scalping ahead Weight Weight Weight
Dimensions (without Motor (without Motor (without Motor of crushers in mining applications. Dimensions (without Motor (without Motor (without Motor
mm screening Size, screening Size, screening Size, mm screening Size, screening Size, screening Size,
It is a high-capacity machine that Model* WL media) kg kW media) kg kW media) kg kW Model* WL media) kg kW media) kg kW media) kg kW
has been engineered to increase LF screens are an ideal choice
MSO1030_ 1 000 3 000 1 630 5.5 2 200 2 5.5 2 780 2 5.5 LF1030_ 1 000 3 000 1 990 2 5.5 2 450 2 5.5 3 040 2 5.5
material speed at the feed end in conditions where the height is
MSO1230_ 1 200 3 000 1 720 5.5 2 400 2 5.5 LF1230_ 1 200 3 000 2 130 2 5.5 2 770 2 5.5
and decrease it at the discharge limited by surrounding facilities,
MSO1240_ 1 200 4 000 2 320 2 5.5 2 900 2 5.5 3 920 2 5.5 LF1240_ 1 200 4 000 2 650 2 5.5 3 530 2 11 4 250 2 11
end, resulting in far more accurate for screening small and short
MSO1540_ 1 500 4 000 2 620 2 5.5 3 530 15 4 510 15 LF1540_ 1 500 4 000 2 890 2 5.5 3 880 2 11 4 680 2 11
screening. fractions, and when heavy
MSO1550_ 1 500 5 000 3 150 2 5.5 4 020 15 5 140 15 material is loaded on the screen. LF1550_ 1 500 5 000 3 770 2 11 4 350 2 11 6 000 2 15

MSO1850_ 1 800 5 000 3 890 15 4 780 15 7 520 15 LF1850_ 1 800 5 000 4 220 2 11 5 160 2 11 8 300 2 15
PRODUCT FEATURES
MSO1860_ 1800 6 000 4 380 15 6 860 22 8 280 22 LF1860_ 1 800 6 000 4 700 2 11 6 680 2 15 10 100 2 22
Installation of the mechanism on the MSO2160_ 2 100 6 000 4 800 15 7 660 22 9 890 22
PRODUCT FEATURES
LF2160_ 2 100 6 000 5 150 2 11 7 460 2 15 11 810 2 22
top of the screen body offers easy
maintenance. MSO2460_ 2 400 6 000 5 410 15 8 830 22 13 660 22
Linear stroke improves screening and LF2440_ 2 400 4 000 4 500 2 11 9 500 2 22
increases productivity.
Suitable wear protection for heavy MSO2470_ 2 700 7 000 10 800 30
Easy maintenance due to mechanism LF2450_ 2 400 5 000 10 200 2 22

mining applications available. All dimensions are inside nominal dimensions. installation on the top of the screen LF2460_ 2 400 6 000 6 580 2 15 11 000 2 22 13 340 2 30

Robust construction enables screening NOTE: Heavy-duty Mining version available for all models (combination of options).
* The number of decks are added at the end of the code by a letter (S, D or T).
body. LF2470_ 2 400 7 000 7 280 2 15 12 200 2 22 15 650 2 30
of high bulk density materials. For example MSO1540S has one deck. Suitable wear protection for heavy LF2770_ 2 700 7 000 14 350 2 30

Elliptic stroke with high material speed mining applications available. LF3060_ 3 000 6 000 13 360 2 30 14 000 2 30
on feed end and low material speed
on discharge end gives maximum
Compact design and horizontal or LF3070_ 3 000 7 000 15 430 2 30
low slope angle allows installation in
All dimensions are inside nominal dimensions.
capacity and screening efficiency. height limited locations. NOTE: Heavy-duty Mining version available for all models (combination of options).

Robust construction enables screening * The number of decks are added at the end of the code by a letter (S, D or T). For example LF1550T has three decks.

