Scribd
Upload
266 views1 page

Shell and Tube Refrigerant Condenser

The document is a specification sheet for a shell and tube condenser from Alfa Laval. It provides details on the required capacity, dimensions, materials, and operating conditions for both the tube side (water) and shell side (R134a refrigerant) of a 4-pass CPS-LF model condenser with an exchange surface area of 2.09 square meters. Key parameters for both the water and refrigerant streams are listed, including temperatures, pressures, flow rates, and volumetric information.

Uploaded by

bevarsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
266 views1 page

Shell and Tube Refrigerant Condenser

The document is a specification sheet for a shell and tube condenser from Alfa Laval. It provides details on the required capacity, dimensions, materials, and operating conditions for both the tube side (water) and shell side (R134a refrigerant) of a 4-pass CPS-LF model condenser with an exchange surface area of 2.09 square meters. Key parameters for both the water and refrigerant streams are listed, including temperatures, pressures, flow rates, and volumetric information.

Uploaded by

bevarsi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ALFA LAVAL

VIA DELLE ALBERE 36045 ALONTE (VI) ITALY

SHELL and TUBE CONDENSER


smarTube 2.4 - European Products
Customer
Reference
Date 13.11.2013

Series CPS-LF
Model CPS45-LF
Configuration Tower
No. of passes 4
Tube material CU

Required capacity 22.80 kW


Required brine temp. In/Out 32.00 / 36.00 C
Calculated capacity 23.86 kW
Margin +4.6 %
PED CATEGORY II -
Exchange surface (ext.) 2.09 m2

TUBE SIDE
Fluid Water
Temperature In/Out 32.00 / 36.19 C
Flow rate 4.944 m3/h
Pressure drop 22.36 kPa
Velocity inside tubes 1.80 m/s
Fouling factor 4.30E-05 m2K/W
Mean density 993 kg/m3
Mean specific heat 4179 J/kgK
Mean thermal conductivity 0.623 W/mK
Mean viscosity 0.73 cP

SHELL SIDE
Fluid R134a
Inlet vapor temperature 85.00 C
Superheating DT 45.00 K
Dew cond. temperature 40.00 C
Condensing pressure (a) 10.17 bar
Bubble point temperature 40.00 C
Subcooling DT 3.00 K
Flow rate 0.111 kg/s
Pressure drop 737 Pa
Tc (dew) at required capacity 39.72 C

Refrigerant side volume 10.30 dm3


Brine side volume 2.90 dm3
Refrigerant reserve volume 1.90 dm3
ODshell x L 168 x 800 mm
Std brine connections (in-out) 1" 1/2 - 1" 1/2
Std refr. connections (in-out) RC28 - RB22

NOTES

You might also like