1074 Quad Noise Gate
The latest addition to the 10 Series product line, the dbx 1074 QuadGate , is the perfect
companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth
and release controls on each channel. The 1074, like the rest of the products in dbxs 10
Series, is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4
Key input. In addition to an external key input per channel, the 1074 also has an internal fil-
ter that can be independently activated and controlled on a channel-per-channel basis. This
filter allows the 1074 to not only clean up tracks, but gives you frequency selective control
on each gate, to open exactly when you want it to. These features combined, make the
1074 an absolute must for those who require quad gating on applications including: Gating
dry and percussive sounds such as snare drum and kick drum, gating sounds that
have longer decay times such as cymbals and Pianos, gating hum or buzz from live
instruments or recorded tracks or eliminating headphone leakage into microphones. Gating
instrument microphones to eliminate amplifier bleed.
From the company that has been redefining the standard of signal processing for more than
30 years, dbx Professional Products comes a bulletproof product that caters to the scrutiniz-
ing needs of those who require the precision noise gating capabilities. Once again, the engi-
neering staff at dbx Professional Products have taken technology that has been over three
decades in the making and have created a product that is flexible, versatile and rock solid in con-
struction design. The 1074s independent channel design with key filtering capabilities make it the
perfect tool for countless applications.
Four independent channels of True RMS level detection
gating Stereo Coupling mode
Independent key filtering Switchable +4dBu or -10dBv oper-
Independent Threshold and ation per channel
Release controls
Differentially balanced gold-plat-
ed XLR and 1/4" inputs and out-
8760 S. Sandy Pkwy.
puts Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Intl Fax (801) 568-7583
customer@[Link]
[Link]
A Harman International Company
18-0007-A 11/01
1074 Quad Noise Gate
Input Power Supply
Connectors: XLR (Pin 2 and tip hot) Operating Voltage: 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Type: Electronically balanced/unbalanced, RF filtered Power Consumption: 30 Watts
Impedance: Balanced > 50 kOhm, unbalanced >25 kOhm Fuse: 100-120 VAC:300 mA Slow Blow
Max Input Level: > +22 dBu balanced or unbalanced 200-240 VAC: 160 mA Type T
CMRR: 40dB: Typically >55 dB at 1 kHz Mains Connection: IEC receptacle
Key Input: Electronically balanced/unbalanced, RF filtered Balanced 50 kOhm, unbalanced >25
kOhm Physical
Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Output Weight: 6.9 lbs.
Connectors: XLR (Pin 2 hot) Shipping Weight: 9.3 lbs.
Type: Servo-balanced/unbalanced, RF filtered
Impedance: Balanced 60 Ohm, unbalanced 30 Ohm
Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced
System Performance
Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response: 0.35 Hz to 200 kHz, +0/-3 dB
Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range: > 115 dB, unweighted
THD+Noise: 0.008% typical at +4 dBu, 1 kHz unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz
Stereo Coupling: True RMS Power Summing
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
customer@[Link]
[Link]
A Harman International Company
