Features Modular progressive
Integral porting adapter
for simple single or distributors SMX
Stainless Steel AISI 316
double outlet conversion,
thus providing reduced
stock by eliminating
external crossports and
singling bars.
Easy and flexible assembly and low cost
Air bleed valves built
into base maintenance
BSP threads available
Operates up to 500 bar
(7.200 PSI)
Operates with Oil or
Grease
Full monitoring controls
The components are
zinc-plated
The bases are always
supplied complete with
standard O rings and
fixing screws
Advantages
Conventional tie rods
are eliminated. There is
no maximum limitation
on the number of
elements which can be The modular system consists principle enables factory floor
used on the assembly. of two main components: the distributor assembly to
Auxiliary by-pass base and the metering accommodate grouping of
elements can be elements. lubrication points.
installed in the
assembly to The modular progressive The base assembly can be
accomodate an distributor is available in two mounted and piped up
increase or decrease in versions: stainless steel Aisi without the metering
points without 316. elements. This provides the
disturbing the base
assembly or pipework Conventional bridging pieces most advantageous routing of
are eliminated. Bridging pipe work and the elements
Lubricant volume can
be easily increased or elements have been can then be fitted to suit.
decreased during introduced and these Due to the modular concept,
system commissioning
or service without interconnect and discharge the system can be easily
disturbing the base into the adjacent element. extended with extra
assembly or pipework components at a low cost.
The distributor assembly
Automatic Lubrication Systems
Delivery and Dimensions
SMX METERING ELEMENTS
DELIVERY PER 1 OR 2 OUTLETS
OUTLET
CU. IN. Cm3 Symbol AISI 316
.0024 .04 SMX 04 646524
.005 .08 SMX 08 646516
.010 .16 SMX 16 646517
.015 .25 SMX 25 646518
.021 .35 SMX 35 646519
.025 .40 SMX 40 646520
.030 .50 SMX 50 646521
.036 .60 SMX 60 646522
.040 .65 SMX 65 646523
SM X D I M E N S I O N S
A B C D
mm in mm in mm in mm in
20 0.78 20.2 0.78 23.42 0.91 35 1.36
E F G
mm in mm in mm in
12.5 0.72 30 1.17 56 2.2
SMX DIMENSIONS
A B
No.
mm in mm in
Elements
3 93,02 3.6 83,02 3.2
4 116,44 4.5 106,44 4.1
5 139,86 5.4 129,86 5.1
6 163,28 6.4 153,28 6.1
7 186,70 7.2 176,70 6.9
8 210,12 8.2 200,12 7.8
9 233,53 9.1 223,53 8.7
10 256,95 10.1 246,95 9.6 SM X D I M E N S I O N S
11 280,37 10.9 270,37 10.5 Type C D E
12 303,79 11.8 293,79 11.4 mm in. mm in. mm in.
13 327,21 12.8 317,21 12.4 SMX 5,0 2 44,45 1.73 76 2.9 7.2
14 350,63 13.7 340,63 13.3
15 374,05 14.6 364,05 14.2
16 397,47 15.5 387,47 15.1
17 420,89 16.4 410,89 16.1
18 444,30 17.3 434,30 16.9
19 467,72 18.2 457,72 17.8
20 491,14 19.1 481,14 18.8
The base
The base is made up of a
minimum of three segments: Monitoring of piston movement
By a Micro Switch
Inlet base
Intermediate base
End Base
And can be increased in
unlimited number by addition of
intermediate sections.
This revolutionary system
makes the assembly easy and
flexible; there is no need to
determine in advance the size
of the base, just add on
distributors in unlimited number
by means of very simple
threaded inserts supplied for
the assembly (Patented).
This simple technique allows
the system to operate even
at very high pressure without
any leakage in the assembly.
There is also the possibility
of ordering with one part
number only, the end base +
the intermediate base
already assembled. Simply
add on the inlet base and
you have a three base
assembly.
With just 3 screws!
SMX
Ref. Description
AISI 316
Inlet Thread 1/4 BSP
Outlet Thread 1/8 BSP
1 End Base 646515
2 Intermediate base 646513
3 Inlet base 646512
4 Check Valve 519335
5 Plug 646254
6 Bridge Plate Left - Right 646223
7 Bridge Plate Left 646221
8 Bridge Plate Right 646220
9 Bridge Plate Single outlet 646222
10 White adaptor for single outlet 646251
11 Yellow adaptor for two separate outlets 646250
12 Holding Disc 641791
13 Holding Viton O ring
Contacts
How to order
[Link] Base Assy Meter Units
sales@[Link]
UNI ISO OPTIONAL ELEMENTS
ITALIA NPTF
Bridge right R
Dropsa SpA Bridge left L
BASE AND METER UNIT Bridge right/left BB
t. +39 02-250791 Pin indicator C
S. Steel Aisi 316 316
f.+39 02-25079767 Micro switch CT
Inductive sensor CP
N.O. Reed switch CC
O Rings Change Over reed switch GX
U.K. Buna - Pin and N.O. reed switch GC
Viton V Pin and change over
Dropsa (UK) Ltd reed switch GXC
Dow-Corning O Ring for low
t. +44 (0)1784-431177 temperature is available on request
f. +44 (0)1784-438598
BASE ASSY OUTLETS
For 3 meter units 3 Single outlet in the left S
GERMANY For 4 meter units 4 Single outlet in the right D
Dropsa GmbH ..................................................
For 20 meter units 20 Cu. In. Marking Cc. Marking
t. +49 (0)211-394-011
.008 03 0,04 04
f. +49 (0)211-394-013 .005 05 0,08 08
.010 10 0,16 16
.015 15 0,25 25
.020 20 0,35 35
FRANCE .025 25 0,40 40
Dropsa Ame .030 30 0,50 50
.035 35 0,60 60
t. +33 (0)1-3993-0033 .040 40 0,65 65
By pass 00 By pass 00
f. +33 (0)1-3986-2636 Bridge Plate - Right
CHINA
Dropsa Lubrication Systems Order Example
(Shanghai) Co.,Ltd
t. +86 (021) 67740275 SMX 6 (M25 M50LR M50CP
f. +86 (021) 67740205 Bridge Plate Left -Right 00 M65R M16C)
Note: the assembly is seen vertically
U.S.A.
and the outlets are in sequence;
Dropsa Corporation
starting from the bottom (inlet) from
t. +1 586-566-1540
left to right. Symbol LR refers to
f. +1 586-566-1541
bridge elements.
AUSTRALIA
Dropsa Australia Ltd.
UltraSensor - Sensor for SMX
t. +61 (0)2-9938-600644
f. +61 (0)2-9938-6611
LED Signal
BRAZIL Connector
Hall effect Sensor
Dropsa
t. +55 (0)11-563-10007
f. +55 (0)11-563-19408
Magnet
Technical Characteristics
Sensing range Material AISI 316
Max cycles per minute 1000
WK 09/09
Voltage (V DC) 8 28 V DC
NPN 2A N.O.
Output signals
Description Part. No. PNP 0,7A N.O.
Sensor for SMX 1655301 -10 C +60
Dealer:
Operating temperature C (-4 F
C2111PE
Connector 39999
+158 F)
Connector M12x1
Protection degree IP 67