MSO-range of high bulk density materials. LF-range

Rotation speed 730 940 rpm Plenty of options available for different Rotation speed 730 940 rpm
Stroke 4 16 mm kind of applications. Stroke 5 16 mm
G-force up to 5.0 G (at discharge end) G-force up to 5.0 G
Inclination 15 to 20 deg Inclination -3 to 10 deg
Separation 2 140 mm Separation 2 100 mm
Max feed size 300 mm Max feed size 300 mm

6 SANDVIK SCREENS SANDVIK SCREENS 7

 SS AND SF
SG GRIZZLY SCREENS FREE-FALL SCREENS
Our SG Grizzly Screens are robust SG GRIZZLY SCREEN Our SS and SF Free-Fall Screens SS AND SF FREE-FALL SCREENS
linear-motion screens designed 1 Deck 2 Decks are compact and high-capacity Dimensions, mm Weight, Motor Size,
for heavy-duty scalping, and the Weight Weight screens designed to handle large Model WL kg kW
Dimensions, mm (with grizzlies, (with grizzlies, Motor Size,
removal of fines from the feed Model WL gap 100 mm) kg gap 100 mm) kg kW loads of material despite their SS1012 1 000 1 330 1 000 2 2.0
before primary crushing. modest size. These screens have
SG1231 1 200 3 000 4 150 2 7.5 SS1013H 1 000 1 460 1 300 2 2.6
steeply inclined decks and a linear
SG1531 1 500 3 000 4 720 2 7.5 SS1223 1 200 2 435 1 800 2 3.0
These screens are ideal for tough throw.
SG1831 1 800 3 000 6 100 2 11 SS1233 1 200 2 500 2 000 2 3.0
primary screening of blasted
SG1541 1 500 3 900 6 220 2 11 SS1233H 1 200 2 990 2 700 2 5.5
rock, ripped rock and gravel with SS screens are often used for
a high fines content. SG1841 1 800 3 900 7 500 2 11 instance instead of a slot sizer SS1433 1 400 2 500 2 600 2 5.5

SG2141 2 100 3 900 9 260 2 18.5 to remove natural fines before SS1633H 1 600 2 920 4 450 2 5.8

PRODUCT FEATURES SG1851 1 800 4 800 10 500 2 18.5 crushers and SF screens for SS1823 1 800 2 645 3 800 2 8.5

Double shaft mechanism generates SG2151 2 100 4 800 11 640 2 18.5 instance screening crushed SS1833 1 800 2 645 3 800 2 8.5
an linear stroke that gives better SG2451 2 400 4 800 13 200 2 18.5 stone to asphalt fractions and SF1443 1400 3 540 3 200 2 8.5
performance. SG1242 1 200 3 900 6 100 2 11 to railway ballast. SF1843 1 800 4 290 6 100 2 11.5

Versatile adjustment possibilities SG1542 1 500 3 900 7 600 2 11 SF1844 1 800 4 290 7 700 2 14.5
enables best achievable screening SG1842 1 800 3 900 9 650 2 18.5
PRODUCT FEATURES
All dimensions are inside nominal dimensions. Motor power at 50 Hz net.
performance.
SG2452X 2 400 5 160 20 500 2 37 Compact size (small foot print, low
Large separation range available with All dimensions are inside nominal dimensions.
weight, low dynamic loads) allows
one or two deck construction. light support structure design and
easy installation.
High acceleration keeps the grizzly
section clean. Economical to use because of the
low power consumption.
High capacity due to the free-fall
principle enabling a quick removal
SG-range SS-range SF-range
of large amounts of fines.
Rotation speed
Stroke
700 980 rpm
5 14 mm
Simple drive system by two un- Rotation speed
Stroke
864 1 152 rpm
5.5 9 mm
864 960 rpm
8 9 mm
balanced vibrating motors, no gears.
G-force up to 4.5 G
Easy to encapsulate to protect G-force up to 5.0 G up to 5.0 G
Inclination 5 to 10 deg environment against dust. Inclination std std
Separation 60 250 mm Separation 2 100 mm 2 64 mm
Max feed size 500 1 500 mm Max feed size 120 350 mm 120 mm

Values are dependent of the actual screen model. Values are dependent of the actual screen model.

8 SANDVIK SCREENS SANDVIK SCREENS 9

 SR roller grizzly

SR roller screen crusher

SR roller screen

SR-ROLLER SCREENS
Our SR Roller Screens are com- SR-ROLLER GRIZZLY, PRIMARY SR-ROLLER SCREEN SR-ROLLER SCREEN CRUSHER
pact, non-vibrating roller grizzlies,
Dimensions Weight Motor Motor
roller screens and roller screen Model
mm W L kg Size kW Model
Dimensions
mm W L
Weight
kg
Motor
Size kW
Dimensions
Model
Weight
mm W L kg * power kW *

crushers ideal for use with non-
SR1221 1 200 2 000 7 200 22 SR1234 1 200 2 500 5 200 2 7.5 SR1039 1 000 4 500 8 000/9 100 37,5/52.5
abrasive materials like coal and
SR1521 1 500 2 000 7 900 22 SR1534 1 500 2 500 5 900 2 7.5 SR1539 1 500 5 000 9 800/11 500 52.5/67.5
limestone, even when materials
SR1821 1 800 2 000 8 600 30
are wet and sticky. SR2144 2 100 4 000 11 900 4 7.5 SR1549 1 500 6 000 10 950/12 400 52.5/67.5
SR2131 2 100 2 000 15 100 2 22 SR2454 2 400 5 000 16 700 5 7.5 SR2049 2 000 6 000 11 700/13 500 59.5/81.5

Roller grizzly and roller screen SR2431 2 400 2 000 15 500 2 22 SR2464 2 400 6 000 19 500 6 7.5 SR2069 2 000 8 000 14 900/16 700 74.5/96.5
are a high-capacity equipment SR1541 1 500 4 000 14 500 2 22 SR2474 2 400 7 000 23 200 6 7.5 All dimensions are inside nominal dimensions.
and easy to encapsulate against SR1841 1 800 4 000 15 500 2 22 SR1035 1 000 2 500 4 000 7,5 * Values are for machine without/with pre-crusher.
Motor power informed as total input power for
noise and dust. SR2141 2 100 4 000 16 500 2 22 SR1535 1 500 3 000 4 200 2 7.5 several motors.
SR2441 2 400 4 000 18 500 2 22 SR2045 2 000 4 000 7 500 3 7.5
Roller screen crusher is de- SR1861 1 800 6 000 24 500 3 30 SR2065 2 000 6 000 11 200 4 7.5
signed for washed coal and is SR2161 2 100 6 000 26 500 3 30 SR1237 1 200 2 500 3 500 2 5.5
already a fully encapsulated unit. SR2461 2 400 6 000 28 500 3 30 SR1537 1 500 3 000 5 000 3 5.5

All dimensions are inside nominal dimensions. SR2147 2 000 4 000 8 000 4 5.5
All models available also for secondary duty. SR2167 2 000 6 000 13 400 6 5.5
PRODUCT FEATURES
SR2477 2 400 6 500 16 000 10 5.5
No vibration, thus lighter supporting
structure requirements. All dimensions are inside nominal dimensions.

Screens wet and sticky materials

without blinding, giving increased
screening efficiency with difficult
materials.
Easy to encapsulate (to minimize Rotation speed 25 40 rpm Rotation speed 80 300 rpm Rotation speed 100 150 rpm
dust and noise emissions).
Inclination 5 15 deg Inclination 0 deg Inclination 0 deg
Reliable efficiency and efficient Separation 50 180 mm Separation 5 80 mm Separation 20 80 mm
screening action means that mini-
Max feed size 1 500 / 400 mm Max feed size 300 mm Max feed size 300 mm
mized screening area and optimized
screen size can be used. Values are dependent of the actual screen model. Values are dependent of the actual screen model. Values are dependent of the actual equipment.

10 SANDVIK SCREENS SANDVIK SCREENS 11

B5-150 ENG Sandvik SRP AB 2014. Subject to alteration without prior notice

WWW.CONSTRUCTION.SANDVIK.COM